Netskope Certified Cloud Security Architect NSK300 Dumps in PDF

Free Netskope NSK300 Real Questions (page: 3)

Review the exhibit.



You are the proxy administrator for a medical devices company. You recently changed a pilot group of users from cloud app steering to all Web traffic. Pilot group users have started to report that they receive the error shown in the exhibit when attempting to access the company intranet site that is publicly available. During troubleshooting, you realize that this site uses your company's internal certificate authority for SSL certificates.
Which three statements describe ways to solve this issue? (Choose three.)

  1. Import the root certificate for your internal certificate authority into Netskope.
  2. Bypass SSL inspection for the affected site(s).
  3. Create a Real-time Protection policy to allow access.
  4. Change the SSL Error Settings from Block to Bypass in the Netskope tenant.
  5. Instruct the user to proceed past the error message

Answer(s): A,B,D

Explanation:

A . Import the root certificate for your internal certificate authority into Netskope:
This step ensures that Netskope recognizes and trusts SSL certificates issued by your company's internal certificate authority. By importing the root certificate, you enable proper SSL inspection and validation for internal sites.
B . Bypass SSL inspection for the affected site(s):
Since the intranet site uses your company's internal certificate authority, bypassing SSL inspection for this specific site allows users to access it without encountering SSL errors. D . Change the SSL Error Settings from Block to Bypass in the Netskope tenant:
Adjusting the SSL Error Settings to "Bypass" allows users to proceed past SSL errors, including self- signed certificate errors. This ensures uninterrupted access to the intranet site.


Reference:

Netskope Security Cloud Introductory Online Technical Training Netskope Security Cloud Operation & Administration (NSCO&A) - Classroom Training

Netskope Cloud Security Certification Program



Review the exhibit.



You created an SSL decryption policy to bypass the inspection of financial and accounting Web categories. However, you still see banking websites being inspected. Referring to the exhibit, what are two possible causes of this behavior? (Choose two.)

  1. The policy is in a "disabled" state.
  2. An incorrect category has been selected
  3. The policy is in a "pending changes" state.
  4. An incorrect action has been specified.

Answer(s): B,D

Explanation:

The issue described in the exhibit is that banking websites are still being inspected despite creating an SSL decryption policy to bypass the inspection of financial and accounting web categories.
Possible Causes:
An incorrect category has been selected (Option B):
If the SSL decryption policy is configured to bypass the wrong category (e.g., not the actual financial and accounting category), it won't effectively exclude banking websites from inspection.
An incorrect action has been specified (Option D):
If the action specified in the policy is not set to "Bypass," it won't achieve the desired behavior. The policy should explicitly bypass SSL inspection for the selected category.
Solution:
Verify that the correct category (financial and accounting) is selected in the policy, and ensure that the action is set to "Bypass."



You deployed the Netskope Client for Web steering in a large enterprise with dynamic steering. The steering configuration includes a bypass rule for an application that is IP restricted.
What is the source IP for traffic to this application when the user is on-premises at the enterprise?

  1. Loopback IPv4
  2. Netskope data plane gateway IPv4
  3. Enterprise Egress IPv4
  4. DHCP assigned RFC1918 IPv4

Answer(s): C

Explanation:

When a user is on-premises at the enterprise and accesses an application that is IP restricted, the source IP for traffic to this application is the Enterprise Egress IPv4 address. The Enterprise Egress IP represents the external IP address of the enterprise network as seen by external services or applications.
This IP address is used for communication between the user's device and external resources, including applications that are IP restricted.


Reference:

The answer is based on general knowledge of networking concepts and how IP addresses are used in enterprise environments.



You do not want a scheduled Advanced Analytics dashboard to be automatically updated when Netskope makes improvements to that dashboard. In this scenario, what would you do to retain the original dashboard?

  1. Create a new dashboard from scratch that mimics the Netskope dashboard you want to use.
  2. Copy the dashboard into your Group or Personal folders and schedule from these folders.
  3. Ask Netskope Support to provide the dashboard and import into your Personal folder.
  4. Download the dashboard you want and Import from File into your Group or Personal folder.

Answer(s): D

Explanation:

To retain the original dashboard without automatic updates due to improvements made by Netskope, you can download the desired dashboard and then import it from a file into your Group or Personal folder.
This approach ensures that you have a static version of the dashboard that won't be affected by future changes or enhancements.


Reference:

The answer is based on general knowledge of dashboard management and customization within Netskope.



You have multiple networking clients running on an endpoint and client connectivity is a concern. You are configuring co-existence with a VPN solution in this scenario, what is recommended to prevent potential routing issues?

  1. Configure the VPN to split tunnel traffic by adding the Netskope IP and Google DNS ranges and set to Exclude in the VPN configuration.
  2. Modify the VPN to operate in full tunnel mode at Layer 3. so that the Netskope agent will always see the traffic first.
  3. Configure the VPN to full tunnel traffic and add an SSL Do Not Decrypt policy to the VPN
    configuration for all Netskope traffic.
  4. Configure a Network Location with the VPN IP ranges and add it as a Steering Configuration exception.

Answer(s): B

Explanation:

To prevent potential routing issues and ensure that the Netskope agent consistently sees the traffic first, it is recommended to modify the VPN to operate in full tunnel mode at Layer 3. In full tunnel mode, all traffic from the endpoint is routed through the VPN, including traffic destined for Netskope. This ensures that the Netskope agent can inspect and apply policies to all traffic, regardless of the destination.
Layer 3 full tunnel mode provides better visibility and control over the traffic flow, reducing the risk of routing conflicts or bypassing the Netskope inspection.


Reference:

The answer is based on general knowledge of VPN configurations and their impact on traffic routing.



