EXIN CDCS Dumps PDF Free Download - Page: 6

QUESTION: 6

A new network storage device in a non-standard size rack of approximately 600 kg/1,300 lbs is going to be installed in the data center.
Are new floor loading calculations required?

No, as long as the equipment is less than 700 kg/1,500 lbs it will be within the limits.
No, specifications of equipment brought into the data center will already be known during the design of the data center, and therefore the floor will be able to handle it.
Yes, additional floor loading calculations need to be done by the floor manager, which should be verified by the safety engineer.
Yes, a structural engineer, approved/endorsed by the building owner, should carry out new floor loading calculations.

Answer(s): D

Explanation:

For heavy equipment, such as a network storage device weighing approximately 600 kg/1,300 lbs, new floor loading calculations are indeed required, particularly since the rack is non-standard. A structural engineer, approved by the building owner, should conduct these calculations to ensure the floor can safely support the new load without risking structural integrity.
Detailed
Data centers are designed with specific floor load ratings, which are determined during the design phase based on anticipated equipment.
When adding or replacing equipment that is significantly heavy or non-standard, reassessing the floor's capacity is essential to avoid overloading. A structural engineer has the expertise to verify if the existing floor can accommodate the weight and, if not, can recommend reinforcement measures.

This step ensures compliance with safety standards and helps prevent damage to the infrastructure, which could lead to costly repairs or even catastrophic failure in extreme cases.
EPI Data Center Specialist

Reference:

EPI Data Center Specialist training advises that any changes in the data center load, particularly involving non-standard and heavy equipment, warrant a structural assessment. Ensuring compliance with floor load capacity is a critical safety and operational concern, as underscoring data center infrastructure reliability and safety is a priority in EPI's best practices.

Reveal Solution Next Question

QUESTION: 7

A data center has its own power supply from the public utility and receives chilled water supply from the building owner.
What needs to be taken into consideration when calculating the PUE?

Nothing, as the chiller plant in the building also uses electrical power
You will need to take the value for COP of the chiller plant into consideration
You will need to take a weight factor of 0.4 for district chilled water into consideration
PUE calculations are not possible in shared buildings

Answer(s): C

Explanation:

When calculating Power Usage Effectiveness (PUE) in a data center that uses chilled water from an external source, like from a building owner, a weight factor for district chilled water must be applied. This is because PUE calculations aim to measure the energy efficiency of the data center's own operations, and external utilities like district chilled water aren't directly powered by the data center. A weight factor of 0.4 is typically used to account for the energy consumed to produce and deliver the chilled water, reflecting the indirect impact on the data center's total energy consumption.
Detailed
PUE is calculated as the ratio of the total facility energy to the IT equipment energy. If the cooling is provided by an external chilled water source, it's necessary to adjust the calculations to accurately reflect the energy impact. By incorporating the 0.4 weight factor, data centers can calculate a more accurate PUE, aligning with standard methods and industry best practices.
EPI Data Center Specialist

Reference:

EPI training on PUE highlights the importance of adjusting for external energy sources, such as district cooling, in the calculations. This ensures that PUE values remain accurate and comparable across different data centers, even when external utilities are used.

Reveal Solution Next Question

QUESTION: 8

What is the main reason to install Earth Leakage protection?

Protection of ICT equipment against high-frequency noise currents
Protection of human lives
Improvement of the data center grounding/earthing system
Protection against lightning strikes

Answer(s): B

Explanation:

Earth Leakage Protection is primarily installed to protect human lives by detecting and disconnecting power when a fault current flows to the ground. This type of protection is essential to avoid electrical shock hazards that could occur when insulation fails, or equipment is improperly grounded.
Detailed
Earth leakage currents can occur due to insulation faults or accidental contact with live parts. Earth Leakage Protection systems, such as Residual Current Devices (RCDs), quickly detect these faults and disconnect the circuit to prevent harm to personnel. This is especially crucial in environments like data centers where high-powered equipment is continuously running and any electrical fault can pose significant safety risks.
EPI Data Center Specialist

Reference:

EPI emphasizes that human safety is paramount in data center operations. Proper grounding and leakage protection are fundamental safety measures, and EPI guidelines align with this focus, underscoring the importance of protecting personnel from electrical hazards through appropriate safety systems.

Reveal Solution Next Question

QUESTION: 9

The noise levels in the data center are approximately 91 dB (A).
Do employers need to take precautions?

No, anything less than 100 dB (A) is acceptable.
There are no regulations regarding noise levels inside a building. Regulations only apply to noise pollution outside of the building.
As long as the data is compliant to ISO/IEC 27001 it is acceptable.
Yes, since it is mandated by regulations.

Answer(s): D

Explanation:

In a data center with noise levels of 91 dB (A), employers are indeed required to take precautions to protect personnel, as this level exceeds commonly accepted safety thresholds for occupational noise exposure. Regulations, such as those from the Occupational Safety and Health Administration (OSHA) or similar agencies, mandate specific controls and protections for environments with high noise levels.

Detailed
Noise levels above 85 dB (A) typically trigger requirements for hearing conservation programs. At 91 dB (A), steps like providing ear protection, conducting regular noise assessments, and possibly implementing engineering controls to reduce noise should be taken. Extended exposure to such levels can lead to hearing loss, so regulatory compliance ensures both immediate and long-term protection for personnel.

EPI Data Center Specialist

Reference:

EPI guidelines for data center safety address noise exposure as part of the environmental safety measures. EPI recommends adhering to local occupational health regulations, as excessive noise can harm personnel and affect operational efficiency due to potential health hazards.

Reveal Solution Next Question

QUESTION: 10

The UPS of a data center, with an ANSI/TIA-942 Rating-4, is installed with the rectifier connected to power feed A and the bypass/reserve line input connected to power feed B. To which feed will the output of the UPS be synchronized?

The UPS will not synchronize to any of the feeds but use an internal clock to set the output voltage and frequency
Depends on the setting of the UPS, as the UPS can normally be set to either feed
Feed A
Feed B

Answer(s): B

Explanation:

For a UPS system in a Rating-4 data center, the synchronization of output can indeed depend on the specific settings of the UPS. Generally, such systems allow for flexible configuration where the output can be synchronized to either power feed A or B, depending on which feed is preferred for stability or redundancy purposes.
Detailed
In dual-feed setups, such as those in high-redundancy data centers, the UPS can be set to synchronize with either feed. This ensures that the UPS maintains continuity in case one feed becomes unstable or fails. The flexibility to choose synchronization to either feed enhances the resiliency and reliability of power supply, which is critical in Tier IV (Rating-4) facilities where uptime is paramount.
EPI Data Center Specialist

Reference:

The EPI Data Center Specialist course underscores the importance of configurable UPS systems in Rating-4 data centers, where redundancy and continuous power are critical. By allowing synchronization to either feed, the UPS can maintain the highest level of reliability, which aligns with the rigorous standards expected in such environments.

Reveal Solution Next Question

EXIN EPI Certified Data Centre Specialist CDCS Dumps in PDF

Free EXIN CDCS Real Questions (page: 6)

QUESTION: 6

Explanation:

Reference:

QUESTION: 7

Explanation:

Reference:

QUESTION: 8

Explanation:

Reference:

QUESTION: 9

Explanation:

Reference:

QUESTION: 10

Explanation:

Reference: