A company has HPE Aruba Networking APs running AOS-10 that connect to AOS-CX switches. The APs will:. Authenticate as 802.1X supplicants to HPE Aruba Networking ClearPass Policy Manager (CPPM). Be assigned to the "APs" role on the switches. Have their traffic forwarded locallyWhat information do you need to help you determine the VLAN settings for the "APs" role?
Answer(s): D
To determine the VLAN settings for the "APs" role on AOS-CX switches, it is crucial to know whether the APs bridge or tunnel traffic on their SSIDs. If the APs are bridging traffic, the VLAN settings on the switch need to align with the VLANs used by the SSIDs. If the APs are tunneling traffic to a controller or gateway, the VLAN settings might differ as the traffic is encapsulated and forwarded through the tunnel. Understanding this aspect ensures that the VLAN configuration on the switches correctly supports the traffic forwarding method employed by the APs.
Aruba's AOS-10 and AOS-CX documentation provide guidance on VLAN configuration and traffic forwarding methods, highlighting the importance of aligning VLAN settings with the APs' traffic handling mode.
Your company wants to implement Tunneled EAP (TEAP).How can you set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to enforce certificated- based authentication for clients using TEAP?
To set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to enforce certificate-based authentication for clients using Tunneled EAP (TEAP), you need to select an EAP-TLS-type authentication method for TEAP's inner method. TEAP allows for a combination of certificate-based (EAP-TLS) and password-based (EAP-MSCHAPv2) authentication. By choosing EAP-TLS as the inner method, you ensure that the clients are authenticated using their certificates, thus enforcing certificate-based authentication within the TEAP framework.
Aruba ClearPass documentation provides detailed steps for configuring TEAP and selecting appropriate inner authentication methods to ensure secure certificate-based client authentication.
Admins have recently turned on Wireless IDS/IPS infrastructure detection at the high level on HPE Aruba Networking APs. When you check WIDS events, you see several RTS rate and CTS rate anomalies, which were triggered by neighboring APs.What can you interpret from this event?
Answer(s): B
When Wireless IDS/IPS infrastructure detection reports RTS (Request to Send) and CTS (Clear to Send) rate anomalies triggered by neighboring APs, it is often an indication of unusual, but not necessarily malicious, behavior. These anomalies can be caused by neighboring APs operating normally but under specific conditions that trigger the alerts. Before assuming a security threat, it is recommended to tune the event thresholds to better match the environment and reduce false positives. This approach helps to distinguish between normal operations and potential DoS attacks.
Aruba's Wireless IDS/IPS configuration guides provide information on interpreting events, adjusting thresholds, and distinguishing between legitimate and malicious activities in a wireless network environment.
HPE Aruba Networking Central displays an alert about an Infrastructure Attack that was detected. You go to the Security > RAPIDS events and see that the attack was "Detect adhoc using Valid SSID."What is one possible next step?
Answer(s): A
When HPE Aruba Networking Central detects an Infrastructure Attack, such as "Detect adhoc usingValid SSID," the next step is to locate the general area of the threat. You can use HPE Aruba Networking Central floorplans or the identities of the detecting APs to pinpoint the approximate location of the adhoc network. This allows you to physically investigate and address the source of the threat, ensuring that unauthorized or rogue networks are quickly identified and mitigated.
Aruba Central documentation and RAPIDS events management guides offer strategies for locating and responding to detected security threats, emphasizing the use of network tools and floorplans to effectively address potential vulnerabilities.
A company has a variety of HPE Aruba Networking solutions, including an HPE Aruba Networking infrastructure and HPE Aruba Networking ClearPass PolicyManager (CPPM). The company passes traffic from the corporate LAN destined to the data center through a third-party SRX firewall. The company would like to further protect itself from internal threats.What is one solution that you can recommend?
To further protect the company from internal threats, you can recommend having the third-party SRX firewall send Syslogs to HPE Aruba Networking ClearPass Policy Manager (CPPM). ClearPass can analyze these logs to detect potential security incidents and coordinate with network devices to respond to threats. By integrating Syslog data from the firewall, CPPM can identify malicious activities and take actions such as locking internal attackers out of the network or triggering specific security policies. This approach enhances the company's internal threat detection and response capabilities.
Aruba's ClearPass documentation on integrating with third-party security solutions and utilizing Syslog data for enhanced network security provides detailed guidance on setting up and using these features.
