NABP North American Pharmacist Licensure Examination NAPLEX Exam Questions in PDF

Free NABP NAPLEX Dumps Questions (page: 3)

Which of the following illnesses is an example of a type III hypersensitivity reaction?

  1. Lupus
  2. Graves disease
  3. Hashiomoto’s thyroiditis
  4. Allergic rhinitis
  5. Myasthenia gravis

Answer(s): A

Explanation:

A type III hypersensitivity reaction is mediated by immune complex deposition. In lupus, auto- antibodies are formed and these complexes are deposited in other tissues, especially in the kidneys, skin, and joints. Graves disease and myasthenia gravis are examples of type II but in some classification systems they are called type V reactions. The auto-antibodies created in Graves attack TSH receptors in the thyroid, whereas in Myasthenia the target is the acetylcholine receptor. Hashimoto’s thyroiditis is usually considered an example of a combination of type II and IV reactions, as T cells are directed at thyroid antigens and antibodies are also produced. Allergic rhinitis is a classic example of a type I, IgE mediated reaction.



Which of the following is a side effect of valproic acid?

  1. Gingival hyperplasia
  2. Pancreatitis
  3. Kidney stones
  4. Weight loss
  5. Euphoria

Answer(s): B

Explanation:

Pancreatitis is one of the most serious adverse effects that can be caused by valproic acid. Gingival hyperplasia is a side effect of Phenytoin. Kidney stones and weight loss can be a side effect of zonisamide or topiramate.



A 55-year-old female is receiving chemotherapy for metastatic carcinoma. She threatens to stop her treatment because of severe nausea and vomiting. The oncologist plans to use prochlorperazine to reduce the nausea and vomiting associated with chemotherapeutic agents. What is the mechanism of action of prochlorperazine?

  1. Serotonin 5-HT3 antagonist
  2. Blocking dopamine receptors
  3. Cannabinoids related
  4. Blockage of prostaglandins
  5. H2 receptor antagonist

Answer(s): B

Explanation:

B: A variety of drugs have been found to be of some value in the prevention and treatment of vomiting, especially cancer chemotherapy-induced vomiting. With the exception of thioridazine, most of the neuroleptic drugs have antiemetic effects that are mediated by blocking D2 dopaminergic receptors of the chemoreceptor trigger zone of the medulla. Phenothiazines, such as prochlorperazine, were the first drugs shown to be effective antiemetic agents and act by blocking dopamine receptors. They are effective against low to moderately emetogenic chemotherapeutic agents (for example, fluorouracil and doxorubicin). Although increasing the dose improves antiemetic activity, side effects, including hypotension and restlessness, are dose limiting. Other adverse reactions include extrapyramidal symptom and sedation. A: Serotonin 5-HT3 antagonist is incorrect. The specific antagonists of the 5-HT3 receptor, ondansetron and granisetron, selectively block 5-HT3 receptors in the periphery and in the brain (chemoreceptor trigger zone). C: Cannabinoids related is incorrect. Cannabinoids are marijuana derivatives including dronabinol and nabilone and are effective against moderately emetogenic chemotherapy. However, they are seldom first-line antiemetics because of serious side effects. D: Blockage of prostaglandins is incorrect. Dexamethasone and methylprednisolone used alone are effective against mildly to moderately emetogenic chemotherapy. Their antiemetic mechanism is not known, but it may involve blockade of prostaglandins. E: H2 receptor antagonist is incorrect. Antagonists of histamine H2 receptor block the action of histamine at all H2 receptors; their chief clinical use is as inhibitors of gastric acid secretion.



A 27-year-old female with ovarian cancer is undergoing chemotherapy. She develops subsequent renal failure.
Which of the following drugs is most likely responsible for this?

  1. Cyclophosphamide
  2. Bleomycin
  3. Cisplatin
  4. Vinblastine
  5. Vincristine

Answer(s): C

Explanation:

Cisplatin. All chemotherapeutics have similar generalized side effects related to their effects on rapidly growing cells. These include hair loss, nausea, and fatigue. However, many chemotherapeutics have unique toxicities as well which are often tested. Cisplatin (C) is notable for its nephrotoxicity and ototoxicity. Cyclophosphamide (A) is known to cause hemorrhagic cystitis. This is a distinct process from nephrotoxicity. The most noteworthy side effect of bleomycin (B) is pulmonary toxicity that can lead to pulmonary fibrosis. Vinblastine (D) is known for bone marrow suppression. Vincristine (E) causes neuropathy.



