Google Professional Cloud Network Engineer PROFESSIONAL CLOUD NETWORK ENGINEER Dumps in PDF

Free Google PROFESSIONAL CLOUD NETWORK ENGINEER Real Questions (page: 2)

You have deployed a new internal application that provides HTTP and TFTP services to on-premises hosts. You want to be able to distribute traffic across multiple Compute Engine instances, but need to ensure that clients are sticky to a particular instance across both services.

Which session affinity should you choose?

  1. None
  2. Client IP
  3. Client IP and protocol
  4. Client IP, port and protocol

Answer(s): B



You created a new VPC network named Dev with a single subnet. You added a firewall rule for the network Dev to allow HTTP traffic only and enabled logging.
When you try to log in to an instance in the subnet via Remote Desktop Protocol, the login fails. You look for the Firewall rules logs in Stackdriver Logging, but you do not see any entries for blocked traffic. You want to see the logs for blocked traffic.

What should you do?

  1. Check the VPC flow logs for the instance.
  2. Try connecting to the instance via SSH, and check the logs.
  3. Create a new firewall rule to allow traffic from port 22, and enable logs.
  4. Create a new firewall rule with priority 65500 to deny all traffic, and enable logs.

Answer(s): D



You are trying to update firewall rules in a shared VPC for which you have been assigned only Network Admin permissions. You cannot modify the firewall rules. Your organization requires using the least privilege necessary.

Which level of permissions should you request?

  1. Security Admin privileges from the Shared VPC Admin.
  2. Service Project Admin privileges from the Shared VPC Admin.
  3. Shared VPC Admin privileges from the Organization Admin.
  4. Organization Admin privileges from the Organization Admin.

Answer(s): A


Reference:

https://cloud.google.com/vpc/docs/shared-vpc



You want to create a service in GCP using IPv6.

What should you do?

  1. Create the instance with the designated IPv6 address.
  2. Configure a TCP Proxy with the designated IPv6 address.
  3. Configure a global load balancer with the designated IPv6 address.
  4. Configure an internal load balancer with the designated IPv6 address.

Answer(s): C



You want to deploy a VPN Gateway to connect your on-premises network to GCP. You are using a non BGP- capable on-premises VPN device. You want to minimize downtime and operational overhead when your network grows. The device supports only IKEv2, and you want to follow Google-recommended practices.

What should you do?

  1. · Create a Cloud VPN instance.
    · Create a policy-based VPN tunnel per subnet.
    · Configure the appropriate local and remote traffic selectors to match your local and remote networks.
    · Create the appropriate static routes.
  2. · Create a Cloud VPN instance.
    · Create a policy-based VPN tunnel.
    · Configure the appropriate local and remote traffic selectors to match your local and remote networks.
    · Configure the appropriate static routes.
  3. · Create a Cloud VPN instance.
    · Create a route-based VPN tunnel.
    · Configure the appropriate local and remote traffic selectors to match your local and remote networks.
    · Configure the appropriate static routes.
  4. · Create a Cloud VPN instance.
    · Create a route-based VPN tunnel.
    · Configure the appropriate local and remote traffic selectors to 0.0.0.0/0.
    · Configure the appropriate static routes.

Answer(s): D


Reference:

https://cloud.google.com/vpn/docs/concepts/choosing-networks-routing



Your company just completed the acquisition of Altostrat (a current GCP customer). Each company has a separate organization in GCP and has implemented a custom DNS solution. Each organization will retain its current domain and host names until after a full transition and architectural review is done in one year. These are the assumptions for both GCP environments.

· Each organization has enabled full connectivity between all of its projects by using Shared VPC. · Both organizations strictly use the 10.0.0.0/8 address space for their instances, except for bastion hosts (for accessing the instances) and load balancers for serving web traffic. · There are no prefix overlaps between the two organizations. · Both organizations already have firewall rules that allow all inbound and outbound traffic from the 10.0.0.0/8 address space.

· Neither organization has Interconnects to their on-premises environment.

You want to integrate networking and DNS infrastructure of both organizations as quickly as possible and with minimal downtime.

Which two steps should you take? (Choose two.)

  1. Provision Cloud Interconnect to connect both organizations together.
  2. Set up some variant of DNS forwarding and zone transfers in each organization.
  3. Connect VPCs in both organizations using Cloud VPN together with Cloud Router.
  4. Use Cloud DNS to create A records of all VMs and resources across all projects in both organizations.
  5. Create a third organization with a new host project, and attach all projects from your company and Altostrat to it using shared VPC.

Answer(s): B,C



Your on-premises data center has 2 routers connected to your Google Cloud environment through a VPN on each router. All applications are working correctly; however, all of the traffic is passing across a single VPN instead of being load-balanced across the 2 connections as desired.

During troubleshooting you find:

· Each on-premises router is configured with a unique ASN.
· Each on-premises router is configured with the same routes and priorities. · Both on-premises routers are configured with a VPN connected to a single Cloud Router. · BGP sessions are established between both on-premises routers and the Cloud Router. · Only 1 of the on-premises router's routes are being added to the routing table.

