iSQI CTAL-TM-001 ISTQB Certified Tester Advanced Level Test Manager (CTAL-TM_001) CTAL-TM-001 Exam Questions in PDF

Free iSQI CTAL-TM-001 Dumps Questions (page: 2)


A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

As part of the improvement program, the organization is also looking at tool support. Which type of tool could be used to ensure higher quality of the code to be reviewed?

  1. Review tool
  2. Test execution tool
  3. Static analysis tool
  4. Test design tool

Answer(s): C




A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

What is the main reason why reviews are especially beneficial in the above-mentioned scenario?

  1. They ensure a common understanding of the product.
  2. They find defects early.
  3. They enhance project communication.
  4. They can be performed without exercising the code.

Answer(s): D




A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

The introduction of reviews and inspections has often failed as a process improvement action. Identify the THREE most important measures that should be taken to reduce the risk that this test process improvement will fail.

  1. Process ownership and experienced moderators who drive the inspection process.
  2. Management support
  3. Training of those involved
  4. The availability of stands and processes
  5. Usage of a more traditional software development lifecycle
  6. Alignment with software process improvement
  7. Using a reference model, e.g. TMMi

Answer(s): A,B,C




A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

IEEE 1028 also defines “management review” as a type of review. What is the main purpose of a management review?

  1. Align technical concepts during the design phase
  2. Establish a common understanding of requirements
  3. Provide independent evaluation of compliance to processes, regulations, standards etc.
  4. To monitor progress, assess the status of a project, and make decisions about future actions

Answer(s): D




A software development organization wants to introduce some specific improvements to its test process. Currently, most of their testing resources are focussedon system testing. They are developing embedded software, and do not have a simulation environment to enable them toexecute software modules on the development host. They have been advised that introducing inspections and reviews could be the most appropriate step forward.

Which of the following is an example of testing as part of the requirements specification phase?

  1. A requirements review meeting
  2. A business analyst eliciting requirements
  3. Performing acceptance tests against requirements
  4. A test report showing requirements coverage

Answer(s): A




Your company is considering whether or not to purchase a test tool suite from a respectable vendor. Your manager has searched the internet for comparable products but none of them meets his specific requirements. A tool demonstration has been arranged for next week and your team has been invited to attend. The tool suite consists of a test management tool, test execution tool and a requirements management tool. There is the possibility of adding a performance testing tool at a later stage. You have decided to attend the demo but raise some issues beforehand regarding expectations.

Select THREE issues from the options provided that should at least be raised.

  1. Has there been sufficient comparison of tools?
  2. What are the problems we are trying to address?
  3. Do we have a set of tool requirements to validate the tool against?
  4. How will the implementation be organized?
  5. Which project will be selected to perform the tool pilot?
  6. Is customized training available?
  7. How will the change process be managed?

Answer(s): A,B,C




Your company is considering whether or not to purchase a test tool suite from a respectable vendor. Your manager has searched the internet for comparable products but none of them meets his specific requirements. A tool demonstration has been arranged for next week and your team has been invited to attend. The tool suite consists of a test management tool, test execution tool and a requirements management tool. There is the possibility of adding a performance testing tool at a later stage. You have decided to attend the demo but raise some issues beforehand regarding expectations.

Which of the following would you least expect to form part of the analysis of initial tool costs?

  1. Integration with other tools
  2. Learning time required to use the new tool
  3. Tool portability
  4. Evaluation of suitable tools

Answer(s): C




The project situation after 11 months is:

- The first increment was released one week late but contained sufficient functionality to bedeclared fit for purpose'. However, there were 20 outstanding incidents deferred to increment two.

- The amount of voluntary overtime worked PV the test team has reduced the second Incrementslippage to just 3 weeks.

- There is talk of reducing the scope of requirements. The purpose of this is to first deliver theapplication with support for manual testing and then to provide a delivery * weeks later to resolve any remaining points and provide support for automated testing (i.e. the link to the capture-replay tool).

- Concerns have been expressed by a section of the user community, that in some places theusability is very poor.

Which of the following are valid reasons for adopting a different life cycle (from the V model), for increments after the first year?

i). We do not have a clear understanding of the requirements from a customer perspective.
ii). We see the risk of delivering requested functionality late as being higher than the risk ofdelivering a lower quality product.
iii). We do not have a budget for additional regression testing which is needed to ensure thatexisting functionality is not compromised by future iterations.
iv). The company test strategy does not fit well within the V life cycle model.

