HP0-Y52 Exam Questions and Answers | Exam-Dumps (Page: 3)

QUESTION: 11

Refer to the exhibit.

Switch-1 is an HP ProVision switch.
A network administrator wants Switch-1 to run Open Shortest Path First (OSPF) and create neighbor relationship on Links 1 and 2. What should the administrator do to accomplish this?

Access the VLAN context for the VLANs assigned to Links 1 and 2, and enable OSPF.
Access the global configuration context, and create OSPF routes to 10.0.1.0/24 and 10.0.2.0/24.
Access the physical interface context for the Link 1 and 2 ports, and enable OSPF.
Access the OSPF area 0 context and specify the networks on Links 1 and 2 (10.0.1.0 0.0.0.255 and 10.0.2.0 0.0.0.255).

Answer(s): B

Reveal Solution Next Question

QUESTION: 12

A network administrator configures this command on an HP ProVision switch:
vlan 30 ip helper-address 10.0.3.253
The switch is able to ping 10.0.3.253. After the administrator configures the command, users in VLAN 30 report that their PCs fall to acquire addresses using DHCP.
What should the administrator ensure?

that the switch is configured with a dynamic IP routing protocol
that the switch has DHCP relay functions enabled
that the switch has DHCP server functions enabled
that the switch has an IP address on VLAN 30

Answer(s): A

Reveal Solution Next Question

QUESTION: 13

What is one difference between Network Segment-based discovery and ARP-based discovery on HP Intelligent Management Center (IMC)?

With Network Segment-based discovery, IMC can discover multiple devices. With ARP-based discovery, IMCcan only discover one device;the administrator must re-run ARP-based discovery to discover a second device.
With Network Segment-based discovery, network device login settings must match login settings on IMC. With ARP-based discovery, only ARP settings must match.
With Network Segment-based discovery, network device SNMP settings must match SNMP settings on IM With ARP-based discovery, only ARP settings must match.
With Network Segment-based discovery, the administrator enters a range of IP addresses to discover. With ARP-based discovery, the administrator enters one seed IP address, and IMC dynamically learns more IP addresses to discover.

Answer(s): D

Reveal Solution Next Question

QUESTION: 14

Refer to the exhibit.

The exhibit shows partial output of the HP Comwaredisplay ip routing-table command. Note the Pre or preference column.
On an HP ProVision switch, what is the corresponding term used for the Pre column in the Comware output shown in the exhibit?

protocol ranking
administrative distance
cost
metric

Answer(s): B

Reveal Solution Next Question

QUESTION: 15

A server connects to a port on an HP Comware switch. The network administrator wants to ensure that:

- the port remains forwarding during Multiple Spanning Tree Protocol (MSTP) topology changes, and
- changes in the port status do not cause MSTP topology changes.

Which statement describes how the administrator can accomplish this?

The administrator must manually configure the port as an STP edge port.
The administrator can lower the port's root path cost to zero.
The administrator can accept the default behavior of auto-edge.
The administrator can configure the port as an MSTP master port.

Answer(s): B

Reveal Solution Next Question

HP HP0-Y52 Exam (page: 3) HP Applying FlexNetwork Fundamentals Updated on: 12-Feb-2026

QUESTION: 11

QUESTION: 12

QUESTION: 13

QUESTION: 14

QUESTION: 15

HP HP0-Y52 Exam (page: 3)
HP Applying FlexNetwork Fundamentals
Updated on: 12-Feb-2026