A company wants to apply a standard configuration to all AOS-CX switch ports and have the ports dynamically adjust their configuration based on the identity of the user or device that connects. They want to centralize configuration of the identity-based settings as much as possible.What should you recommend?
For a company that wants to apply a standard configuration to all AOS-CX switch ports and dynamically adjust their configuration based on the identity of the user or device that connects, the best approach is to have the switches download user-roles from HPE Aruba Networking ClearPass Policy Manager (CPPM). This method centralizes the configuration of identity-based settings inCPPM, allowing it to dynamically assign roles and policies to switch ports based on authentication and authorization results. This ensures consistent and secure network access control tailored to each user or device.
Aruba ClearPass and AOS-CX documentation provide comprehensive details on configuring user-roles, dynamic port configuration, and integrating ClearPass for centralized identity- based network management.
A company issues user certificates to domain computers using its Windows CA and the default user certificate template. You have set up HPE Aruba NetworkingClearPass Policy Manager (CPPM) to authenticate 802.1X clients with those certificates. However, during tests, you receive an error that authorization has failed because the usernames do not exist in the authentication source.What is one way to fix this issue and enable clients to successfully authenticate with certificates?
To fix the issue where authorization fails because the usernames do not exist in the authentication source, you can configure rules in HPE Aruba Networking ClearPass Policy Manager (CPPM) to strip the domain name from the username. When certificates are issued by a Windows CA, the username in the certificate often includes the domain (e.g., user@domain.com). ClearPass might not be able to find this format in the authentication source. By stripping the domain name, you ensure that ClearPass searches for just the username (e.g., user) in the authentication source, allowing successful authentication.
ClearPass configuration guides and documentation on certificate-based authentication detail the process of modifying and normalizing usernames to ensure successful authentication against authentication sources.
You need to use "Tips:Posture" conditions within an 802.1X service's enforcement policy.Which guideline should you follow?
When using "Tips" conditions within an 802.1X service's enforcement policy, you should enable caching roles and posture attributes from previous sessions in the service's enforcement settings. This ensures that ClearPass retains posture information from previous authentications, which is necessary for making decisions based on the current posture state of an endpoint. By caching these attributes, ClearPass can apply appropriate enforcement actions based on the device's posture status.
Aruba ClearPass documentation provides guidelines on configuring enforcement policies and using posture attributes effectively, including the importance of caching for maintaining posture information across sessions.
Share your comments for HP HPE7-A02 exam with other users:
might help me to prepare for the exam
just paid and downlaod the 2 exams using the 50% sale discount. so far i was able to download the pdf and the test engine. all looks good.
i think it should be a,c. option d goes against the principle of building anything custom unless there are no work arounds available
very legible
is this exam accurate or helpful?
please upload dump, i have exam in 2 days
this is useful
question 232 answer should be perimeter not netowrk layer. wrong answer selected
nice questions
hi team, could you please provide this dump ?
very helpful to clear the exam and understand the concept.
i think it is great that you are helping people when they need it. thanks.
cannot evaluate yet
a laptops wireless antenna is most likely located in the bezel of the lid
good examplae to learn basic
this is useful information
looks usefull
question 81 should be c.
question 18 : response isnt a ?
plaese add questions
is dumps still valid ?
thanks for this
please upload questions
please upload the question dump for professional machinelearning
question 4 answer is c. this site shows the correct answer as b. "adopt a consumption model" is clearly a cost optimization design principle. looks like im done using this site to study!!!
number 52 answer is d
just started preparing for my exam , and this site is so much help
question 35 is incorrect, the correct answer is c, it even states so: explanation: when a vm is infected with ransomware, you should not restore the vm to the infected vm. this is because the ransomware will still be present on the vm, and it will encrypt the files again. you should also not restore the vm to any vm within the companys subscription. this is because the ransomware could spread to other vms in the subscription. the best way to restore a vm that is infected with ransomware is to restore it to a new azure vm. this will ensure that the ransomware is not present on the new vm.
i would like to take psm1 exam.
cbd and pdb are key to the database
the purchase and download process is very much streamlined. the xengine application is very nice and user-friendly but there is always room for improvement.
please upload p_sapea_2023
anyone use this? the question dont seem to follow other formats and terminology i have been studying im getting worried
good questions
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your HPE7-A02, please sign in or create a free account.