iSQI CTAL-TM-001 ISTQB Certified Tester Advanced Level Test Manager (CTAL-TM_001) CTAL-TM-001 Dumps in PDF

Free iSQI CTAL-TM-001 Real Questions (page: 7)


A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

As part of the improvement program, the organization is also looking at tool support. Which type of tool could be used to ensure higher quality of the code to be reviewed?

  1. Review tool
  2. Test execution tool
  3. Static analysis tool
  4. Test design tool

Answer(s): C




A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

What is the main reason why reviews are especially beneficial in the above-mentioned scenario?

  1. They ensure a common understanding of the product.
  2. They find defects early.
  3. They enhance project communication.
  4. They can be performed without exercising the code.

Answer(s): D




A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

The introduction of reviews and inspections has often failed as a process improvement action. Identify the THREE most important measures that should be taken to reduce the risk that this test process improvement will fail.

  1. Process ownership and experienced moderators who drive the inspection process.
  2. Management support
  3. Training of those involved
  4. The availability of stands and processes
  5. Usage of a more traditional software development lifecycle
  6. Alignment with software process improvement
  7. Using a reference model, e.g. TMMi

Answer(s): A,B,C




A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

IEEE 1028 also defines “management review” as a type of review. What is the main purpose of a management review?

  1. Align technical concepts during the design phase
  2. Establish a common understanding of requirements
  3. Provide independent evaluation of compliance to processes, regulations, standards etc.
  4. To monitor progress, assess the status of a project, and make decisions about future actions

Answer(s): D




A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

Which of the following is an example of testing as part of the requirements specification phase?

  1. A requirements review meeting
  2. A business analyst eliciting requirements
  3. Performing acceptance tests against requirements
  4. A test report showing requirements coverage

Answer(s): A




Your company is considering whether or not to purchase a test tool suite from a respectable vendor. Your manager has searched the internet for comparable products but none of them meets his specific requirements. A tool demonstration has been arranged for next week and your team has been invited to attend. The tool suite consists of a test management tool, test execution tool and a requirements management tool. There is the possibility of adding a performance testing tool at a later stage. You have decided to attend the demo but raise some issues beforehand regarding expectations.

Select THREE issues from the options provided that should at least be raised.

  1. Has there been sufficient comparison of tools?
  2. What are the problems we are trying to address?
  3. Do we have a set of tool requirements to validate the tool against?
  4. How will the implementation be organized?
  5. Which project will be selected to perform the tool pilot?
  6. Is customized training available?
  7. How will the change process be managed?

Answer(s): A,B,C




Your company is considering whether or not to purchase a test tool suite from a respectable vendor. Your manager has searched the internet for comparable products but none of them meets his specific requirements. A tool demonstration has been arranged for next week and your team has been invited to attend. The tool suite consists of a test management tool, test execution tool and a requirements management tool. There is the possibility of adding a performance testing tool at a later stage. You have decided to attend the demo but raise some issues beforehand regarding expectations.

Which of the following would you least expect to form part of the analysis of initial tool costs?

  1. Integration with other tools
  2. Learning time required to use the new tool
  3. Tool portability
  4. Evaluation of suitable tools

Answer(s): C




The project situation after 11 months is:

- The first increment was released one week late but contained sufficient functionality to bedeclared fit for purpose'. However, there were 20 outstanding incidents deferred to increment two.

- The amount of voluntary overtime worked PV the test team has reduced the second Incrementslippage to just 3 weeks.

- There is talk of reducing the scope of requirements. The purpose of this is to first deliver theapplication with support for manual testing and then to provide a delivery * weeks later to resolve any remaining points and provide support for automated testing (i.e. the link to the capture-replay tool).

- Concerns have been expressed by a section of the user community, that in some places theusability is very poor.

Which of the following are valid reasons for adopting a different life cycle (from the V model), for increments after the first year?

i). We do not have a clear understanding of the requirements from a customer perspective.
ii). We see the risk of delivering requested functionality late as being higher than the risk ofdelivering a lower quality product.
iii). We do not have a budget for additional regression testing which is needed to ensure thatexisting functionality is not compromised by future iterations.
iv). The company test strategy does not fit well within the V life cycle model.

