GED Essay Writing Exam GED-WRITING Dumps in PDF

Question 366:
Question 366 asks how to apply an Application Security Group (ASG1) to VM1. The key concept is that an ASG is attached to network interfaces, not directly to a VM.

• Correct answer: A. Associate NIC1 to ASG1
• Why: An ASG is used to group NICs so NSG rules can target the group. To apply ASG1 to VM1, you must attach VM1’s NIC (NIC1) to ASG1. Merely modifying the ASG’s properties or modifying NSG1 does not attach the VM’s NIC to the ASG.
• Why others are wrong:

• After associating NIC1 with ASG1, you can reference ASG1 in NSG rules as a source or destination to control traffic for VM1’s NIC. Example commands (CLI) or portal steps involve adding the NIC to the ASG.

Question 1:
Correct answer: Redeploy VM1 and VM2 to the same availability set.
Why:

• A Basic Load Balancer’s backend pool must consist of VMs that are in the same Availability Set. If VM1 and VM2 are in different AVSets (or one isn’t in an AVSet), you can’t add both to LB1’s backend pool. Redeploying/moving both VMs into the same Availability Set resolves this.
• If you needed cross-AVSet load balancing, you would use a Standard Load Balancer instead.

• Create or choose a single Availability Set.
• Move VM1 and VM2 into that AVSet.
• Add both VMs to LB1’s backend pool.

Question 1:
Here’s a targeted explanation of Question 1.

• The scenario: You’re deploying several new VMs on on-prem Hyper-V (Windows Server 2012 R2). You’ve got PowerShell scripts to configure VMs after deployment and want them to run automatically on each new VM.

• Options brief:

• Why A is the best choice here:

• Implementation tip:

Question 1:
The correct answer is C.
Why: In few-shot prompting, the value comes from high-quality, representative demonstrations. The examples should be diverse and typical of what the model will see in production, so the model learns the true input–label mapping and generalizes to unseen emails.
Why the other options are less appropriate:

• A: Using random, unrelated examples does not reflect the actual task distribution and won’t help the model generalize to real inputs.
• B: “Always use more than 10 examples” isn’t a universal rule; quantity without quality and relevance can add noise.
• D: Intentionally incorrect labels would mislead the model and degrade performance; you want correct, coherent mappings.

AWESOME and Thanku

Question 24:
Question 24 asks which three actions are needed to set up intercompany accounting between two legal entities.
The three correct actions are:

• A) Select intercompany journal names.
• C) Create intercompany main accounts to use for the due to and due from accounting entries.
• D) Define intercompany accounting setup by creating legal entity pairs defining originating and destination companies.

• D defines the actual pairing and direction (which entity is originating and which is destination). Without defined pairs, there is no enabled intercompany relationship.
• C establishes the main GL accounts used for the due-to and due-from postings between the entities, enabling correct cross-entity accounting and audit trails.
• A standardizes and identifies intercompany postings via dedicated journal names, aiding tracking and reporting.

• B (Configure intercompany accounting in both the originating and destination entities) is not listed as one of the three actions in this question’s solution.
• E (Configure intercompany accounting in the destination entity only) would be insufficient on its own.

Question 1:
The correct answer is Enabling team.

• In SAFe, enabling teams are designed to assist other teams by providing specialized capabilities, coaching, and help with adopting new technologies or practices. They focus on enabling proficiency across teams rather than delivering features themselves.
• Platform teams provide shared services across teams (not primarily about coaching on new tech).
• Stream-aligned teams are value-stream–oriented and deliver features to customers.
• Complicated subsystem teams handle a part of the system that requires deep expertise, but not primarily to uplift other teams’ capabilities.

Question 1:

• Answer: A

• Why: For a Snowball Edge data-transfer job, the device rental covers the use of the appliance for the initial 10-day period at no extra charge. After those 10 days, AWS charges a daily rental fee for continued use. Data transfer activities (in or out of the appliance) and ongoing use beyond the initial window typically incur separate charges, so options B, C, and D would involve costs. In short, the only option that’s free is using the appliance for the first 10 days.

Question 1:
The best solution is A: Configure a SetupComplete.cmd batch file in the %windir%\setup\scripts directory.
Why this is correct:

• SetupComplete.cmd runs automatically during Windows setup after OS deployment from a generalized image. When you create new VMs from that image, the script executes on first boot, applying your post-deployment configuration without requiring user interaction.
• This approach is appropriate for on-prem Hyper-V environments where you’re building and deploying VMs from a prepared image.

• B (logon scripts): Run only after a user logs on; not guaranteed for first boot or for machines without interactive logon.
• C (startup scripts via GPO): Can run at startup, but requires domain policy application and may run multiple times or fail if the machine isn’t in a ready state.
• D (place scripts in a new VHD): Not a scalable or automated method; requires manual steps and doesn’t ensure consistent execution on every new VM.

Question 9:
Question 9 asks about how GitHub Copilot identifies public code matches when the public code filter is on.

• Correct answer: A — Running code suggestions through filters designed to detect public code.

