Huawei H13-629 Dumps PDF Free Download - Page: 5

QUESTION: 33

Customers use Redhat Linux enterprise 6 LVM to manage user data disks in the cluster. When using pvmove data migration you can not enforce OK. What is a possible reason for this.

Pvmove command does not support Linux cluster.
Redhat Linux enterprise 6 version of lvm does not support the pvmove command.
You need to install the cmirror package and run it on the cluster server.
Need to lvm version down to 1.0 before using pvmove migration data.

Answer(s): C

Reveal Solution Next Question

A N8500 (V200R001) clustered NAS system with a set of storage units at the back end. Three RAID Groups, respectively named RG1, RG2, RG3 have been created on the storage unit. There are two LUNs under each RAID group, the capacity of each LUN is 12G.
The names are RG1-LUN1, RG1-LUN2, RG2-LUN1, RG2-LUN2, RG3-LUN1, RG3-LUN2, and all LUNs are
added to one in storage pool. The purpose is to create a file system based on these LUNs. What of the following will certainly create a failure?

fs create striped fs01 10g 3 RG1-LUN1, RG2-LUN1, RG3-LUN1 stripeunit = 2048 blksize = 8192
fs create mirrored fs02 10g 2 RG1-LUN2, RG2-LUN2 stripeunit = 2048 blksize = 8192
fs create mirrored-stripe fs03 10g 2 2 RG1-LUn1, RG2-LUN1 protection = disk stripeunit = 2048 blksize = 8192
fs create striped-miiro fs04 20g 2 3 RG1-LUn1, RG1-LUN2, RG2-LUN1, RG2-LUN2, RG3-LUN1, RG3- LUN2 protection = disk stripeunit = 512 blksize = 1024

Answer(s): C

Reveal Solution Next Question

QUESTION: 35

The Redhat Linux Enterprise 6 cp command is used to complete the operating system data migration. What steps are needed to verify the transfer? (Multiple choice)

Check if the size of the migrated file is the same as the original data.
Check if the number of documents corresponds to the original data
Check if each file with read and write permissions corresponds to the original data
Whether the time for reviewing the case file corresponds to the original data.

Answer(s): A,B,C

Reveal Solution Next Question

QUESTION: 36

HPUX system has two user volume groups: VG01 and VG02. If you execute the following commands: vgexport-v-s-p -m /tmp/vg01.map / dev / vg01 and vgexport-v -s -m /tmp/vg01.map / dev / vg02.
What will be available using vglist to view the volume?

vg01
vg02
vg01 vg02
empty

Answer(s): A

Reveal Solution Next Question

QUESTION: 37

A banking business running background storage system requirements are as follows:

(1)Business Impact. The business impact generated by the operating system is about 100KB.
(2)The service operation system is the whole GE network. The server and operating system are GE network. Follow-up to consider the business needs to upgrade to 10GE.
(3)Only requires 72TB of total space, the latter expansion priority to expand the disk
(4)Only 20U of rack space is reserved for the current storage devices.

The configuration of three nodes and switches is prioritized to meet the requirements of the machine room. Cabinet planning based on the above requirements.
What are the more appropriate networking solutions?

Program One:
1* OceanStor 9000 C Node
36 * 2TB SATA configuration
2* Front-end GE + 2 * Rear-end 10GE
Scenario 2: 3 * Oceanstor 9000 C Node
36 * 2TB SATA hard drive;
2* Front-end GE + back-end 2 * 10GE
program three:
3* OceanStor 9000 P Node
36 * 2TB SAS configuration
2* Front-end GE + 2 * Rear-end 10GE
Program Four:
3* OceanStor 9000 M Node
36 * 2TB SAS configuration
2 * Front-end GE + 2 * Rear-end 10GE

Answer(s): C

Reveal Solution Next Question

QUESTION: 38

Which of the following best practice descriptions of Oralce database is correct? (Multiple choice)

OLAP business query output is usually a statistical value (using group by with order by), so you can set a larger SGA-target value (relative to OLTP).
It is recommended to use UDEV UUID and drive letter binding, in Linux environment configuration Oracle database, to avoid subsequent maintenance letter changes caused by the database which cannot start.
If the database OLTP business log write is very frequent, it is recommended that the appropriate online log file up, but it is recommended not to exceed 128MB.
In Windows2008 or windows2012 operating system environment, in order to improve I / O processing efficiency, MBR partition is created, and diskpart command is recommended to set the partition alignment.

Answer(s): B,C,D

Reveal Solution Next Question

QUESTION: 39

Which of the following is a description of the UltraPath multipath setting? (Multiple answers)

The mode of operation of the array can be in-controller load balancing or inter-controller load balancing.
Load Balancing Mode Including wheel training algorithm, the maximum queue depth algorithm, the maximum workload algorithm
After the connection is interrupted between the LUN home controller and the host, the host accesses the LUN through the peer controller. In this case, the over-trail software defaults the switched home controller of the LUN to the remote controller.
When multipath detects a preferred controller failure recovery, the I / O is resumed immediately at the preferred controller by default.

Answer(s): A,C

Reveal Solution Next Question

QUESTION: 40

True or False, the disaster recovery plan of Huawei means that when the production site fails, the production business is automatically switched to run the disaster recovery site.

True
False

Answer(s): B

Reveal Solution Next Question

Huawei HCIE-Storage H13-629 Dumps in PDF

Free Huawei H13-629 Real Questions (page: 5)

QUESTION: 33

QUESTION: 34

QUESTION: 35

QUESTION: 36

QUESTION: 37

QUESTION: 38

QUESTION: 39

QUESTION: 40