  1. (i) and (ii)
  2. (i) and (iv)
  3. (ii) and (iii)
  4. (ii) and (iv)

Answer(s): A



Share your comments for iSQI CTAL-TM-001 exam with other users:

I
Isaac
10/28/2023 2:30:00 PM

great case study

M
Malviya
2/3/2023 9:10:00 AM

the questions in this exam dumps is valid. i passed my test last monday. i only whish they had their pricing in inr instead of usd. but it is still worth it.

R
rsmyth
5/18/2023 12:44:00 PM

q40 the answer is not d, why are you giving incorrect answers? snapshot consolidation is used to merge the snapshot delta disk files to the vm base disk

K
Keny
6/23/2023 9:00:00 PM

thanks, very relevant

M
Muhammad Rawish Siddiqui
11/29/2023 12:14:00 PM

wrong answer. it is true not false.

J
Josh
7/10/2023 1:54:00 PM

please i need the mo-100 questions

V
VINNY
6/2/2023 11:59:00 AM

very good use full

A
Andy
12/6/2023 5:56:00 AM

very valid questions

M
Mamo
8/12/2023 7:46:00 AM

will these question help me to clear pl-300 exam?

M
Marial Manyang
7/26/2023 10:13:00 AM

please provide me with these dumps questions. thanks

A
Amel Mhamdi
12/16/2022 10:10:00 AM

in the pdf downloaded is write google cloud database engineer i think that it isnt the correct exam

A
Angel
8/30/2023 10:58:00 PM

i think you have the answers wrong regarding question: "what are three core principles of web content accessibility guidelines (wcag)? answer: robust, operable, understandable

S
SH
5/16/2023 1:43:00 PM

these questions are not valid , they dont come for the exam now

S
sudhagar
9/6/2023 3:02:00 PM

question looks valid

V
Van
11/24/2023 4:02:00 AM

good for practice

D
Divya
8/2/2023 6:54:00 AM

need more q&a to go ahead

R
Rakesh
10/6/2023 3:06:00 AM

question 59 - a newly-created role is not assigned to any user, nor granted to any other role. answer is b https://docs.snowflake.com/en/user-guide/security-access-control-overview

N
Nik
11/10/2023 4:57:00 AM

just passed my exam today. i saw all of these questions in my text today. so i can confirm this is a valid dump.

D
Deep
6/12/2023 7:22:00 AM

needed dumps

T
tumz
1/16/2024 10:30:00 AM

very helpful

N
NRI
8/27/2023 10:05:00 AM

will post once the exam is finished

K
kent
11/3/2023 10:45:00 AM

relevant questions

Q
Qasim
6/11/2022 9:43:00 AM

just clear exam on 10/06/2202 dumps is valid all questions are came same in dumps only 2 new questions total 46 questions 1 case study with 5 question no lab/simulation in my exam please check the answers best of luck

C
Cath
10/10/2023 10:09:00 AM

q.112 - correct answer is c - the event registry is a module that provides event definitions. answer a - not correct as it is the definition of event log

S
Shiji
10/15/2023 1:31:00 PM

good and useful.

A
Ade
6/25/2023 1:14:00 PM

good questions

P
Praveen P
11/8/2023 5:18:00 AM

good content

A
Anastasiia
12/28/2023 9:06:00 AM

totally not correct answers. 21. you have one gcp account running in your default region and zone and another account running in a non-default region and zone. you want to start a new compute engine instance in these two google cloud platform accounts using the command line interface. what should you do? correct: create two configurations using gcloud config configurations create [name]. run gcloud config configurations activate [name] to switch between accounts when running the commands to start the compute engine instances.

P
Priyanka
7/24/2023 2:26:00 AM

kindly upload the dumps

N
Nabeel
7/25/2023 4:11:00 PM

still learning

G
gure
7/26/2023 5:10:00 PM

excellent way to learn

C
ciken
8/24/2023 2:55:00 PM

help so much

B
Biswa
11/20/2023 9:28:00 AM

understand sql col.

S
Saint Pierre
10/24/2023 6:21:00 AM

i would give 5 stars to this website as i studied for az-800 exam from here. it has all the relevant material available for preparation. i got 890/1000 on the test.

AI Tutor 👋 I’m here to help!