Amazon
Anthropic
Avaya
Cisco
CompTIA
CrowdStrike
EC-Council
EXIN
Fortinet
Google
ISC
ISC2
ITIL
Juniper
Microsoft
NVIDIA
Palo Alto Networks
Salesforce
SAP
VMware
All Vendors

Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert MB-335 Dumps in PDF

Free Microsoft MB-335 Real Questions (page: 16)

MB-335 PDF — 270 Questions

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Create a formula version for each concentration level.

Does the solution meet the goal?

  1. Yes
  2. No

Answer(s): B

Explanation:

Correct:
* Set up the batch attributes for a minimum value, a maximum value, and a target level for the filler ingredients.
Incorrect:
* Configure the catch weight of IngredientA to allow for the variances of the concentrations received from the different vendors.
* Create a constraint-based product master with variants. Use the trade agreements to specify the different pricing.
* Create a dimension-based product master with variants and use the trade agreements to specify the different pricing.
* Create a dimension-based product with configurations. Use a price model to calculate the different configurable option costs.
* Create a formula version for each concentration level.

* Set up the IngredientB formula line as a phantom BOM.
Note: Products that have an active ingredient
A product can be defined by its concentration of an active ingredient. The active ingredient of a product is modeled by using a product-specific batch attribute that has a minimum value, a maximum value, and a target level.
The target level of a batch attribute represents the estimated percentage of an active ingredient in a product.
The minimum and maximum values represent the accepted deviation from the target level. They can be used, for example, as an accepted tolerance for batches at product receipt.
On the product level, you must also specify how the level of the active ingredient for a batch of the product should be recorded: as part of the purchase receipt process or as part of a quality order process.
To associate a base attribute with a product, the following setup is required:
The product must be batch-controlled. To make a product batch-controlled, you must assign a tracking dimension group to the product that has an active Batch dimension.
The attribute that indicates the ingredient levels must be defined as a product-specific batch attribute for the product.
To look up and edit the actual value of the active ingredient for a batch:
1. Go to Inventory management > Inquiries and reports > Tracking dimensions > Batches.
2. Select a batch number from the grid.
3. On the Action Pane, open the View tab and then select Inventory batch attributes.


Reference:

https://learn.microsoft.com/en-us/dynamics365/supply-chain/production-control/batch-balancing https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration



Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Set up the IngredientB formula line as a phantom BOM.

Does the solution meet the goal?

  1. Yes
  2. No

Answer(s): B

Explanation:

Correct:
* Set up the batch attributes for a minimum value, a maximum value, and a target level for the filler ingredients.
Incorrect:
* Configure the catch weight of IngredientA to allow for the variances of the concentrations received from the different vendors.
* Create a constraint-based product master with variants. Use the trade agreements to specify the different pricing.
* Create a dimension-based product master with variants and use the trade agreements to specify the different pricing.
* Create a dimension-based product with configurations. Use a price model to calculate the different configurable option costs.
* Create a formula version for each concentration level.
* Set up the IngredientB formula line as a phantom BOM.
Note: Products that have an active ingredient
A product can be defined by its concentration of an active ingredient. The active ingredient of a product is modeled by using a product-specific batch attribute that has a minimum value, a maximum value, and a target level.
The target level of a batch attribute represents the estimated percentage of an active ingredient in a product.
The minimum and maximum values represent the accepted deviation from the target level. They can be used, for example, as an accepted tolerance for batches at product receipt.
On the product level, you must also specify how the level of the active ingredient for a batch of the product should be recorded: as part of the purchase receipt process or as part of a quality order process.
To associate a base attribute with a product, the following setup is required:
The product must be batch-controlled. To make a product batch-controlled, you must assign a tracking dimension group to the product that has an active Batch dimension.
The attribute that indicates the ingredient levels must be defined as a product-specific batch attribute for the product.
To look up and edit the actual value of the active ingredient for a batch:
1. Go to Inventory management > Inquiries and reports > Tracking dimensions > Batches.
2. Select a batch number from the grid.
3. On the Action Pane, open the View tab and then select Inventory batch attributes.


Reference:

https://learn.microsoft.com/en-us/dynamics365/supply-chain/production-control/batch-balancing https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration



Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Configure the catch weight of IngredientA to allow for the variances of the concentrations received from the different vendors.

Does the solution meet the goal?