• Explanation: When the public code filter is enabled, Copilot analyzes each generated suggestion using filters that look for matches with publicly available code. This helps prevent output that might infringe copyright or licensing terms. The other options (B, C, D) describe methods that are not how the public code filter operates.

Question 2:
I can’t view the exhibit image, but this is the typical NetApp ONTAP behavior for Question 2.

• The correct answer is D: Add HOST 3's IP address to the NFS export policy.
• Why: NFS access is controlled by export-policy rules. If the new ESXi host’s IP isn’t listed in the NFS export policy, the host cannot mount the NFS datastore, even if the volume and LUN are configured correctly.
• Why the other options don’t solve it:

Question 23:
Question 23 describes a multimodal model where users can upload unsafe images that could contain hidden instructions. The goal is to implement controls to mitigate this risk.
Key points to understand

• Prompt shield for documents: Highly effective. It scans text extracted from inputs (including image text) before it’s sent to the LLM to catch hidden instructions or jailbreaking tries embedded in documents or image-derived text.
• Prompt shield for user prompts: Partially effective. It blocks direct jailbreak attempts written in the user’s prompt, but doesn’t catch everything, especially content coming from image text.
• Image moderation: Highly effective. Blocks unsafe or harmful images before they reach the model, preventing many attacks at the source.
• Protected Material Detection: Not helpful here. It’s designed to detect copyrighted material in outputs, not to protect against inputs that try to manipulate the model.

• The strongest defense is defense in depth: combine image moderation with both types of prompt shields. The document/text shield catches hidden instructions in extracted image text; the user-prompt shield mitigates jailbreak attempts in user-provided prompts; image moderation stops unsafe images before processing.

• The stated answer (A: “configure a prompt shield for user prompts”) would help, but it alone does not fully meet the goal. A more robust approach is to apply all three controls (document prompt shield, user prompt shield, and image moderation) to achieve stronger risk mitigation.

beautiful exams

You need to implement the date dimension in the data store. The solution must meet the technical requirements. What are two ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point. Populate the date dimension table by using a dataflow. Populate the date dimension table by using a Copy activity in a pipeline. Populate the date dimension view by using T-SQL. Populate the date dimension table by using a Stored procedure activity in a pipeline.Please answer

• The two correct options: A and D.

• Why:

• Note: B (Copy in a pipeline) would require a source, and C (date dimension view via T-SQL) is feasible but not selected here; the two stated options are the ones identified as correct for this question.

Question 14:

• Correct selections: B and E

• B. Admin access to the deployment pipeline: This gives the developers the ability to manage and run deployments within the pipeline, enabling them to deploy content to the Development and Test stages.
• E. Contributor access to the Development and Test workspaces: This level allows them to deploy items into the Development and Test workspaces as required, while preventing deployments to Production.

• If you also need the developers to view Production, grant them Viewer access to the Production workspace (not part of the two required options, but needed to satisfy the “view Production” requirement).

Question 5:
Question 5 asks how to identify min and max values for each column in a Dataflow result.
Correct options: B and E.

• B. Enable column profile: This turns on column profiling, which computes descriptive statistics for each column, including min and max values.
• E. Enable details pane: With the details pane enabled, you can view the per-column profile data (including min and max) when you select a column.

• A (Show column value distribution) is not required for min/max; it's for distribution histograms.
• C (Show column profile in details pane) is optional. If the details pane is already enabled (E) and column profiling is on (B), you can view the profile without explicitly enabling C.

Question 18:
Question 18: Why not A?

• The two recommended strategies are B and D (per the answer key):

• Why not A: A focuses on identifying the data to migrate and planning scripts for verifying data integrity. While important, it’s primarily a preparation/validation activity, not an active risk-mitigation step during the migration itself. The question asks for strategies that directly mitigate migration risks in practice, such as staged rollout (B) and thorough testing in a sandbox with real data (D). A does not address go-live risk, user adoption, or testing of the migration process in a controlled environment.

Question 4:
Question 4 is about when to use batch processing.

• Answer key: A (the option related to “When to use batch processing”).
• Core idea: Batch processing is used when you can tolerate some delay and don’t need results instantly. Data is collected over a period, then processed together in a batch.

• Latencies are expected with batch jobs. The system processes data in groups rather than as soon as data arrives.
• The processes are often not mission-critical at the exact moment they run, so delays don’t impact operations.

• Batch processing vs real-time processing: Batch processes collect data and run at scheduled times or when resources are available, whereas real-time processing handles data immediately.
• When to use batch processing:

Question 5:
I can’t see the [Image] in Question 5, but I can explain the likely reasoning.

• Correct components: SAS adapter and disk (options B and D).
• Why: This question is about diagnosing a storage-path issue inside the node. The SAS adapter connects disks to the controller, and the disks themselves are where I/O problems or failures usually originate. The cluster switches and network interface cards are more related to the network path rather than the direct storage path, unless the symptom points to a network fault.

• SAS adapter

• Disk

Question 12:
Here’s why Question 12’s correct choices are C and D.

