HPE6-A47 Exam Questions and Answers

QUESTION: 1

An architect plans to deploy a Mobility Controller (MC) at one building in subnet 10.23.01.0/24 and another MC in another building in subnet 10.44.12.0/24. The MCs need to provide redundancy for each other. What must the architect take into account in the redundancy plan?

The MCs cannot provide any level of redundancy for each other unless one is moved into the other's subnet.
The MCs cannot be in a cluster, and they must use Virtual Router Redundancy Protocol (VRRP) to provide redundancy for each other.
The MCs can be in a cluster, but the cluster will not support features such as stateful failover.
Each MC can be the backup LMS for the other MCs' APs, but it cannot be in a cluster with the other MC.

Answer(s): B

Reveal Solution Next Question

QUESTION: 2

What is one reason to recommend dedicated Air Monitors (AMs) for a customer, as opposed to APs that are doing WIPS in AP mode (hybrid)?

AMs can operate in a hybrid operation mode in which they can support clients, scan for threats, and contain detected threats.
AMs can implement wireless containment on any channel on which they detect a threat without negative impact on clients.
AMs can detect both 802.11 and non-802.11 sources of interference to the wireless network, while Aps cannot.
AMs can maintain client and AP blacklists on their own without the need to communicate with a Mobility Controller (MC).

Answer(s): B

Reveal Solution Next Question

QUESTION: 3

An architect plans where to deploy new Aruba 320 Series APs at a customer site. The architect plans for the APs to be installed on the ceiling where power is inaccessible. The Ethernet cable run to these locations is CAT6, and the customer wants to support at least 1 GbE connectivity. The architect plans to connect each AP with one Ethernet port to a switch in a nearby wiring closet.
Which feature does the switch need to support for this deployment?

PoE+
LACP
Port channel
Smart Rate

Answer(s): A

Reveal Solution Next Question

QUESTION: 4

An architect needs to plan 802.11ac wireless deployment for an office environment with a mix of closed offices and cubicles. The coverage area is approximately 4,645 square meters (approximately 50,000 square feet) and has 350 users. The employees use the wireless network for typical office applications, such as email, Web, printing, and accessing shared files and datacenter services.
The architect plans to do a predictive site survey and use VisualRF to plan the coverage. What is a general estimate for the AP count that the architect should have in mind?

5-10
10-15
20-25
40-45

Answer(s): D

Reveal Solution Next Question

QUESTION: 5

An architect needs to plan a very high density (VHD) wireless network at a large events venue, at which thousands of attendees are expected. The architect plans to deploy a cluster of Mobility Controllers (MCs) to control the APs. It is important to support seamless roaming for wireless devise across the venue.
What should the architect ensure for the network services?

DHCP servers can support a high number of scopes with a /24 size.
A third-party firewall integrates with ClearPass to filter the guest user traffic.
A domain CA is set up to deploy certificates to a high volume of guest devices.
DHCP and DNS servers are carrier-grade and support a low transaction time.

Answer(s): B

Reveal Solution Next Question

HP HPE6-A47 Exam (page: 1)
HP Designing Aruba Solutions
Updated on: 12-Jan-2026

Access free HPE6-A47 actual exam questions, answers, explanations and user discussions.

QUESTION: 1

QUESTION: 2

QUESTION: 3

QUESTION: 4

QUESTION: 5

HP HPE6-A47 Exam (page: 1) HP Designing Aruba Solutions Updated on: 12-Jan-2026

Access free HPE6-A47 actual exam questions, answers, explanations and user discussions.

QUESTION: 1

QUESTION: 2

QUESTION: 3

QUESTION: 4

QUESTION: 5

HP HPE6-A47 Exam (page: 1)
HP Designing Aruba Solutions
Updated on: 12-Jan-2026