Your patient is a 43-year-old male who is experiencing post-operative voiding difficulty after an elective inguinal hernia repair. His post void residual volume was 280 cc.
Which of the following medications is the most appropriate choice of therapy for this patient?

  1. Bethanechol
  2. Oxybutynin
  3. Phenylephrine
  4. Finasteride
  5. Imipramine

Answer(s): A

Explanation:

The patient is experiencing a common complication of low abdominal surgery. Post-operative urinary retention occurs in almost 25% of patients after low abdominal surgical procedures. A normal post- void residual volume is less than 50 cc or urine. The effects of anesthesia and analgesia both contribute to bladder distension, decreased micturition reflex, reduction of contractility of the detrusor muscle of the bladder, and incomplete voiding. The detrusor muscle of the bladder is stimulated to contract by muscarinic cholinergic agonists. Bethanechol is a muscarinic agonist and is frequently used in this setting to improve bladder emptying. Finasteride is a drug that is a 5 alpha reductase inhibitor indicated for use in patients with bladder outlet obstruction as a result of prostatic hypertrophy. The inhibition of 5 alpha reductase decreases local conversion of testosterone to dihydrotestosterone in the prostate gland, which results in gradual shrinkage over a period of six to twelve months. Phenylephrine is an alpha-adrenergic agonist that is selective for alpha-1 receptors. Activation of the alpha 1 receptors in the bladder results in contraction of the trigone muscle and sphincter. This promotes urinary retention. Oxybutynin is an antimuscarinic agent that is useful for treatment of urge incontinence, and would have a detrimental effect on this patient’s bladder disorder. Imipramine is a medication with anticholinergic properties that would also cause worsening of the patient’s condition. Take home message: Post-operative urinary retention with concomitant incomplete voiding is a complication that results from a decreased micturition reflex, increased vesical sphincter tone, or decreased contractility of the detrusor muscle of the bladder. It can be successfully treated with a muscarinic agonist, such as bethanechol, or with an alpha-1 adrenergic antagonist.



Share your comments for NABP NAPLEX exam with other users:

A
AI Tutor Explanation
5/13/2026 11:00:29 PM

Question 2:
I don’t have the text for Question 2 here. Please paste the exact Question 2 (including all answer choices) or describe the topic it covers.
Once I have it, I’ll:

  • Identify the exam objective it targets.
  • Break down the stem and each option.
  • Use elimination and key concepts to justify why options are correct or incorrect.
  • Give the final answer with a concise explanation of the reasoning.

If there’s an image in Question 2, describe it or transcribe any text shown.

A
AI Tutor Explanation
5/10/2026 12:51:57 AM

Which statement is true about using default environment variables? The environment variables can be read in workflows using the ENV: variable_name syntax. The environment variables created should be prefixed with GITHUB_ to ensure they can be accessed in workflows The environment variables can be set in the defaults: sections of the workflow The GITHUB_WORKSPACE environment variable should be used to access files from within the runner.
Correct answer: The statement "The GITHUB_WORKSPACE environment variable should be used to access files from within the runner." is true.
Why the others are false:

  • ENV: variable_name syntax is not how you read env vars in workflows. Use ${{ env.VARIABLE }} in expressions or $VARIABLE in a shell.
  • Environment variables don’t need a GITHUB_ prefix. Custom vars can have any name; GITHUB_ is only for built-in, predefined vars.
  • defaults: cannot set environment variables. It configures defaults for run steps (like shell or working-directory), not env vars.

Extra tip:
  • GITHUB_WORKSPACE (or ${{ github.workspace }}) is the root path on the runner where the repository is checked out. Use it to access files, e.g., $GITHUB_WORKSPACE/... or ${{ github.workspace }}/....

A
AI Tutor Explanation
5/7/2026 11:34:48 PM

As an administrator for this subscription, you have been tasked with recommending a solution that prohibits users from copying corporate information from managed applications installed on unmanaged devices. Which of the following should you recommend? Windows Virtual Desktop. Microsoft Intune. Windows AutoPilot. Azure AD Application Proxy.