• C (Azure DevOps, build and upload to asset library)

• D (Visual Studio, create deployment package and upload)

• A: Visual Studio export the project and upload to asset library

• B: Azure DevOps, queue a build and upload the model to the asset library

Question 3:
Question 3 asks for two valid ways to meet the purchase order creation validation (warn if the vendor is on the exclusion list for the customer/product and block/alert accordingly).
Correct answers: C and D

• C: In Application Explorer, create a form extension and implement validation.

• D: Implement Chain of Command (CoC) and method wrapping by creating a form extension class.

• A (class with a form data source event handler) is not the standard pattern for this UI-level validation scenario and is less direct for enforcing creation-time behavior.
• B (table extension with validation) cannot sufficiently enforce the UI-level workflow or trigger user-facing warnings during PO creation.

Question 12:
Here’s how to understand question 12.

• What the question asks: Two valid ways to prepare and deploy a software deployable package to a test environment (via the asset library in LCS).

• The correct options: C and D.

• Why A and B are not correct:

Question 6:
Here’s how question 6 works.
Key constraint: All new and extended objects must be in an existing model named FinanceExt. Creating a brand-new model is not allowed.
Why the two correct options work:

• B. Overlay the existing FinanceExt model and populate the solution definition.

• C. Extend the existing FinanceExt model and populate the project model definition.

• A. Create a new model that extends the existing FinanceExt model.

• D. Modify DefaultModelForNewProject and name the model FinanceExt.

Question 2:
I don’t have the text for Question 2 here. Please paste the exact Question 2 (including all answer choices) or describe the topic it covers.
Once I have it, I’ll:

• Identify the exam objective it targets.
• Break down the stem and each option.
• Use elimination and key concepts to justify why options are correct or incorrect.
• Give the final answer with a concise explanation of the reasoning.

Which statement is true about using default environment variables? The environment variables can be read in workflows using the ENV: variable_name syntax. The environment variables created should be prefixed with GITHUB_ to ensure they can be accessed in workflows The environment variables can be set in the defaults: sections of the workflow The GITHUB_WORKSPACE environment variable should be used to access files from within the runner.
Correct answer: The statement "The GITHUB_WORKSPACE environment variable should be used to access files from within the runner." is true.
Why the others are false:

• ENV: variable_name syntax is not how you read env vars in workflows. Use ${{ env.VARIABLE }} in expressions or $VARIABLE in a shell.
• Environment variables don’t need a GITHUB_ prefix. Custom vars can have any name; GITHUB_ is only for built-in, predefined vars.
• defaults: cannot set environment variables. It configures defaults for run steps (like shell or working-directory), not env vars.

• GITHUB_WORKSPACE (or ${{ github.workspace }}) is the root path on the runner where the repository is checked out. Use it to access files, e.g., $GITHUB_WORKSPACE/... or ${{ github.workspace }}/....

As an administrator for this subscription, you have been tasked with recommending a solution that prohibits users from copying corporate information from managed applications installed on unmanaged devices. Which of the following should you recommend? Windows Virtual Desktop. Microsoft Intune. Windows AutoPilot. Azure AD Application Proxy.

• Microsoft Intune

Question 34:

• Question 34 asks: Which role(s) has the capability to create Policies? Choose two.
• Likely correct roles: Compliance Manager and Compliance admin (A and B). These roles typically have policy governance rights to create and manage policies.
• Why not the others: Compliance User is usually a limited user, not allowed to create policies. Risk Manager focuses on risks, not policy creation in standard setups.
• Note on the provided key: The answer shown is “C” (Compliance User), which conflicts with “Choose two.” This is probably a key error. In practice, verify against your instance’s ACLs or official docs.
• Quick check tip: In ServiceNow, review the ACLs and role permissions for the Policy records to see which roles can create policies.

function of appnav in sdwan

• AppNav (Application Navigation) is the Cisco SD-WAN feature that provides application-level visibility and control.
• It maintains a catalog of applications (AppIDs) with attributes (ports/protocols, categories) and classifies traffic accordingly.
• It allows policy authors to reference apps by name in policies, enabling application-aware routing, QoS, and service chaining based on the app’s requirements.
• The SD-WAN fabric uses AppNav data to steer traffic along the best path, improving user experience for critical apps while optimizing WAN usage.

Question 1:

• Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

• Why this is correct

Question 5:

• Correct answer: A. User4 and User1 only

• Why this is correct:

• Quick tip for the exam:

Why this is correct

• Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

• Why this is correct:

Question 7:

• Correct answer: B — A risk score is computed based on the number of remediations needed compared to the industry peer average.

• Risk360 uses a remediation-based score. It benchmarks how many actions are required to fix issues against peers, giving a relative risk posture.
• Why not the others:

Question 104:

• Correct answer: D) Multi-Terabyte (TB) Range

• Brief explanation:

Q23: Fabric Admin is correct. Because Domain admin cannot create domains. Only Fabric Admin can among the given options. Q51: Wrapping @pipeline.parameter.param1 inside {} will return a string. But question requires the expression to return Int, so correct answer should be @pipeline.parameter.param1 (no {})