Which statement is correct about the VXLAN data plane?
Answer(s): C
VXLAN (Virtual Extensible LAN) uses an overlay encapsulation method to carry Layer-2 frames over an IP underlay. This functionality is part of the data plane, which is responsible for packet forwarding and encapsulation/decapsulation."In an EVPN-VXLAN fabric, the control plane (via BGP EVPN) learns and advertises MAC and IP information, while the data plane encapsulates and forwards traffic using VXLAN tunnels between VTEPs."Option A is incorrect: IP learning happens in the control plane, not the data plane.Option B is incorrect: MAC advertisement is done in the control plane through EVPN route types.Option D is incorrect: MAC learning is handled by EVPN control plane, not the VXLAN data plane.Option C is correct: the VXLAN data plane encapsulates the traffic in UDP tunnels between VTEPs.
Juniper Mist AI for Wired EVPN-VXLAN OverviewJuniper Validated Design EVPN-VXLAN Control and Data Plane SeparationJunos OS EVPN-VXLAN Deployment Guide
What are two unique advantages about configuration automation in Wired Assurance? (Choose two.)
Answer(s): A,C
Wired Assurance in Mist Cloud provides automated configuration for Juniper EX Series switches. The automation is built on open APIs and supports programmable workflows, which allow seamless integration with external systems and reduce manual configuration errors."Wired Assurance leverages 100% open APIs, enabling integration with third-party automation and orchestration tools. Combined with programmable workflows, this provides a consistent and scalable automation framework for switch deployment and management."Option A (100% open APIs): Correct -- APIs enable automation and external integration.Option C (programmable workflows): Correct -- workflows automate repetitive tasks and provisioning.Option B (client SLEs): Incorrect -- this is part of user experience monitoring, not automation.Option D (switch insights): Incorrect -- this relates to telemetry and visibility, not automation.
Juniper Mist AI for Wired Wired Assurance OverviewJuniper Mist AI for Wired Switch Automation and APIs GuideJuniper Validated Design Mist Wired Automation Best Practices
In Juniper Mist cloud services, service level expectation (SLE) telemetry is collected from every device and stored for up to how long?
Answer(s): A
Juniper Mist AI collects telemetry for Service Level Expectations (SLEs) across wired and wireless devices. This telemetry includes metrics such as time-to-connect, throughput, coverage, and switch performance."Service Level Expectation (SLE) data is collected from every device and stored for up to one month in the Mist Cloud. This allows administrators to analyze historical performance trends and troubleshoot issues based on real-time and historical data." Option B (2 months): Incorrect -- data is not retained this long. Option C (7 days): Incorrect -- telemetry retention is longer. Option D (24 hours): Incorrect -- too short for Mist SLE analytics. Option A (1 month): Correct -- Mist Cloud retains SLE telemetry for 30 days (1 month).
Juniper Mist AI for Wired Service Level Expectations Overview Juniper Mist AI for Wired Telemetry and Data Retention Guide ===========
Which campus fabric architecture supports Layer 3 gateways at the distribution layer?
In Juniper's campus fabric architectures, the location of the Layer 3 gateway (IRB) differentiates between CRB and ERB models:Centrally-Routed Bridging (CRB): L3 gateways are placed at the core layer. Edge-Routed Bridging (ERB): L3 gateways are placed at the distribution layer, closer to the edge. "In the ERB model, Layer 2 gateways are deployed at the access layer, and Layer 3 gateways are deployed at the distribution layer."Option A (CRB): Incorrect -- L3 is at the core, not distribution. Option B (IP Clos): Incorrect -- in 3-stage Clos, L3 is pushed to the access layer. Option D (EVPN multihoming): Incorrect -- this is about redundancy, not gateway placement. Option C (ERB): Correct -- L3 gateways sit at the distribution layer in the ERB architecture.
Juniper Mist AI for Wired Campus Fabric Architecture ModelsJuniper Validated Design Core/Distribution CRB vs ERB Gateways Junos OS EVPN-VXLAN Campus Fabric Deployment Guide
You have deployed your switches and need to provide a unique hostname on each switch. Which Mist dashboard option allows you to accomplish this task?
In Juniper Mist Cloud, there are multiple configuration scopes:Organization-level templates apply globally.Site-level configuration applies across all devices in a site. Individual switch configuration is used to define unique, device-specific attributes such as hostname, management IP, or local overrides."Templates and site-level configuration ensure consistency across devices, while individual switch configuration is used to assign unique values such as hostnames." Option A: Incorrect -- org templates define common config, not hostnames. Option B: Incorrect -- site configs are shared across all switches in the site. Option D: Incorrect -- device profiles apply settings like port policies or authentication, not hostnames.Option C: Correct -- individual switch configuration is the correct place to assign hostnames uniquely per device.
Juniper Mist AI for Wired Switch Configuration Hierarchy Juniper Mist Documentation Device-Level Configuration in Wired Assurance ===========
Which two statements are correct about the campus fabric core-distribution architecture? (Choose two.)