  • Microsoft Intune

Reason: Intune can enforce app protection policies (MAM) on managed apps, even on unmanaged devices, to prevent data leakage (e.g., restricting copy/paste, saving to non-approved apps, etc.). The other options don’t address data protection within apps on unmanaged devices.

A
AI Tutor Explanation
5/4/2026 2:43:10 AM

Question 34:

  • Question 34 asks: Which role(s) has the capability to create Policies? Choose two.
  • Likely correct roles: Compliance Manager and Compliance admin (A and B). These roles typically have policy governance rights to create and manage policies.
  • Why not the others: Compliance User is usually a limited user, not allowed to create policies. Risk Manager focuses on risks, not policy creation in standard setups.
  • Note on the provided key: The answer shown is “C” (Compliance User), which conflicts with “Choose two.” This is probably a key error. In practice, verify against your instance’s ACLs or official docs.
  • Quick check tip: In ServiceNow, review the ACLs and role permissions for the Policy records to see which roles can create policies.

A
AI Tutor Explanation
4/29/2026 11:59:58 PM

function of appnav in sdwan

  • AppNav (Application Navigation) is the Cisco SD-WAN feature that provides application-level visibility and control.
  • It maintains a catalog of applications (AppIDs) with attributes (ports/protocols, categories) and classifies traffic accordingly.
  • It allows policy authors to reference apps by name in policies, enabling application-aware routing, QoS, and service chaining based on the app’s requirements.
  • The SD-WAN fabric uses AppNav data to steer traffic along the best path, improving user experience for critical apps while optimizing WAN usage.

A
AI Tutor Explanation
4/29/2026 5:25:25 AM

Question 1:

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct

A
AI Tutor Explanation
4/29/2026 5:23:14 AM

Question 5:

  • Correct answer: A. User4 and User1 only

  • Why this is correct:
- The Automatic Enrollment setting in Intune has MDM user scope: GroupA. Only users in GroupA can enroll devices via MDM auto-enrollment. - Device6 will be enrolled via Windows Autopilot and Intune, so enrollment is allowed only for users in GroupA. - Based on the group memberships in the scenario, User4 and User1 are in GroupA, while User2 and User3 are not. Therefore only User4 and User1 can enroll Device6.
  • Quick tip for the exam:
- Remember: MDM user scope determines who can auto-enroll devices; MAM scope controls app protection enrollment. When a new Autopilot device is enrolled, the signing-in user must be in the MDM scope.

A
AI Tutor Explanation
4/29/2026 5:17:10 AM

Why this is correct

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct:
- Windows Autopilot requires devices to be registered by their hardware IDs (hash) before Autopilot can deploy Windows 10 Enterprise. - Collect the hardware IDs from the new Phoenix machines, save them in a CSV, and upload that CSV in the Intune/Windows Autopilot area. This maps each device to an Autopilot deployment profile. - After registration, you can assign Autopilot profiles (Windows 10 Enterprise, etc.). Other options (serial number CSV, generalizing, or Mobility settings) are not the initial Autopilot registration steps.

A
AI Tutor Explanation
4/25/2026 1:53:46 PM

Question 7:

  • Correct answer: B — A risk score is computed based on the number of remediations needed compared to the industry peer average.

Explanation:
  • Risk360 uses a remediation-based score. It benchmarks how many actions are required to fix issues against peers, giving a relative risk posture.
  • Why not the others:
- A: Not just total risk events by location. - C: Time to mitigate isn’t the primary scoring method. - D: Not a four-stage breach scoring approach.
Note: The page text shows a mismatch (it lists D as the answer), but the study guide describes the remediation-based scoring (B) as the correct concept.

A
AI Tutor Explanation
4/25/2026 1:42:20 PM

Question 104:

  • Correct answer: D) Multi-Terabyte (TB) Range

  • Brief explanation:
- clustering keys organize data into micro-partitions to improve pruning when queries filter on those columns. - The performance benefit is most significant for very large tables; for small tables the overhead of maintaining clustering outweighs gains. - Therefore, as a best practice, define clustering keys on tables at the TB scale.