What is the most likely cause of this problem?

  1. The on-premises routers are configured with the same routes.
  2. A firewall is blocking the traffic across the second VPN connection.
  3. You do not have a load balancer to load-balance the network traffic.
  4. The ASNs being used on the on-premises routers are different.

Answer(s): D



You have ordered Dedicated Interconnect in the GCP Console and need to give the Letter of Authorization/ Connecting Facility Assignment (LOA-CFA) to your cross-connect provider to complete the physical connection.

Which two actions can accomplish this? (Choose two.)

  1. Open a Cloud Support ticket under the Cloud Interconnect category.
  2. Download the LOA-CFA from the Hybrid Connectivity section of the GCP Console.
  3. Run gcloud compute interconnects describe <interconnect>.
  4. Check the email for the account of the NOC contact that you specified during the ordering process.
  5. Contact your cross-connect provider and inform them that Google automatically sent the LOA/CFA to them via email, and to complete the connection.

Answer(s): B,D



Share your comments for Google PROFESSIONAL CLOUD NETWORK ENGINEER exam with other users:

M
mohamed abdo
9/1/2023 4:59:00 AM

very useful

T
Tom
3/18/2022 8:00:00 PM

i purchased this exam dumps from another website with way more questions but they were all invalid and outdate. this exam dumps was right to the point and all from recent exam. it was a hard pass.

E
Edrick GOP
10/24/2023 6:00:00 AM

it was a good experience and i got 90% in the 200-901 exam.

A
anonymous
8/10/2023 2:28:00 AM

hi please upload this

B
Bakir
7/6/2023 7:24:00 AM

please upload it

A
Aman
6/18/2023 1:27:00 PM

really need this dump. can you please help.

N
Neela Para
1/8/2024 6:39:00 PM

really good and covers many areas explaining the answer.

K
Karan Patel
8/15/2023 12:51:00 AM

yes, can you please upload the exam?

N
NISHAD
11/7/2023 11:28:00 AM

how many questions are there in these dumps?

P
Pankaj
7/3/2023 3:57:00 AM

hi team, please upload this , i need it.

D
DN
9/4/2023 11:19:00 PM

question 14 - run terraform import: this is the recommended best practice for bringing manually created or destroyed resources under terraform management. you use terraform import to associate an existing resource with a terraform resource configuration. this ensures that terraform is aware of the resource, and you can subsequently manage it with terraform.

Z
Zhiguang
8/19/2023 11:37:00 PM

please upload dump. thanks in advance.

D
deedee
12/23/2023 5:51:00 PM

great great

A
Asad Khan
11/1/2023 3:10:00 AM

answer 16 should be b your organizational policies require you to use virtual machines directly

S
Sale Danasabe
10/24/2023 5:21:00 PM

the question are kind of tricky of you didnt get the hnag on it.

L
Luis
11/16/2023 1:39:00 PM

can anyone tell me if this is for rhel8 or rhel9?

H
hik
1/19/2024 1:47:00 PM

good content

B
Blessious Phiri
8/15/2023 2:18:00 PM

pdb and cdb are critical to the database

Z
Zuned
10/22/2023 4:39:00 AM

till 104 questions are free, lets see how it helps me in my exam today.

M
Muhammad Rawish Siddiqui
12/3/2023 12:11:00 PM

question # 56, answer is true not false.

A
Amaresh Vashishtha
8/27/2023 1:33:00 AM

i would be requiring dumps to prepare for certification exam

A
Asad
9/8/2023 1:01:00 AM

very helpful

B
Blessious Phiri
8/13/2023 3:10:00 PM

control file is the heart of rman backup

S
Senthil
9/19/2023 5:47:00 AM

hi could you please upload the ibm c2090-543 dumps

H
Harry
6/27/2023 7:20:00 AM

appriciate if you could upload this again

A
Anonymous
7/10/2023 4:10:00 AM

please upload the dump

R
Raja
6/20/2023 5:30:00 AM

i found some questions answers mismatch with explanation answers. please properly update

D
Doora
11/30/2023 4:20:00 AM

nothing to mention

D
deally
1/19/2024 3:41:00 PM

knowable questions

S
Sonia
7/23/2023 4:03:00 PM

very helpfull

B
binEY
10/6/2023 5:15:00 AM

good questions

N
Neha
9/28/2023 1:58:00 PM

its helpful

D
Desmond
1/5/2023 9:11:00 PM

i just took my oracle exam and let me tell you, this exam dumps was a lifesaver! without them, iam not sure i would have passed. the questions were tricky and the answers were obscure, but the exam dumps had everything i needed. i would recommend to anyone looking to pass their oracle exams with flying colors (and a little bit of cheating) lol.

D
Davidson OZ
9/9/2023 6:37:00 PM

22. if you need to make sure that one computer in your hot-spot network can access the internet without hot-spot authentication, which menu allows you to do this? answer is ip binding and not wall garden. wall garden allows specified websites to be accessed with users authentication to the hotspot

AI Tutor 👋 I’m here to help!