Answer(s): A,D
In a core-distribution campus fabric model, the EVPN-VXLAN overlay is established only between the core and distribution tiers. The access switches are not part of the EVPN fabric; they connect upstream to distribution but do not run VXLAN tunnels. "In the core-distribution campus fabric, only the core and distribution layers participate in the EVPN- VXLAN topology. The access layer connects to the distribution switches and forwards traffic but does not take part in the EVPN-VXLAN fabric."Option A: Correct -- EVPN-VXLAN is built between core and distribution tiers. Option B: Incorrect -- both core and distribution participate, not just core. Option C: Incorrect -- access switches are excluded from EVPN-VXLAN participation.Option D: Correct -- the access layer does not participate in EVPN-VXLAN.
Juniper Mist AI for Wired Campus Fabric Core-Distribution Architecture Juniper Validated Design EVPN-VXLAN Campus Deployment Models Junos OS EVPN Campus Fabric Design Guide
What information does Mist use to determine if the port is classified as an uplink? (Choose two.)
Juniper Mist automatically classifies ports to simplify visibility and automation within Wired Assurance. The Mist cloud analyzes port telemetry and link behavior to determine port roles, including uplinks."Mist uses machine learning and switch telemetry to automatically detect uplinks by analyzing traffic behavior and topology information. Uplink ports typically exhibit higher TX/RX utilization and are identified as spanning-tree root or forwarding ports connecting upstream devices." Option A: Correct -- Mist examines traffic statistics. Ports with significantly higher TX/RX utilization relative to others are likely uplinks.Option B: Incorrect -- MTU size is not a classification criterion. Option C: Correct -- Mist uses STP information (root or designated port status) to identify uplinks. Option D: Incorrect -- port description fields are for administrative purposes only and are not used by Mist analytics.
Juniper Mist AI for Wired Port Role Classification and Telemetry Juniper Mist AI for Wired Automated Uplink Detection and Insights Juniper Wired Assurance Analytics Guide
Which two statements are correct about the EVPN-VXLAN control plane? (Choose two.)
Answer(s): B,C
In an EVPN-VXLAN fabric, the control plane operates over BGP EVPN and is responsible for distributing endpoint reachability information (MAC and IP) among VTEPs. The data plane, by contrast, performs encapsulation and forwarding."The EVPN control plane uses BGP to exchange MAC and IP address reachability information between VTEPs, enabling efficient forwarding and loop prevention without relying on flood-and- learn behavior."Option A: Incorrect -- encapsulation occurs in the data plane, not the control plane. Option B: Correct -- the control plane distributes MAC-to-VTEP mappings. Option C: Correct -- the control plane also distributes IP-to-MAC associations (Type 2 and Type 5 EVPN routes).Option D: Incorrect -- the control plane does not alter packet headers.
Juniper Mist AI for Wired EVPN-VXLAN OverviewJuniper Validated Design EVPN Control and Data Plane Operation Junos OS EVPN-VXLAN Implementation Guide
Share your comments for Juniper JN0-460 exam with other users:
i need it very much please share it in the fastest time.
correct answer is d for student.java program
q:37 c is correct
q6 exam topic: terramearth, c: correct answer: copy 1petabyte to encrypted usb device ???
explained answers
plan to take theaws certified developer - associate dva-c02 in the next few weeks
very helpfull
good questions
help to practice csa exam
nice tip and well documented
i need the exam
please upload
prepping for fsc exam
pd1 with great experience
@t it seems like azure service bus message quesues could be the best solution
helpful to check your understanding.
question 128 the answer should be static not auto
more comments here
great support to appear for exams
useful dumps
making progress
q31 answer should be d i think
is this real?
q10: c and f are also true. q11: this is outdated. you no longer need ownership on a pipe to operate it
good questions with simple explanation
admin guide (windows) respond to malicious causality chains. when the cortex xdr agent identifies a remote network connection that attempts to perform malicious activity—such as encrypting endpoint files—the agent can automatically block the ip address to close all existing communication and block new connections from this ip address to the endpoint. when cortex xdrblocks an ip address per endpoint, that address remains blocked throughout all agent profiles and policies, including any host-firewall policy rules. you can view the list of all blocked ip addresses per endpoint from the action center, as well as unblock them to re-enable communication as appropriate. this module is supported with cortex xdr agent 7.3.0 and later. select the action mode to take when the cortex xdr agent detects remote malicious causality chains: enabled (default)—terminate connection and block ip address of the remote connection. disabled—do not block remote ip addresses. to allow specific and known s
very inciting
question 5, it seems a instead of d, because: - care plan = case - patient = person account - product = product2;
it look like real one
i am taking oracle fcc certification test next two days, pls share question dumps
i need dumps
its time to comptia sec+
question 35 has an answer for a different question. i believe the answer is "a" because it shut off the firewall. "0" in registry data means that its false (aka off).
helpful content
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your JN0-460, please sign in or create a free account.