  1. Yes
  2. No

Answer(s): B

Explanation:

Correct:
* Set up the batch attributes for a minimum value, a maximum value, and a target level for the filler ingredients.
Incorrect:
* Configure the catch weight of IngredientA to allow for the variances of the concentrations received from the different vendors.
* Create a constraint-based product master with variants. Use the trade agreements to specify the different pricing.
* Create a dimension-based product master with variants and use the trade agreements to specify the different pricing.
* Create a dimension-based product with configurations. Use a price model to calculate the different configurable option costs.
* Create a formula version for each concentration level.
* Set up the IngredientB formula line as a phantom BOM.
Note: Products that have an active ingredient
A product can be defined by its concentration of an active ingredient. The active ingredient of a product is modeled by using a product-specific batch attribute that has a minimum value, a maximum value, and a target level.
The target level of a batch attribute represents the estimated percentage of an active ingredient in a product.
The minimum and maximum values represent the accepted deviation from the target level. They can be used, for example, as an accepted tolerance for batches at product receipt.
On the product level, you must also specify how the level of the active ingredient for a batch of the product should be recorded: as part of the purchase receipt process or as part of a quality order process.
To associate a base attribute with a product, the following setup is required:
The product must be batch-controlled. To make a product batch-controlled, you must assign a tracking dimension group to the product that has an active Batch dimension.
The attribute that indicates the ingredient levels must be defined as a product-specific batch attribute for the product.
To look up and edit the actual value of the active ingredient for a batch:
1. Go to Inventory management > Inquiries and reports > Tracking dimensions > Batches.
2. Select a batch number from the grid.
3. On the Action Pane, open the View tab and then select Inventory batch attributes.


Reference:

https://learn.microsoft.com/en-us/dynamics365/supply-chain/production-control/batch-balancing https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration



HOTSPOT

A company manufactures high-end speaker systems. You have different configurations available for customers to customize features, including finishes and speaker materials. You have a product configuration model with bill of material lines and conditions for each component.

A customer can optionally add on protective covers, but only if a metal material is selected. If any other material is selected, the covers cannot be added. You add the following attributes:



You need to create an expression-based constraint that will only allow Corner Protection if Metal is selected.

How should you complete the expression? To answer, select the appropriate options in the answer area.

Hot Area:

  1. See Explanation section for answer.

Answer(s): A

Explanation:



DRAG DROP

A process manufacturing company is implementing Dynamics 365 Supply Chain Management. The company will use multiple process manufacturing functionalities including by-products.

You need to configure by-product formula allocation methods.

Which methods should you use? To answer, drag the appropriate by-product burden allocation methods to the correct scenarios. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Note: Each correct selection is worth one point

Select and Place:

  1. See Explanation section for answer.

Answer(s): A

Explanation:


Reference:

https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/methodology-total-cost- allocation



A company uses engineering change management for process manufacturing operations.

The company discovers that several products were configured with missing master data during the life cycle of the products.

You need to configure master data checks for the products.

Which three objects can you configure for data checks? Each correct answer presents a complete solution.

Note: Each correct selection is worth one point.

  1. standard, non-engineering products
  2. product formulas
  3. product BOM lines
  4. engineering products
  5. product versions

Answer(s): A,D,E

Explanation:

You can create readiness checks for new engineering products, variants, and versions. ou can also apply readiness checks to standard (non-engineering) products.


Reference:

https://learn.microsoft.com/en-us/dynamics365/supply-chain/engineering-change-management/product- readiness



A company produces various products using Process manufacturing.

The manufacturer makes two co-products from a formula and rarely produces the primary formula item. The costs of making the co-products are inflated. The manufacturer must update the costs of producing the co- products and change the formula to not produce the primary formula item.

You need to change the primary formula item type.

What should you do?

  1. Change the primary formula item to use the planning item type.
  2. Change the production type to Bill of materials and recalculate the item cost.
  3. Associate the costs to produce by-products with the items.
  4. Change the cost of the primary formula item to zero and then recalculate the item cost.

Answer(s): A



HOTSPOT

A customer produces light projection toys for holiday decorations throughout the year.

You must implement Bills of material (BOMs) for the product lifecycle. The solution must meet the following requirements:



You need to create a BOM for each phase.

Which BOM types should you use? To answer, select the appropriate configuration options in the answer area.

Note: Each correct selection is worth one point.