C
Community Helper
4/25/2026 2:03:10 AM

Q23: Fabric Admin is correct. Because Domain admin cannot create domains. Only Fabric Admin can among the given options. Q51: Wrapping @pipeline.parameter.param1 inside {} will return a string. But question requires the expression to return Int, so correct answer should be @pipeline.parameter.param1 (no {})

A
AI Tutor Explanation
4/23/2026 3:07:03 PM

Question 62:

  • Correct answer: D (per the page)

  • Note: The explanation text on the page describes option B (use ZDX score and Analyze Score to trigger the Y Engine analysis), indicating a mismatch between the stated answer and the rationale.

  • Key concept: For fast root-cause analysis, leverage telemetry and auto-correlated insights:
- Use the user’s ZDX score for AWS and run Analyze Score to activate the Y Engine, which correlates metrics across network, client, and application to pinpoint the issue quickly.
  • Why the other options are less effective:
- A: Only checks for outages; doesn’t provide actionable root-cause analysis. - C: Deep Trace helps visibility but is manual and time-consuming. - D: Packet capture is invasive and slow; not the quickest path to root cause.

A
AI Tutor Explanation
4/23/2026 12:26:21 PM

Question 32:

  • Answer: A (2.4GHz)

  • Why: Lower-frequency signals have longer wavelengths and experience less attenuation when passing through walls and obstacles. Higher frequencies (5GHz, 6GHz) are more easily blocked by walls. NFC operates over very short distances and is not meant to penetrate walls. So 2.4 GHz best penetrates physical objects like walls.

A
AI Tutor Explanation
4/21/2026 8:48:36 AM

Question 3:

  • False is the correct answer (Option B).

Why:
  • In Snowflake, a database is a metadata object that exists within a single Snowflake account. Accounts are isolated—there isn’t one database that lives in multiple accounts.
  • You can access data across accounts via data sharing or database replication, but these create separate database objects in the other accounts (e.g., a database in the consumer account created from a share), not a single shared database across accounts.

So a single database cannot exist in more than one Snowflake account.

A
Anonymous User
4/16/2026 10:54:18 AM

Question 1:

  • Correct answer: Edate = sys.argv[1]
  • Why this is correct:
- When a Databricks Job passes parameters to a notebook, those parameters are supplied to the notebook's Python process as command-line arguments. The first argument after the script name is sys.argv[1], so date = sys.argv[1] captures the passed date value directly.
  • How it compares to other options:
- date = spark.conf.get("date") reads from Spark config, not from job parameters. - input() waits for user input at runtime, which isn’t how job parameters are provided. - date = dbutils.notebooks.getParam("date") would work if the notebook were invoked via dbutils.notebook.run with parameters, not

A
Anonymous User
4/15/2026 4:42:07 AM

Question 528:

  • Correct answer: NSG flow logs for NSG1 (Option B)

  • Why:
- Traffic Analytics uses NSG flow logs to analyze traffic patterns. You must have NSG flow logs enabled for the NSGs you want to monitor. - An Azure Log Analytics workspace is also required to store and query the traffic data. - Network Watcher must be available in the subscription for traffic analytics to function.
  • What to configure (brief steps):
- Ensure Network Watcher is enabled in the East US region (for the subscription/region). - Enable NSG flow logs on NSG1. - Ensure a Log Analytics workspace exists and is accessible (read/write) so Traffic Analytics can store and query logs.
  • Why other options aren’t correct:
- “Diagnostic settings for VM1” or “Diagnostic settings for NSG1” alone don’t guarantee flow logs are captured and sent to Log Analytics, which Traffic Analytics relies on. - “Insights for VM1” is not how Traffic Analytics collects traffic data.

A
Anonymous User
4/15/2026 2:43:53 AM

Question 23:
The correct answer is Domain admin (option B), not Fabric admin.

  • Domain admin provides domain-level management: create domains/subdomains and assign workspaces within those domains, which matches the tasks while following least privilege.
  • Fabric admin is global-level access and is more privileges than needed for this scenario (it would grant broader control across the Fabric environment).

A
Anonymous User
4/14/2026 12:31:34 PM

Question 2:
For question 2, the key concept is the Longest Prefix Match. Routers pick the route whose subnet mask is the most specific (largest prefix length) that still matches the destination IP.
From the options:

  • A) 10.10.10.0/28 ? 10.10.10.0–10.10.10.15
  • B) 10.10.13.0/25 ? 10.10.13.0–10.10.13.127
  • C) 10.10.13.144/28 ? 10.10.13.144–10.10.13.159
  • D) 10.10.13.208/29 ? 10.10.13.208–10.10.13.215

The destination Host A’s IP must fall within 10.10.13.208–10.10.13.215 for the /29 to be the best match. Since /29 is the longest prefix among the matching options, Router1 will use 10.10.13.208/29.
Thus, the correct answer is D.

