Huawei HCSP-Presales-Campus Network Planning and Design V1.0 (Replaced with H19-401_V2.0) H19-401_V1.0 Dumps in PDF

Free Huawei H19-401_V1.0 Real Questions (page: 9)

What types of attack detection are supported over the air interface?

  1. Flood attack detection
  2. Spoofing attack detection
  3. Weak IV attack detection
  4. Brute force PSK cracking detection

Answer(s): A,B,C,D

Explanation:

Huawei’s WIDS (Wireless Intrusion Detection System) and WIPS (Wireless Intrusion Prevention System) provide comprehensive air interface protection. They are designed to detect:
Flood attacks (A): Detecting an abnormal volume of management frames (like Auth/Deauth floods).
Spoofing attacks (B): Detecting unauthorized APs or STAs using the MAC addresses of authorized devices.
Weak IV attacks (C): Detecting attempts to exploit older encryption (like WEP) by identifying weak Initialization Vectors.
Brute force cracking (D): Monitoring for repeated authentication failures that indicate an attempt to guess WPA/WPA2-PSK or WAPI-PSK keys.



NETCONF is based on the Extensible Markup Language (XML).

  1. True
  2. False

Answer(s): A

Explanation:

NETCONF (Network Configuration Protocol) is the primary management protocol used in the Xinghe Intelligent Campus solution for communication between iMaster NCE-Campus and network devices. It uses a multi-layer structure where the Content Layer (data) and Operations Layer are encoded in XML. This allows for a structured, hierarchical representation of configuration data and state information, making it more efficient and programmable than traditional CLI or SNMP.



Which of the following APs is not involved in the campus energy saving solution?

  1. Energy-saving AP
  2. IoT AP
  3. Leader AP
  4. Assurance AP

Answer(s): B

Explanation:

Huawei’s Intelligent Energy Saving Solution (Zero-bit, Zero-watt) uses AI to transition APs between states based on traffic demand. In this logic:
Energy-saving APs (A): Are those identified by the system to enter a deep sleep/hibernation mode when traffic is low.
Assurance APs (D): Remain active to provide basic signal coverage and "listen" for wake-up triggers.
Leader APs (C): Function as the local controller (in small-scale deployments) to coordinate these states.
IoT APs (B), while they support converged services, are not defined as a specific functional role within the energy-saving state-switching algorithm itself, as IoT devices often require persistent, low-power connectivity that differs from standard Wi-Fi user traffic patterns.



Which of the following information is contained in the DHCP snooping binding table?

  1. VLAN
  2. MAC address
  3. Interface
  4. IP address

Answer(s): A,B,C,D

Explanation:

DHCP Snooping is a key security feature in campus access layer design.
When a client obtains an IP address, the switch populates a binding table that links the MAC address (B) and the assigned IP address (D) to the specific physical Interface (C) and the VLAN (A) ID. This table is then used by other security features like Dynamic ARP Inspection (DAI) and IP Source Guard (IPSG) to prevent spoofing attacks by verifying that incoming traffic matches the authorized entries in the binding table.



On a traditional network, network planning, configuration, and O&M are performed by professional network engineers. In contrast, on an SDN network, network services are abstracted, orchestrated, and automatically provisioned on demand through a centralized network control system.

  1. True
  2. False

Answer(s): A

Explanation:

This statement describes the fundamental shift from traditional networking to the SDN (Software-Defined Networking) model used in Huawei's Xinghe Intelligent Campus. By using iMaster NCE-Campus, the network complexity is hidden behind a GUI. Instead of manual, box-by-box configuration (CLI), services are defined as "intents" (e.g., "Guest Access" or "Production Fabric"), which the controller then automatically translates into configurations and deploys across the entire network fabric.



Which of the following is the main reason why SD-WAN requires high-specification devices?

  1. Encryption required
  2. Service orchestration
  3. Support for multiple automatic deployment scenarios
  4. Forwarding processing based on Layer 3 to Layer 7 applications

Answer(s): D

Explanation:

While encryption (IPsec) is important, the "Intelligence" in SD-WAN comes from Application-based Routing. To perform Intelligent Traffic Steering, the gateway must identify traffic not just by IP/Port (L3/L4), but by the actual application (L7), such as distinguishing between Office 365 and YouTube.
This requires DPI (Deep Packet Inspection) and complex signature matching, which is significantly more CPU and memory intensive than traditional destination-based routing, thus necessitating high-specification hardware.



Which of the following are the advantages of SDN?

