312-38 Exam Questions and Answers | Exam-Dumps (Page: 7)

QUESTION: 31

Which of the following devices allows wireless communication devices to connect to a wireless network using Wi-Fi, Bluetooth, or related standards?

Express card
WAP
WNIC
Wireless repeater
None

Answer(s): B

Explanation:

A wireless access point (WAP) is a device that allows wireless communication devices to connect to a wireless network using Wi-Fi, Bluetooth, or related standards. The WAP usually connects to a wired network, and it can transmit data between wireless devices and wired devices on the network. Each access point can serve multiple users within a defined network area. As people move beyond the range of one access point, they are automatically handed over to the next one. A small WLAN requires a single access point. The number of access points in a network depends on the number of network users and the physical size of the network.
Answer option C is incorrect. A wireless network interface card (WNIC) is a network card that connects to a radio-based computer network, unlike a regular network interface controller (NIC) that connects to a wire-based network such as token ring or ethernet. A WNIC, just like a NIC, works on the Layer 1 and Layer 2 of the OSI Model. A WNIC is an essential component for wireless desktop computer. This card uses an antenna to communicate through microwaves. A WNIC in a desktop computer is usually connected using the PCI bus.
Answer option A is incorrect. ExpressCard, a new standard introduced by PCMCIA, is a thinner, faster, and lighter modular expansion for desktops and laptops. Users can add memory, wired or wireless communication cards, and security devices by inserting these modules into their computers. ExpressCard slots are designed to accommodate modules that use either Universal Serial Bus (USB) 2.0 or the PCI Express standard.
ExpressCard modules are available in two sizes, i.e., 34 mm wide (ExpressCard/34) and 54 mm wide (ExpressCard/54). Both modules are 75 mm long and 5 mm high. An ExpressCard/34 module can be inserted in either a 54 mm slot or a 34 mm slot, but an ExpressCard/54 requires a Universal (54 mm) slot. However, an extender can be used with ExpressCard/34 slot to connect the ExpressCard/54 module from outside of the computer. Both the modules are identical in performance. They take full advantage of the features of the PCI Express or USB 2.0 interfaces. The only difference between them is that the ExpressCard/54 form-factor, due to its larger surface area, allows for greater thermal dissipation than does an ExpressCard/34. As the performance does not vary with module size, module developers usually prefer to fit their applications into the smaller ExpressCard/34 form factor. But some applications, such as SmartCard readers, and CompactFlash readers, require the extra width of an ExpressCard/54 module.
Answer option D is incorrect. A wireless repeater is a networking device that works as a repeater between a wireless router and computers. It is used to connect a client to the network when the client is out of the service area of the access point. If the wireless repeater is configured properly, it extends the range of the wireless LAN network.

Reveal Solution Next Question

QUESTION: 32

Which of the following protocols uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets?

PPTP
ESP
LWAPP
SSTP

Answer(s): A

Explanation:

The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks. PPTP uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets. The PPTP specification does not describe encryption or authentication features and relies on the PPP protocol being tunneled to implement security functionality. However, the most common PPTP implementation, shipping with the Microsoft Windows product families, implements various levels of authentication and encryption natively as standard features of the Windows PPTP stack. The intended use of this protocol is to provide similar levels of security and remote access as typical VPN products.
Answer option B is incorrect. Encapsulating Security Payload (ESP) is an IPSec protocol that provides confidentiality, in addition to authentication, integrity, and anti-replay. ESP can be used alone or in combination with Authentication Header (AH). It can also be nested with the Layer Two Tunneling Protocol (L2TP). ESP does not sign the entire packet unless it is being tunneled. Usually, only the data payload is protected, not the IP header.
Answer option D is incorrect. Secure Socket Tunneling Protocol (SSTP) is a form of VPN tunnel that provides a mechanism to transport PPP or L2TP traffic through an SSL 3.0 channel. SSL provides transport-level security with key-negotiation, encryption, and traffic integrity checking. The use of SSL over TCP port 443 allows SSTP to pass through virtually all firewalls and proxy servers. SSTP servers must be authenticated during the SSL phase. SSTP clients can optionally be authenticated during the SSL phase, and must be authenticated in the PPP phase. The use of PPP allows support for common authentication methods, such as EAP-TLS and MS- CHAP. SSTP is available in Windows Server 2008, Windows Vista SP1, and later operating systems. It is fully integrated with the RRAS architecture in these operating systems, allowing its use with Winlogon or smart card authentication, remote access policies, and the Windows VPN client.
Answer option C is incorrect. LWAPP (Lightweight Access Point Protocol) is a protocol used to control multiple Wi-Fi wireless access points at once. This can reduce the amount of time spent on configuring, monitoring, or troubleshooting a large network. This also allows network administrators to closely analyze the network.