S
srameh
4/14/2026 10:09:29 AM

Question 3:

  • Correct answer: Phase 4, Post Accreditation

  • Explanation:
- In DITSCAP, the four phases are: - Phase 1: Definition (concept and requirements) - Phase 2: Verification (design and testing) - Phase 3: Validation (fielding and evaluation) - Phase 4: Post Accreditation (ongoing operations and lifecycle management) - The description—continuing operation of an accredited IT system and addressing changing threats throughout its life cycle—fits the Post Accreditation phase, which covers operations, maintenance, monitoring, and reauthorization as threats and environment evolve.

O
onibokun10
4/13/2026 7:50:14 PM

Question 129:
Correct answer: CNAME

  • A CNAME record creates an alias for a domain, so newapplication.comptia.org will resolve to whatever IP address www.comptia.org resolves to. This ensures both names point to the same resource without duplicating the IP.
  • Why not the others:
- SOA defines authoritative information for a zone. - MX specifies mail exchange servers. - NS designates name servers for a zone.
  • Notes: The alias name (newapplication.comptia.org) should not have other records if you use a CNAME for it, and CNAMEs aren’t used for the zone apex (root) domain. This scenario uses a subdomain, so a CNAME is appropriate.

A
Anonymous User
4/13/2026 6:29:58 PM

Question 1:

  • Correct answer: C

  • Why this is best:
- Uses OS Login with IAM, so SSH access is granted via Google accounts rather than distributing per-user SSH keys. - Granting the compute.osAdminLogin role to a Google group gives admin access to all team members in a centralized, auditable way. - Access is auditable: Cloud Audit Logs show who accessed which VM, satisfying the security requirement to determine who accessed a given instance.
  • How it works:
- Enable OS Login on the project/instances (enable-oslogin metadata). - Add the team’s

A
Anonymous User
4/13/2026 1:00:51 PM

Question 2:

  • Answer: D. Azure Advisor

  • Why: To view security-related recommendations for resources in the Compute and Apps area (including App Service Web Apps and Functions), you use Azure Advisor. Advisor surfaces personalized best-practice recommendations across resources, including security, and shows which resources are affected and the severity.

  • Why not the others:
- Azure Log Analytics is for ad-hoc querying of telemetry, not for viewing security recommendations. - Azure Event Hubs is for streaming telemetry data, not for security recommendations.
  • Quick tip: In the portal, navigate to Azure Advisor and check the Security recommendations for App Services to see actionable items and affe

D
Don
4/11/2026 5:36:42 AM

Recommend using AI for Solutions rather the Answer(s) submitted here

M
Mogae Malapela
4/8/2026 6:37:56 AM

This is very interesting

A
Anon
4/6/2026 5:22:54 PM

Are these the same questions you have to pay for in ExamTopics?

L
LRK
3/22/2026 2:38:08 PM

For Question 7 - while the answer description indicates the correct answer, the option no. mentioned is incorrect. Nice and Comprehensive. Thankyou

R
Rian
3/19/2026 9:12:10 AM

This is very good and accurate. Explanation is very helpful even thou some are not 100% right but good enough to pass.

G
Gerrard
3/18/2026 6:58:37 AM

The DP-900 exam can be tricky if you aren't familiar with Microsoft’s specific cloud terminology. I used the practice questions from free-braindumps.com and found them incredibly helpful. The site breaks down core data concepts and Azure services in a way that actually mirrors the real test. As a resutl I passed my exam.

V
Vineet Kumar
3/6/2026 5:26:16 AM

interesting

J
Joe
1/20/2026 8:25:24 AM

Passed this exam 2 days ago. These questions are in the exam. You are safe to use them.

N
NJ
12/24/2025 10:39:07 AM

Helpful to test your preparedness before giving exam

A
Ashwini
12/17/2025 8:24:45 AM

Really helped

J
Jagadesh
12/16/2025 9:57:10 AM

Good explanation

S
shobha
11/29/2025 2:19:59 AM

very helpful

AI Tutor 👋 I’m here to help!