  1. (i) and (ii)
  2. (i) and (iv)
  3. (ii) and (iii)
  4. (ii) and (iv)

Answer(s): A



Share your comments for iSQI CTAL-TM-001 exam with other users:

J
john
11/16/2023 5:13:00 PM

i gave the amazon dva-c02 tests today and passed. very helpful.

T
Tao
11/20/2023 8:53:00 AM

there is an incorrect word in the problem statement. for example, in question 1, there is the word "speci c". this is "specific. in the other question, there is the word "noti cation". this is "notification. these mistakes make this site difficult for me to use.

P
patricks
10/24/2023 6:02:00 AM

passed my az-120 certification exam today with 90% marks. studied using the dumps highly recommended to all.

A
Ananya
9/14/2023 5:17:00 AM

i need it, plz make it available

J
JM
12/19/2023 2:41:00 PM

q47: intrusion prevention system is the correct answer, not patch management. by definition, there are no patches available for a zero-day vulnerability. the way to prevent an attacker from exploiting a zero-day vulnerability is to use an ips.

R
Ronke
8/18/2023 10:39:00 AM

this is simple but tiugh as well

C
CesarPA
7/12/2023 10:36:00 PM

questão 4, segundo meu compilador local e o site https://www.jdoodle.com/online-java-compiler/, a resposta correta é "c" !

J
Jeya
9/13/2023 7:50:00 AM

its very useful

T
Tracy
10/24/2023 6:28:00 AM

i mastered my skills and aced the comptia 220-1102 exam with a score of 920/1000. i give the credit to for my success.

J
James
8/17/2023 4:33:00 PM

real questions

A
Aderonke
10/23/2023 1:07:00 PM

very helpful assessments

S
Simmi
8/24/2023 7:25:00 AM

hi there, i would like to get dumps for this exam

J
johnson
10/24/2023 5:47:00 AM

i studied for the microsoft azure az-204 exam through it has 100% real questions available for practice along with various mock tests. i scored 900/1000.

M
Manas
9/9/2023 1:48:00 AM

please upload 1z0-1072-23 exam dups

S
SB
9/12/2023 5:15:00 AM

i was hoping if you could please share the pdf as i’m currently preparing to give the exam.

J
Jagjit
8/26/2023 5:01:00 PM

i am looking for oracle 1z0-116 exam

S
S Mallik
11/27/2023 12:32:00 AM

where we can get the answer to the questions

P
PiPi Li
12/12/2023 8:32:00 PM

nice questions

D
Dan
8/10/2023 4:19:00 PM

question 129 is completely wrong.

G
gayathiri
7/6/2023 12:10:00 AM

i need dump

D
Deb
8/15/2023 8:28:00 PM

love the site.

M
Michelle
6/23/2023 4:08:00 AM

can you please upload it back?

A
Ajay
10/3/2023 12:17:00 PM

could you please re-upload this exam? thanks a lot!

H
him
9/30/2023 2:38:00 AM

great about shared quiz

S
San
11/14/2023 12:46:00 AM

goood helping

W
Wang
6/9/2022 10:05:00 PM

pay attention to questions. they are very tricky. i waould say about 80 to 85% of the questions are in this exam dump.

M
Mary
5/16/2023 4:50:00 AM

wish you would allow more free questions

T
thomas
9/12/2023 4:28:00 AM

great simulation

S
Sandhya
12/9/2023 12:57:00 AM

very g inood

A
Agathenta
12/16/2023 1:36:00 PM

q35 should be a

M
MD. SAIFUL ISLAM
6/22/2023 5:21:00 AM

sap c_ts450_2021

S
Satya
7/24/2023 3:18:00 AM

nice questions

S
sk
5/13/2023 2:10:00 AM

ecellent materil for unserstanding

G
Gerard
6/29/2023 11:14:00 AM

good so far

AI Tutor 👋 I’m here to help!