Huawei HCIP-Collaboration V4.0 H11-861_V4.0 Dumps in PDF

Free Huawei H11-861_V4.0 Real Questions (page: 9)

Assume that a channel of 4CIF analog TV signal uses a 48-bit color depth.
Which of the following is nearest to the stream transmission speed of the signal before compression and encoding?

  1. 238 Mbit/s
  2. 557 Mbit/s
  3. 446 Mbit/s
  4. 600 Mbit/s

Answer(s): D

Explanation:

4CIF (704×576) at 30 fps gives 704 × 576 × 30 12.17 million pixels/s. At 48 bits per pixel, that's 12.17 M × 48 584 Mbit/s, which is nearest to 600 Mbit/s.



Currently, the widely used video compression standards include H.263, H.264, H.265, MPEG-1, MPEG-2, and MPEG-4. The H.26X series standards are mainly used for real time video communication, and the MPEG series standards are mainly used for video storage (DVD), video broadcast, and video streaming media.

  1. TRUE
  2. FALSE

Answer(s): A

Explanation:

The H.26x family (H.263, H.264/AVC, H.265/HEVC) was designed with low-latency, real-time encoding/decoding in mind (ideal for videoconferencing and streaming calls) whereas MPEG-1/2/4 were originally optimized for file-based storage (VCD/DVD), broadcast and progressive streaming. Modern deployments often blend these. For example, using H.265 for both live calls and high- efficiency streaming and newer standards (like H.266/VVC) are now emerging.



Which of the following statements is true about image sampling?

  1. The YUV 4:2:0 sampling mode is half the size of the YUV 4:4:4 sampling mode.
  2. For human eyes, the Y component in YUV is the most important. Therefore, downsampling can be performed on the UV components.
  3. RGB components have weak correlation, which is unfavorable for video image compression.
    Therefore, RGB is often used for image display.
  4. The transmission rate of video data using YUV 4:2:0 is 140 Mbit/s. If the 4:2:2 mode is used, the transmission rate required by the video is 175 Mbit/s.

Answer(s): A

Explanation:

YUV 4:2:0 subsamples chroma by a factor of two in both horizontal and vertical dimensions, reducing total data to half of the full-resolution YUV 4:4:4 format.



Which of the following header fields is used to indicate the route of a response message?

  1. Via
  2. From
  3. To
  4. Contact

Answer(s): A

Explanation:

The Via header records each hop a request takes and is used to route the corresponding response back along the same path.



FILL BLANK
In a SIP-only multipoint conference, when a participant sends the presentation, the system uses the ____________ protocol for presentation. (Enter the abbreviation.)

  1. B, F, C, P

Answer(s): A

Explanation:

In SIP-only multipoint conferences, presentation content is delivered using the Binary Floor Control Protocol (BFCP), which handles floor control and content distribution.



The start line of a SIP response consists of three parts: method (Method), request URI (Request-URI), and protocol version (SIP-VERSION).

  1. TRUE
  2. FALSE

Answer(s): B

Explanation:

A SIP response start line is a Status-Line containing the SIP version, status code, and reason phrase - not the method and Request-URI.



SIP and SDP are independent of each other. SIP can implement multimedia calls independently to add new applications or media easily.

  1. TRUE
  2. FALSE

Answer(s): B

Explanation:

SIP relies on SDP for session description in multimedia calls; it cannot negotiate media parameters independently of SDP.



SIP is an application-layer protocol independent of the transport-layer protocols. It can be carried over different transport protocols, such as UDP, TCP, TLS, and SCTP. Currently, SCTP is the most commonly used transport-layer protocol.

  1. TRUE
  2. FALSE

Answer(s): B

Explanation:

While SIP is transport-agnostic and can run over UDP, TCP, TLS, or SCTP, UDP remains the predominant transport - SCTP is not the most commonly used.



Share your comments for Huawei H11-861_V4.0 exam with other users:

P
Praveen P
11/8/2023 5:18:00 AM

good content

A
Anastasiia
12/28/2023 9:06:00 AM

totally not correct answers. 21. you have one gcp account running in your default region and zone and another account running in a non-default region and zone. you want to start a new compute engine instance in these two google cloud platform accounts using the command line interface. what should you do? correct: create two configurations using gcloud config configurations create [name]. run gcloud config configurations activate [name] to switch between accounts when running the commands to start the compute engine instances.