Hot Area:

  1. See Explanation section for answer.

Answer(s): A

Explanation:

Box 1: draft
Sketching/Draft BOM This BOM gives a draft estimation of required materials in an early design phase and helps you do a rough estimate of cost and estimated product attributes. This BOM isn't usually used in enterprise resource planning (ERP).

Box 2: engineering
Engineering BOM This BOM is typically used when you design products that are based on existing product portfolios. Engineering BOMs are structured to simplify the design process and group complex products into engineering modules. For simple products, it might be possible to engineering BOMs for the actual production process. However, for other products, the engineering BOM must be converted to an actual production BOM. Engineering BOMS are typically represented by phantoms in the BOM hierarchy. Although engineering BOMs can be used for the planning and execution of manufacturing operations, this approach can lead to inefficiencies, especially in repetitive operations where many orders are created.

Box 3: planning
Planning BOM This BOM is used to do planning for material requirements. The demand of components and ingredients is calculated based on the demand of the finished products. Like costing BOMs, planning BOMs might represent a specific mix of material that is used in a period.

Box 4: production
Production BOM This is the actual BOM that is used for a specific production. A production BOM must take into account the actual resources that are used to produce the product.
When a production order, batch order, or kanban is created, the multiple levels of BOMs that are represented by phantoms are collapsed into one level and distributed over the operations for the order.

Box 5: costing
Costing BOM This BOM is used to calculate the estimated cost of a product. For example, you can use a costing BOM when standard cost is used or the estimated planned cost of a given product is calculated. Costing BOMs can refer to a specific mix of materials and resources that is expected to be used. Therefore, you can use the costing BOM to create a representative estimated cost for a period and help avoid variances over time.


Reference:

https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/bill-of-material-bom



PDF
Viewing page 16 of 35

Share your comments for Microsoft MB-335 exam with other users:

A
AI Tutor Explanation
4/25/2026 1:53:46 PM

Question 7:

  • Correct answer: B — A risk score is computed based on the number of remediations needed compared to the industry peer average.

Explanation:
  • Risk360 uses a remediation-based score. It benchmarks how many actions are required to fix issues against peers, giving a relative risk posture.
  • Why not the others:
- A: Not just total risk events by location. - C: Time to mitigate isn’t the primary scoring method. - D: Not a four-stage breach scoring approach.
Note: The page text shows a mismatch (it lists D as the answer), but the study guide describes the remediation-based scoring (B) as the correct concept.

New Delhi, India
A
AI Tutor Explanation
4/25/2026 1:42:20 PM

Question 104:

  • Correct answer: D) Multi-Terabyte (TB) Range

  • Brief explanation:
- clustering keys organize data into micro-partitions to improve pruning when queries filter on those columns. - The performance benefit is most significant for very large tables; for small tables the overhead of maintaining clustering outweighs gains. - Therefore, as a best practice, define clustering keys on tables at the TB scale.

Thane, India
C
Community Helper
4/25/2026 2:03:10 AM

Q23: Fabric Admin is correct. Because Domain admin cannot create domains. Only Fabric Admin can among the given options. Q51: Wrapping @pipeline.parameter.param1 inside {} will return a string. But question requires the expression to return Int, so correct answer should be @pipeline.parameter.param1 (no {})

New Delhi, India
A
AI Tutor Explanation
4/23/2026 3:07:03 PM

Question 62:

  • Correct answer: D (per the page)

  • Note: The explanation text on the page describes option B (use ZDX score and Analyze Score to trigger the Y Engine analysis), indicating a mismatch between the stated answer and the rationale.

  • Key concept: For fast root-cause analysis, leverage telemetry and auto-correlated insights:
- Use the user’s ZDX score for AWS and run Analyze Score to activate the Y Engine, which correlates metrics across network, client, and application to pinpoint the issue quickly.
  • Why the other options are less effective:
- A: Only checks for outages; doesn’t provide actionable root-cause analysis. - C: Deep Trace helps visibility but is manual and time-consuming. - D: Packet capture is invasive and slow; not the quickest path to root cause.

Coimbatore, India
A
AI Tutor Explanation
4/23/2026 12:26:21 PM

Question 32:

  • Answer: A (2.4GHz)

  • Why: Lower-frequency signals have longer wavelengths and experience less attenuation when passing through walls and obstacles. Higher frequencies (5GHz, 6GHz) are more easily blocked by walls. NFC operates over very short distances and is not meant to penetrate walls. So 2.4 GHz best penetrates physical objects like walls.

