Why does the ISDB block layers 3 and 4 of the OSI model when applying content filtering? (Choose two.)
Answer(s): A,B
The Internet Service Database (ISDB) in FortiGate is used to enforce content filtering at Layer 3 (Network Layer) and Layer 4 (Transport Layer) of the OSI model by identifying applications based on their predefined IP addresses and ports.FortiGate has a predefined list of all IPs and ports for specific applications downloaded from FortiGuard:FortiGate retrieves and updates a predefined list of IPs and ports for different internet services from FortiGuard.This allows FortiGate to block specific services at Layer 3 and Layer 4 without requiring deep packet inspection.The ISDB blocks the IP addresses and ports of an application predefined by FortiGuard:ISDB works by matching traffic to known IP addresses and ports of categorized services. When an application or service is blocked, FortiGate prevents communication by denying traffic based on its destination IP and port number.
Refer to the exhibits.The Administrators section of a root FortiGate device and the Security Fabric Settings section of a downstream FortiGate device are shown.When prompted to sign in with Security Fabric in the downstream FortiGate device, a user enters the AdminSSO credentials.What is the next status for the user?
Answer(s): C
From the Root FortiGate - System Administrator Configuration exhibit:The AdminSSO account has the super_admin_readonly role.From the Downstream FortiGate - Security Fabric Settings exhibit:The Security Fabric role is set to Join Existing Fabric, meaning it will authenticate with the root FortiGate.SAML Single Sign-On (SSO) is enabled, and the default admin profile is set to super_admin_readonly.When the AdminSSO user logs into the downstream FortiGate using SSO, the authentication request is sent to the root FortiGate, where AdminSSO has super_admin_readonly permissions. Since the downstream FortiGate inherits this permission through the Security Fabric configuration, the user will be granted super_admin_readonly access.
A user reports that their computer was infected with malware after accessing a secured HTTPS website. However, when the administrator checks the FortiGate logs, they do not see that the website was detected as insecure despite having an SSL certificate and correct profiles applied on the policy.How can an administrator ensure that FortiGate can analyze encrypted HTTPS traffic on a website?
Answer(s): D
FortiGate, like other security appliances, cannot analyze encrypted HTTPS traffic unless it decrypts it first. If only certificate inspection is enabled, FortiGate can see the certificate details (such as the domain and issuer) but cannot inspect the actual web content.To fully analyze the traffic and detect potential malware threats:Full SSL inspection (Deep Packet Inspection) must be enabled in the SSL/SSH Inspection Profile. This allows FortiGate to decrypt the HTTPS traffic, inspect the content, and then re-encrypt it before forwarding it to the user.Without full SSL inspection, threats embedded in encrypted traffic may go undetected.
Refer to the exhibit, which shows an ADVPN network.The client behind Spoke-1 generates traffic to the device located behind Spoke-2. What is the first message that the hub sends to Spoke-1 to bring up the dynamic tunnel?
Answer(s): B
In an ADVPN (Auto-Discovery VPN) network, a dynamic VPN tunnel is established on-demand between spokes to optimize traffic flow and reduce latency.Process:1. Traffic Initiation:A client behind Spoke-1 sends traffic to a device behind Spoke-2.The traffic initially flows through the hub, following the pre-established overlay tunnel.2. Hub Detection:The hub detects that Spoke-1 is communicating with Spoke-2 and determines that a direct shortcut tunnel between the spokes can optimize the connection.3. Shortcut Offer:The hub sends a "Shortcut Offer" message to Spoke-1, informing it that a direct dynamic tunnel toSpoke-2 is possible.4. Tunnel Establishment:Spoke-1 and Spoke-2 then negotiate and establish a direct IPsec tunnel for communication.
What is the initial step performed by FortiGate when handling the first packets of a session?
When FortiGate processes the first packets of a session, it follows a sequence of steps to determine how the traffic should be handled before establishing a session. The initial step involves:Access Control List (ACL) checks: Determines if the traffic should be allowed or blocked based on predefined security rules.Hardware Packet Engine (HPE) inspections: Ensures that packet headers are valid and comply with protocol standards.IP Integrity Header Checking: Verifies if the IP headers are intact and not malformed or spoofed. Once these security inspections are completed and the session is validated, FortiGate then installs the session in hardware (if offloading is enabled) or processes it in software.
Share your comments for Fortinet FCSS_EFW_AD-7.4 exam with other users:
please upload dump, i have exam in 2 days
this is useful
question 232 answer should be perimeter not netowrk layer. wrong answer selected
nice questions
hi team, could you please provide this dump ?
very helpful to clear the exam and understand the concept.
i think it is great that you are helping people when they need it. thanks.
cannot evaluate yet
a laptops wireless antenna is most likely located in the bezel of the lid
good examplae to learn basic
this is useful information
looks usefull
question 81 should be c.
question 18 : response isnt a ?
plaese add questions
is dumps still valid ?
thanks for this
please upload questions
please upload the question dump for professional machinelearning
question 4 answer is c. this site shows the correct answer as b. "adopt a consumption model" is clearly a cost optimization design principle. looks like im done using this site to study!!!
number 52 answer is d
just started preparing for my exam , and this site is so much help
question 35 is incorrect, the correct answer is c, it even states so: explanation: when a vm is infected with ransomware, you should not restore the vm to the infected vm. this is because the ransomware will still be present on the vm, and it will encrypt the files again. you should also not restore the vm to any vm within the companys subscription. this is because the ransomware could spread to other vms in the subscription. the best way to restore a vm that is infected with ransomware is to restore it to a new azure vm. this will ensure that the ransomware is not present on the new vm.
i would like to take psm1 exam.
cbd and pdb are key to the database
the purchase and download process is very much streamlined. the xengine application is very nice and user-friendly but there is always room for improvement.
please upload p_sapea_2023
anyone use this? the question dont seem to follow other formats and terminology i have been studying im getting worried
good questions
hello are these questions valid for ms-102
some questions are wrongly answered but its good nonetheless
how to get system serial number using intune
is it really helpful to pass the exam
#229 in incorrect - all the customers require an annual review
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your FCSS_EFW_AD-7.4, please sign in or create a free account.