P
Priyanka
7/24/2023 2:26:00 AM

kindly upload the dumps

N
Nabeel
7/25/2023 4:11:00 PM

still learning

G
gure
7/26/2023 5:10:00 PM

excellent way to learn

C
ciken
8/24/2023 2:55:00 PM

help so much

B
Biswa
11/20/2023 9:28:00 AM

understand sql col.

S
Saint Pierre
10/24/2023 6:21:00 AM

i would give 5 stars to this website as i studied for az-800 exam from here. it has all the relevant material available for preparation. i got 890/1000 on the test.

R
Rose
7/24/2023 2:16:00 PM

this is nice.

A
anon
10/15/2023 12:21:00 PM

q55- the ridac workflow can be modified using flow designer, correct answer is d not a

N
NanoTek3
6/13/2022 10:44:00 PM

by far this is the most accurate exam dumps i have ever purchased. all questions are in the exam. i saw almost 90% of the questions word by word.

E
eriy
11/9/2023 5:12:00 AM

i cleared the az-104 exam by scoring 930/1000 on the exam. it was all possible due to this platform as it provides premium quality service. thank you!

M
Muhammad Rawish Siddiqui
12/8/2023 8:12:00 PM

question # 232: accessibility, privacy, and innovation are not data quality dimensions.

V
Venkat
12/27/2023 9:04:00 AM

looks wrong answer for 443 question, please check and update

V
Varun
10/29/2023 9:11:00 PM

great question

D
Doc
10/29/2023 9:36:00 PM

question: a user wants to start a recruiting posting job posting. what must occur before the posting process can begin? 3 ans: comment- option e is incorrect reason: as part of enablement steps, sap recommends that to be able to post jobs to a job board, a user need to have the correct permission and secondly, be associated with one posting profile at minimum

I
It‘s not A
9/17/2023 5:31:00 PM

answer to question 72 is d [sys_user_role]

I
indira m
8/14/2023 12:15:00 PM

please provide the pdf

R
ribrahim
8/1/2023 6:05:00 AM

hey guys, just to let you all know that i cleared my 312-38 today within 1 hr with 100 questions and passed. thank you so much brain-dumps.net all the questions that ive studied in this dump came out exactly the same word for word "verbatim". you rock brain-dumps.net!!! section name total score gained score network perimeter protection 16 11 incident response 10 8 enterprise virtual, cloud, and wireless network protection 12 8 application and data protection 13 10 network défense management 10 9 endpoint protection 15 12 incident d

A
Andrew
8/23/2023 6:02:00 PM

very helpful

L
latha
9/7/2023 8:14:00 AM

useful questions

I
ibrahim
11/9/2023 7:57:00 AM

page :20 https://exam-dumps.com/snowflake/free-cof-c02-braindumps.html?p=20#collapse_453 q 74: true or false: pipes can be suspended and resumed. true. desc.: pausing or resuming pipes in addition to the pipe owner, a role that has the following minimum permissions can pause or resume the pipe https://docs.snowflake.com/en/user-guide/data-load-snowpipe-intro

F
Franklin Allagoa
7/5/2023 5:16:00 AM

i want hcia exam dumps

S
SSA
12/24/2023 1:18:00 PM

good training

B
BK
8/11/2023 12:23:00 PM

very useful

D
Deepika Narayanan
7/13/2023 11:05:00 PM

yes need this exam dumps

B
Blessious Phiri
8/15/2023 3:31:00 PM

these questions are a great eye opener

J
Jagdesh
9/8/2023 8:17:00 AM

thank you for providing these questions and answers. they helped me pass my exam. you guys are great.

T
TS
7/18/2023 3:32:00 PM

good knowledge

A
Asad Khan
11/1/2023 2:44:00 AM

answer 10 should be a because only a new project will be created & the organization is the same.

R
Raj
9/12/2023 3:49:00 PM

can you please upload the dump again

C
Christian Klein
6/23/2023 1:32:00 PM

is it legit questions from sap certifications ?

A
anonymous
1/12/2024 3:34:00 PM

question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).

N
NSPK
1/18/2024 10:26:00 AM

q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save

AI Tutor 👋 I’m here to help!