Reveal Solution Next Question

QUESTION: 33

Which of the following procedures is designed to enable security personnel to identify, mitigate, and recover from malicious computer incidents, such as unauthorized access to a system or data, denial-of-service, or unauthorized changes to system hardware, software, or data?

Cyber Incident Response Plan
Crisis Communication Plan
Disaster Recovery Plan
Occupant Emergency Plan

Answer(s): A

Explanation:

The Cyber Incident Response Plan is used to address cyber attacks against an organization's IT system through various procedures. These procedures enable security personnel to identify, mitigate, and recover from malicious computer incidents, such as denial-of-service attacks, unauthorized accessing of a system or data, or unauthorized changes to system hardware, software, or data.
Answer option C is incorrect. A disaster recovery plan should contain data, hardware, and software that can be critical for a business. It should also include the plan for sudden loss such as hard disc crash. The business should use backup and data recovery utilities to limit the loss of data.
Answer option D is incorrect. The Occupant Emergency Plan (OEP) is used to reduce the risk to personnel, property, and other assets while minimizing work disorders in the event of an emergency. It is the response procedure for occupants of a facility on the occurrence of a situation, which is posing a potential threat to the health and safety of personnel, the environment, or property. OEPs are developed at the facility level, specific to the geographic site and structural design of the building.
Answer option B is incorrect. The crisis communication plan can be broadly defined as the plan for the exchange of information before, during, or after a crisis event. It is considered as a sub-specialty of the public relations profession that is designed to protect and defend an individual, company, or organization facing a public challenge to its reputation. The aim of crisis communication plan is to assist organizations to achieve continuity of critical business processes and information flows under crisis, disaster or event driven circumstances.

Reveal Solution Next Question

QUESTION: 34

Which of the following TCP commands are used to allocate a receiving buffer associated with the specified connection?

Send
Close
None
Receive
Interrupt

Answer(s): D

Explanation:

The Receive command is used to allocate a receiving buffer associated with the specified connection. An error is returned if no OPEN precedes this command or the calling process is not authorized to use this connection. Answer option A is incorrect. The Send command causes the data contained in the indicated user buffer to be sent to the indicated connection.
Answer option C is incorrect. The Abort command causes all pending SENDs and RECEIVES to be aborted. Answer option B is incorrect. The Close command causes the connection specified to be closed.

Reveal Solution Next Question

QUESTION: 35

You work as a professional Computer Hacking Forensic Investigator for DataEnet Inc. You want to investigate e-mail information of an employee of the company. The suspected employee is using an online e-mail system such as Hotmail or Yahoo. Which of the following folders on the local computer will you review to accomplish the task? Each correct answer represents a complete solution. Choose all that apply.

History folder
Temporary Internet Folder
Cookies folder
Download folder

Answer(s): A,B,C

Explanation:

Online e-mail systems such as Hotmail and Yahoo leave files containing e-mail message information on the local computer. These files are stored in a number of folders, which are as follows:
Cookies folder Temp folder History folder Cache folder
Temporary Internet Folder Forensic tools can recover these folders for the respective e-mail clients. When folders are retrieved, e-mail files can be accessed. If the data is not readable, various tools are available to decrypt the information such as a cookie reader used with cookies.
Answer option D is incorrect. Download folder does not contain any e-mail message information.

Reveal Solution Next Question

EC-Council 312-38 Exam (page: 7) EC-Council Certified Network Defender Updated on: 09-Feb-2026

QUESTION: 31

Explanation:

QUESTION: 32

Explanation:

QUESTION: 33

Explanation:

QUESTION: 34

Explanation:

QUESTION: 35

Explanation:

EC-Council 312-38 Exam (page: 7)
EC-Council Certified Network Defender
Updated on: 09-Feb-2026