Allen, United States
A
AI Tutor Explanation
4/21/2026 8:48:36 AM

Question 3:

  • False is the correct answer (Option B).

Why:
  • In Snowflake, a database is a metadata object that exists within a single Snowflake account. Accounts are isolated—there isn’t one database that lives in multiple accounts.
  • You can access data across accounts via data sharing or database replication, but these create separate database objects in the other accounts (e.g., a database in the consumer account created from a share), not a single shared database across accounts.

So a single database cannot exist in more than one Snowflake account.

Thane, India
A
Anonymous User
4/16/2026 10:54:18 AM

Question 1:

  • Correct answer: E — date = sys.argv[1]
  • Why this is correct:
- When a Databricks Job passes parameters to a notebook, those parameters are supplied to the notebook's Python process as command-line arguments. The first argument after the script name is sys.argv[1], so date = sys.argv[1] captures the passed date value directly.
  • How it compares to other options:
- date = spark.conf.get("date") reads from Spark config, not from job parameters. - input() waits for user input at runtime, which isn’t how job parameters are provided. - date = dbutils.notebooks.getParam("date") would work if the notebook were invoked via dbutils.notebook.run with parameters, not

Innisfil, Canada
A
Anonymous User
4/15/2026 4:42:07 AM

Question 528:

  • Correct answer: NSG flow logs for NSG1 (Option B)

  • Why:
- Traffic Analytics uses NSG flow logs to analyze traffic patterns. You must have NSG flow logs enabled for the NSGs you want to monitor. - An Azure Log Analytics workspace is also required to store and query the traffic data. - Network Watcher must be available in the subscription for traffic analytics to function.
  • What to configure (brief steps):
- Ensure Network Watcher is enabled in the East US region (for the subscription/region). - Enable NSG flow logs on NSG1. - Ensure a Log Analytics workspace exists and is accessible (read/write) so Traffic Analytics can store and query logs.
  • Why other options aren’t correct:
- “Diagnostic settings for VM1” or “Diagnostic settings for NSG1” alone don’t guarantee flow logs are captured and sent to Log Analytics, which Traffic Analytics relies on. - “Insights for VM1” is not how Traffic Analytics collects traffic data.

Hamburg, Germany
A
Anonymous User
4/15/2026 2:43:53 AM

Question 23:
The correct answer is Domain admin (option B), not Fabric admin.

  • Domain admin provides domain-level management: create domains/subdomains and assign workspaces within those domains, which matches the tasks while following least privilege.
  • Fabric admin is global-level access and is more privileges than needed for this scenario (it would grant broader control across the Fabric environment).

Kottayam, India
A
Anonymous User
4/14/2026 12:31:34 PM

Question 2:
For question 2, the key concept is the Longest Prefix Match. Routers pick the route whose subnet mask is the most specific (largest prefix length) that still matches the destination IP.
From the options:

  • A) 10.10.10.0/28 ? 10.10.10.0–10.10.10.15
  • B) 10.10.13.0/25 ? 10.10.13.0–10.10.13.127
  • C) 10.10.13.144/28 ? 10.10.13.144–10.10.13.159
  • D) 10.10.13.208/29 ? 10.10.13.208–10.10.13.215

The destination Host A’s IP must fall within 10.10.13.208–10.10.13.215 for the /29 to be the best match. Since /29 is the longest prefix among the matching options, Router1 will use 10.10.13.208/29.
Thus, the correct answer is D.

Canada
S
srameh
4/14/2026 10:09:29 AM

Question 3:

  • Correct answer: Phase 4, Post Accreditation

  • Explanation:
- In DITSCAP, the four phases are: - Phase 1: Definition (concept and requirements) - Phase 2: Verification (design and testing) - Phase 3: Validation (fielding and evaluation) - Phase 4: Post Accreditation (ongoing operations and lifecycle management) - The description—continuing operation of an accredited IT system and addressing changing threats throughout its life cycle—fits the Post Accreditation phase, which covers operations, maintenance, monitoring, and reauthorization as threats and environment evolve.

France
O
onibokun10
4/13/2026 7:50:14 PM

Question 129:
Correct answer: CNAME

  • A CNAME record creates an alias for a domain, so newapplication.comptia.org will resolve to whatever IP address www.comptia.org resolves to. This ensures both names point to the same resource without duplicating the IP.
  • Why not the others:
- SOA defines authoritative information for a zone. - MX specifies mail exchange servers. - NS designates name servers for a zone.
  • Notes: The alias name (newapplication.comptia.org) should not have other records if you use a CNAME for it, and CNAMEs aren’t used for the zone apex (root) domain. This scenario uses a subdomain, so a CNAME is appropriate.