  1. Open programmability
  2. Network automation
  3. Rapid service provisioning
  4. Network virtualization

Answer(s): A,B,C,D

Explanation:

The Huawei Xinghe Intelligent Campus leverages SDN to deliver four core benefits:
Open Programmability (A): Via Northbound APIs for integration with 3rd-party apps.
Network Automation (B): Automating full-lifecycle O&M.
Rapid Service Provisioning (C): Reducing deployment time from weeks to minutes via templates.
Network Virtualization (D): Using VXLAN/EVPN to create multiple isolated logical networks (e.g., IoT, Office, Security) on a single physical infrastructure.



Hybrid cables do not support PoE++ power supply.

  1. True
  2. False

Answer(s): B

Explanation:

This statement is False. Huawei’s Hybrid Optical-Electrical Cables (Photoelectric cables) are specifically designed to overcome the 100-meter distance limitation of traditional Ethernet. They combine optical fibers for high-speed data (10G/25G/100G) and copper wires for power. These cables are a core part of the "Simplified Architecture" and do support PoE++ (up to 90W), allowing high-power Wi-Fi 7 APs to be powered over distances of up to 300–500 meters from a central switch.



Share your comments for Huawei H19-401_V1.0 exam with other users:

A
Asad Khan
11/1/2023 2:44:00 AM

answer 10 should be a because only a new project will be created & the organization is the same.

R
Raj
9/12/2023 3:49:00 PM

can you please upload the dump again

C
Christian Klein
6/23/2023 1:32:00 PM

is it legit questions from sap certifications ?

A
anonymous
1/12/2024 3:34:00 PM

question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).

N
NSPK
1/18/2024 10:26:00 AM

q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save

M
mohamed abdo
9/1/2023 4:59:00 AM

very useful

T
Tom
3/18/2022 8:00:00 PM

i purchased this exam dumps from another website with way more questions but they were all invalid and outdate. this exam dumps was right to the point and all from recent exam. it was a hard pass.

E
Edrick GOP
10/24/2023 6:00:00 AM

it was a good experience and i got 90% in the 200-901 exam.

A
anonymous
8/10/2023 2:28:00 AM

hi please upload this

B
Bakir
7/6/2023 7:24:00 AM

please upload it

A
Aman
6/18/2023 1:27:00 PM

really need this dump. can you please help.

N
Neela Para
1/8/2024 6:39:00 PM

really good and covers many areas explaining the answer.

K
Karan Patel
8/15/2023 12:51:00 AM

yes, can you please upload the exam?

N
NISHAD
11/7/2023 11:28:00 AM

how many questions are there in these dumps?

P
Pankaj
7/3/2023 3:57:00 AM

hi team, please upload this , i need it.

D
DN
9/4/2023 11:19:00 PM

question 14 - run terraform import: this is the recommended best practice for bringing manually created or destroyed resources under terraform management. you use terraform import to associate an existing resource with a terraform resource configuration. this ensures that terraform is aware of the resource, and you can subsequently manage it with terraform.

Z
Zhiguang
8/19/2023 11:37:00 PM

please upload dump. thanks in advance.

D
deedee
12/23/2023 5:51:00 PM

great great

A
Asad Khan
11/1/2023 3:10:00 AM

answer 16 should be b your organizational policies require you to use virtual machines directly

S
Sale Danasabe
10/24/2023 5:21:00 PM

the question are kind of tricky of you didnt get the hnag on it.

L
Luis
11/16/2023 1:39:00 PM

can anyone tell me if this is for rhel8 or rhel9?

H
hik
1/19/2024 1:47:00 PM

good content

B
Blessious Phiri
8/15/2023 2:18:00 PM

pdb and cdb are critical to the database

Z
Zuned
10/22/2023 4:39:00 AM

till 104 questions are free, lets see how it helps me in my exam today.

M
Muhammad Rawish Siddiqui
12/3/2023 12:11:00 PM

question # 56, answer is true not false.

A
Amaresh Vashishtha
8/27/2023 1:33:00 AM

i would be requiring dumps to prepare for certification exam

A
Asad
9/8/2023 1:01:00 AM

very helpful

B
Blessious Phiri
8/13/2023 3:10:00 PM

control file is the heart of rman backup

S
Senthil
9/19/2023 5:47:00 AM

hi could you please upload the ibm c2090-543 dumps

H
Harry
6/27/2023 7:20:00 AM

appriciate if you could upload this again

A
Anonymous
7/10/2023 4:10:00 AM

please upload the dump

R
Raja
6/20/2023 5:30:00 AM

i found some questions answers mismatch with explanation answers. please properly update

D
Doora
11/30/2023 4:20:00 AM

nothing to mention

D
deally
1/19/2024 3:41:00 PM

knowable questions

AI Tutor 👋 I’m here to help!