Fortinet FCP - FortiAnalyzer 7.4 Administrator FCP_FAZ_AD-7.4 Dumps in PDF

Free Fortinet FCP_FAZ_AD-7.4 Real Questions (page: 4)

What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?

  1. There is no need to do anything because the disk will self-recover.
  2. Run execute format disk to format and restart the FortiAnalyzer device.
  3. Perform a hot swap of the disk.
  4. Shut down FortiAnalyzer and replace the disk.

Answer(s): C

Explanation:

In a RAID configuration, especially when hot-swapping is supported, you can replace a failed disk without shutting down the device. The RAID array will automatically rebuild once the new disk is inserted, minimizing downtime and maintaining data integrity.



An administrator has configured the following settings:



What is the purpose of executing these commands?

  1. To record the hash value and authentication code of log files.
  2. To encrypt log transfer between FortiAnalyzer and other devices.
  3. To create the secure channel used by the OFTP process.
  4. To verify the integrity of the log files received.

Answer(s): A

Explanation:

The command set log-checksum md5-auth configures FortiAnalyzer to generate an MD5 hash for each log file, along with an authentication code. This ensures that the integrity of the logs can be verified, confirming that the logs have not been tampered with.



Which statement correctly describes RAID 10 (1+0) on FortiAnalyzer?

  1. A configuration with four disks, each with 2 TB of capacity, provides a total space of 4 TB.
    B 11 combines mirroring striping and distributed parity to provide performance and fault tolerance
  2. A configuration with four disks, each with 2 TB of capacity, provides a total space of 2 T
  3. It uses striping to provide performance and fault tolerance.

Answer(s): A

Explanation:

RAID 10 combines mirroring (RAID 1) and striping (RAID 0). In a RAID 10 setup with four disks, data is mirrored across two pairs of disks, and those pairs are striped for performance. This results in improved performance and fault tolerance, but the total usable storage is 50% of the total raw storage, meaning four 2 TB disks provide 4 TB of usable space.



Refer to the exhibit, which shows the HA configuration settings of a FortiAnalyzer device.



The administrator wants to join this FortiAnalyzer to an existing HA cluster.
What can you conclude from the configuration displayed?

  1. After joining the cluster, this FortiAnalyzer will forward received logs to its peers.
  2. This FortiAnalyzer will trigger a failover after losing communication with its peers for 10 seconds.
  3. This FortiAnalyzer is configured to route HA traffic through a gateway.
  4. This FortiAnalyzer will join the existing HA cluster as the secondary.

Answer(s): B

Explanation:

The "Preferred Role" is set to Secondary, which means this FortiAnalyzer is configured to join the cluster as the secondary unit in an Active-Passive HA configuration. Other settings, such as the peer IP and serial number, confirm its setup to communicate with the primary unit.



Which two parameters impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)

  1. Total quota
  2. License type
  3. RAID level
  4. Disk size

Answer(s): C

Explanation:

RAID level affects how much disk space is reserved for redundancy and fault tolerance. For example, RAID 1 mirrors data, meaning you need more space for redundancy, while RAID 5 or RAID 6 reserves space for parity.

Disk size directly influences the total available and reserved space since the larger the disk, the more space may need to be reserved for system functions, logs, and other operations.

The total quota and license type do not directly impact the reserved disk space, though they do influence other aspects of capacity and functionality.



Share your comments for Fortinet FCP_FAZ_AD-7.4 exam with other users:

D
Divya
8/27/2023 12:31:00 PM

all the best

K
KY
1/1/2024 11:01:00 PM

very usefull document

A
Arun
9/20/2023 4:52:00 PM

nice and helpful questions

J
Joseph J
7/11/2023 2:53:00 PM

i found the questions helpful

M
Meg
10/12/2023 8:02:00 AM

q 105 . ans is d

N
Navaneeth S
7/14/2023 7:57:00 AM

i have interest to get a sybase iq dba certification

A
Aish
10/11/2023 5:27:00 AM

want to pass exm.

A
Anonymous
6/12/2023 7:23:00 AM

are the answers correct?

K
Kris
7/7/2023 9:43:00 AM

good morning, could you please upload this exam again, i need it to test my knowledge in sd-wan with version 7.0.

M
Meghraj mali
10/7/2023 1:47:00 PM

very nice question

N
Noel
11/1/2022 9:14:00 PM

i have learning disability and this exam dumps allowed me to focus on the actual questions and not worry about notes and the those other study materials.

J
Jas
10/25/2023 6:01:00 PM

165 should be apt

N
Neetu
6/22/2023 8:41:00 AM

please upload the dumps, real need of them

M
Mark
10/24/2023 1:34:00 AM

any recent feeedback?

G
Gopinadh
8/9/2023 4:05:00 AM

question number 2 is indicating you are giving proper questions. observe and change properly.

S
Santhi
1/1/2024 8:23:00 AM

passed today.40% questions were new.litwere case study,lots of new questions on afd,ratelimit,tm,lb,app gatway.got 2 set series of questions which are not present here.questions on azure cyclecloud, no.of vnet/vms required for implimentation,blueprints assignment/management group etc

R
Raviraj Magadum
1/12/2024 11:39:00 AM

practice test

S
sivaramakrishnan
7/27/2023 8:12:00 AM

want the dumps for emc content management server programming(cmsp)

A
Aderonke
10/23/2023 1:52:00 PM

brilliant and helpful

A
Az
9/16/2023 2:43:00 PM

q75. azure files is pass

K
ketty
11/9/2023 8:10:00 AM

very helpful

S
Sonail
5/2/2022 1:36:00 PM

thank you for these questions. it helped a lot.

S
Shariq
7/28/2023 8:00:00 AM

how do i get the h12-724 dumps

A
adi
10/30/2023 11:51:00 PM

nice data dumps

E
EDITH NCUBE
7/25/2023 7:28:00 AM

answers are correct

R
Raja
6/20/2023 4:38:00 AM

good explanation

B
BigMouthDog
1/22/2022 8:17:00 PM

hi team just want to know if there is any update version of the exam 350-401

F
francesco
10/30/2023 11:08:00 AM

helpful on 2017 scrum guide

A
Amitabha Roy
10/5/2023 3:16:00 AM

planning to attempt for the exam.

P
Prem Yadav
7/29/2023 6:20:00 AM

pleaseee upload

A
Ahmed Hashi
7/6/2023 5:40:00 PM

thanks ly so i have information cia

M
mansi
5/31/2023 7:58:00 AM

hello team, i need sap qm dumps for practice

J
Jamil aljamil
12/4/2023 4:47:00 AM

it’s good but not senatios based

C
Cath
10/10/2023 10:19:00 AM

q.119 - the correct answer is b - they are not captured in an update set as theyre data.

AI Tutor 👋 I’m here to help!