Share your comments for Netskope NSK300 exam with other users:

O
onibokun10
4/13/2026 7:50:14 PM

Question 129:
Correct answer: CNAME

  • A CNAME record creates an alias for a domain, so newapplication.comptia.org will resolve to whatever IP address www.comptia.org resolves to. This ensures both names point to the same resource without duplicating the IP.
  • Why not the others:
- SOA defines authoritative information for a zone. - MX specifies mail exchange servers. - NS designates name servers for a zone.
  • Notes: The alias name (newapplication.comptia.org) should not have other records if you use a CNAME for it, and CNAMEs aren’t used for the zone apex (root) domain. This scenario uses a subdomain, so a CNAME is appropriate.

A
Anonymous User
4/13/2026 6:29:58 PM

Question 1:

  • Correct answer: C

  • Why this is best:
- Uses OS Login with IAM, so SSH access is granted via Google accounts rather than distributing per-user SSH keys. - Granting the compute.osAdminLogin role to a Google group gives admin access to all team members in a centralized, auditable way. - Access is auditable: Cloud Audit Logs show who accessed which VM, satisfying the security requirement to determine who accessed a given instance.
  • How it works:
- Enable OS Login on the project/instances (enable-oslogin metadata). - Add the team’s

A
Anonymous User
4/13/2026 1:00:51 PM

Question 2:

  • Answer: D. Azure Advisor

  • Why: To view security-related recommendations for resources in the Compute and Apps area (including App Service Web Apps and Functions), you use Azure Advisor. Advisor surfaces personalized best-practice recommendations across resources, including security, and shows which resources are affected and the severity.

  • Why not the others:
- Azure Log Analytics is for ad-hoc querying of telemetry, not for viewing security recommendations. - Azure Event Hubs is for streaming telemetry data, not for security recommendations.
  • Quick tip: In the portal, navigate to Azure Advisor and check the Security recommendations for App Services to see actionable items and affe

D
Don
4/11/2026 5:36:42 AM

Recommend using AI for Solutions rather the Answer(s) submitted here

M
Mogae Malapela
4/8/2026 6:37:56 AM

This is very interesting

A
Anon
4/6/2026 5:22:54 PM

Are these the same questions you have to pay for in ExamTopics?

L
LRK
3/22/2026 2:38:08 PM

For Question 7 - while the answer description indicates the correct answer, the option no. mentioned is incorrect. Nice and Comprehensive. Thankyou

R
Rian
3/19/2026 9:12:10 AM

This is very good and accurate. Explanation is very helpful even thou some are not 100% right but good enough to pass.

G
Gerrard
3/18/2026 6:58:37 AM

The DP-900 exam can be tricky if you aren't familiar with Microsoft’s specific cloud terminology. I used the practice questions from free-braindumps.com and found them incredibly helpful. The site breaks down core data concepts and Azure services in a way that actually mirrors the real test. As a resutl I passed my exam.

V
Vineet Kumar
3/6/2026 5:26:16 AM

interesting

J
Joe
1/20/2026 8:25:24 AM

Passed this exam 2 days ago. These questions are in the exam. You are safe to use them.

N
NJ
12/24/2025 10:39:07 AM

Helpful to test your preparedness before giving exam

A
Ashwini
12/17/2025 8:24:45 AM

Really helped

J
Jagadesh
12/16/2025 9:57:10 AM

Good explanation

S
shobha
11/29/2025 2:19:59 AM

very helpful

P
Pandithurai
11/12/2025 12:16:21 PM

Question 1, Ans is - Developer,Standard,Professional Direct and Premier

E
Einstein
11/8/2025 4:13:37 AM

Passed this exam in first appointment. Great resource and valid exam dump.

D
David
10/31/2025 4:06:16 PM

Today I wrote this exam and passed, i totally relay on this practice exam. The questions were very tough, these questions are valid and I encounter the same.

T
Thor
10/21/2025 5:16:29 AM

Anyone used this dump recently?

V
Vladimir
9/25/2025 9:11:14 AM

173 question is A not D

K
khaos
9/21/2025 7:07:26 AM

nice questions

K
Katiso Lehasa
9/15/2025 11:21:52 PM

Thanks for the practice questions they helped me a lot.

E
Einstein
9/2/2025 7:42:00 PM

Passed this exam today. All questions are valid and this is not something you can find in ChatGPT.

V
vito
8/22/2025 4:16:51 AM

i need to pass exam for VMware 2V0-11.25

M
Matt
7/31/2025 11:44:40 PM

Great questions.

O
OLERATO
7/1/2025 5:44:14 AM

great dumps to practice for the exam

A
Adekunle willaims
6/9/2025 7:37:29 AM

How reliable and relevant are these questions?? also i can see the last update here was January and definitely new questions would have emerged.

A
Alex
5/24/2025 12:54:15 AM

Can I trust to this source?

S
SPriyak
3/17/2025 11:08:37 AM

can you please provide the CBDA latest test preparation

C
Chandra
11/28/2024 7:17:38 AM

This is the best and only way of passing this exam as it is extremely hard. Good questions and valid dump.

S
Sunak
1/25/2025 9:17:57 AM

Can I use this dumps when I am taking the exam? I mean does somebody look what tabs or windows I have opened ?

F
Frank
2/15/2024 11:36:57 AM

Finally got a change to write this exam and pass it! Valid and accurate!

A
Anonymous User
2/2/2024 6:42:12 PM

Upload this exam please!

N
Nicholas
2/2/2024 6:17:08 PM

Thank you for providing these questions. It helped me a lot with passing my exam.

AI Tutor 👋 I’m here to help!