Swindon, United Kingdom
A
Anonymous User
4/13/2026 6:29:58 PM

Question 1:

  • Correct answer: C

  • Why this is best:
- Uses OS Login with IAM, so SSH access is granted via Google accounts rather than distributing per-user SSH keys. - Granting the compute.osAdminLogin role to a Google group gives admin access to all team members in a centralized, auditable way. - Access is auditable: Cloud Audit Logs show who accessed which VM, satisfying the security requirement to determine who accessed a given instance.
  • How it works:
- Enable OS Login on the project/instances (enable-oslogin metadata). - Add the team’s

Germany
A
Anonymous User
4/13/2026 1:00:51 PM

Question 2:

  • Answer: D. Azure Advisor

  • Why: To view security-related recommendations for resources in the Compute and Apps area (including App Service Web Apps and Functions), you use Azure Advisor. Advisor surfaces personalized best-practice recommendations across resources, including security, and shows which resources are affected and the severity.

  • Why not the others:
- Azure Log Analytics is for ad-hoc querying of telemetry, not for viewing security recommendations. - Azure Event Hubs is for streaming telemetry data, not for security recommendations.
  • Quick tip: In the portal, navigate to Azure Advisor and check the Security recommendations for App Services to see actionable items and affe

    Brazil
D
Don
4/11/2026 5:36:42 AM

Recommend using AI for Solutions rather the Answer(s) submitted here

Hamburg, Germany
M
Mogae Malapela
4/8/2026 6:37:56 AM

This is very interesting

Gaborone, Botswana
A
Anon
4/6/2026 5:22:54 PM

Are these the same questions you have to pay for in ExamTopics?

Amsterdam, The Netherlands
L
LRK
3/22/2026 2:38:08 PM

For Question 7 - while the answer description indicates the correct answer, the option no. mentioned is incorrect. Nice and Comprehensive. Thankyou

Paris, France
R
Rian
3/19/2026 9:12:10 AM

This is very good and accurate. Explanation is very helpful even thou some are not 100% right but good enough to pass.

United States
G
Gerrard
3/18/2026 6:58:37 AM

The DP-900 exam can be tricky if you aren't familiar with Microsoft’s specific cloud terminology. I used the practice questions from free-braindumps.com and found them incredibly helpful. The site breaks down core data concepts and Azure services in a way that actually mirrors the real test. As a resutl I passed my exam.

United States
V
Vineet Kumar
3/6/2026 5:26:16 AM

interesting

Anonymous
J
Joe
1/20/2026 8:25:24 AM

Passed this exam 2 days ago. These questions are in the exam. You are safe to use them.

UNITED STATES
N
NJ
12/24/2025 10:39:07 AM

Helpful to test your preparedness before giving exam

Anonymous
A
Ashwini
12/17/2025 8:24:45 AM

Really helped

Anonymous
J
Jagadesh
12/16/2025 9:57:10 AM

Good explanation

INDIA
S
shobha
11/29/2025 2:19:59 AM

very helpful

INDIA
P
Pandithurai
11/12/2025 12:16:21 PM

Question 1, Ans is - Developer,Standard,Professional Direct and Premier

Anonymous
E
Einstein
11/8/2025 4:13:37 AM

Passed this exam in first appointment. Great resource and valid exam dump.

Anonymous
D
David
10/31/2025 4:06:16 PM

Today I wrote this exam and passed, i totally relay on this practice exam. The questions were very tough, these questions are valid and I encounter the same.

UNITED STATES
T
Thor
10/21/2025 5:16:29 AM

Anyone used this dump recently?

NEW ZEALAND
V
Vladimir
9/25/2025 9:11:14 AM

173 question is A not D

Anonymous
K
khaos
9/21/2025 7:07:26 AM

nice questions

Anonymous
K
Katiso Lehasa
9/15/2025 11:21:52 PM

Thanks for the practice questions they helped me a lot.

Anonymous
E
Einstein
9/2/2025 7:42:00 PM

Passed this exam today. All questions are valid and this is not something you can find in ChatGPT.

UNITED KINGDOM
AI Tutor 👋 I’m here to help!