Dell D-VXB-DY-A-24 Exam (page: 1)
Dell VxBlock Deploy Achievement
Updated on: 12-Feb-2026

Viewing Page 1 of 17

What is the responsibility of the Implementation Specialist during the deployment cycle?

  1. Physically uncrate VxBlock racks and acclimatize
  2. Perform inter-rack cabling
  3. Execute test plan and validation
  4. Create the Site and Logical Configuration Surveys

Answer(s): C

Explanation:

Locate the validation procedures and support documentation: The Implementation Specialist must locate the necessary validation procedures and support documentation that are essential for the deployment of the VxBlock Systems.
Connect the VxBlock System to the customer network: After locating the documentation, the specialist is responsible for connecting the VxBlock System to the customer's network. Validate a VxBlock 1000 installation using the LCS and Test Plan: The specialist must validate the VxBlock 1000 installation using the Lifecycle System (LCS) and the Test Plan to ensure that the system is correctly implemented and functioning as intended. Describe how to perform knowledge transfers: Part of the specialist's role is to describe the process of knowledge transfer, ensuring that the customer's staff is adequately trained and informed about the system.



A System Engineer is validating system cabling for a VxBlock 1000. They find that some ports on Fabric Interconnects 1A are not connected.

Which connections are missing?

  1. Network uplinks to Nexus switches
  2. Network uplinks to the customer network
  3. SAN uplinks to MDS switches
  4. Server uplinks to C-Series servers

Answer(s): D

Explanation:

Review the VxBlock 1000 documentation: The System Engineer should review the VxBlock 1000 documentation to understand the standard cabling configuration for Fabric Interconnects. Identify the role of Fabric Interconnects 1A: Fabric Interconnects serve as the nerve center for data and storage networking in the VxBlock 1000. They manage the connectivity between the compute, storage, and networks.
Determine the standard connection setup: Typically, Fabric Interconnects 1A would have server uplinks connected to the C-Series servers to manage data traffic between servers and the rest of the network.
Validate against the deployment checklist: The System Engineer should validate the cabling against the deployment checklist provided in the VxBlock Deploy Achievement document to ensure all connections are correctly made.



What is needed to provide network isolation between vSwitch port groups?

  1. Uplink port
  2. Separate VLAN IDs
  3. VMKernel port
  4. Shared VLAN ID

Answer(s): B

Explanation:

Understand the role of VLANs: VLANs (Virtual Local Area Networks) are used to segment network traffic. They provide isolation between network segments at the data link layer (Layer 2) of the OSI model.
Identify the need for isolation: vSwitch port groups are used to segregate network traffic for different virtual machines or services. To ensure that each port group's traffic is isolated from the others, separate VLAN IDs are assigned.
Assign unique VLAN IDs: Each vSwitch port group should be assigned a unique VLAN ID to maintain network isolation. This prevents traffic from one port group from being accessible to another. Configure the physical switch ports: The physical switch ports that the vSwitch is connected to must be configured to recognize the VLAN IDs used by the vSwitch port groups. Validate the configuration: After configuring VLAN IDs, it's important to validate the configuration to ensure that the network isolation is functioning as intended.



What is used to collect VxBlock component information during an RCM Assessment?

  1. VMware vRealize Operations
  2. VMware Configuration Automation Tool
  3. Dell EMC SCR
  4. Element Manager

Answer(s): D

Explanation:

During an RCM (Release Certification Matrix) Assessment for VxBlock, the Element Manager is used to collect component information. Element Managers are specialized tools designed to gather detailed data and status information from individual components within the VxBlock system. These tools provide granular insights into the configuration and health of the system, facilitating the RCM assessment process.


Reference:

Dell EMC VxBlock System documentation.
Industry best practices for system assessments and management.



A VxBlock 1000 is running VMware vSphere 6.7. To support an audit, a customer engineer is trying to map the networking components in the VxBlock to a traditional datacenter architecture.

Which component should the engineer map to the access switch?

  1. VMware virtual distributed switch
  2. Fabric Interconnect
  3. Nexus 1000V switch
  4. Nexus 9306PX switch

Answer(s): B

Explanation:

In a VxBlock 1000 system running VMware vSphere 6.7, the Fabric Interconnect should be mapped to the access switch in a traditional data center architecture. The Fabric Interconnect is responsible for aggregating traffic from the servers before it is sent to the upstream network, functioning similarly to an access switch which connects end devices to the broader network infrastructure.


Reference:

Dell EMC VxBlock System architecture guides.
Cisco Unified Computing System (UCS) documentation, as Fabric Interconnects are commonly used in UCS environments.



Viewing Page 1 of 17



Share your comments for Dell D-VXB-DY-A-24 exam with other users:

TS 7/18/2023 3:32:00 PM

good knowledge
Anonymous


Asad Khan 11/1/2023 2:44:00 AM

answer 10 should be a because only a new project will be created & the organization is the same.
Anonymous


Raj 9/12/2023 3:49:00 PM

can you please upload the dump again
UNITED STATES


Christian Klein 6/23/2023 1:32:00 PM

is it legit questions from sap certifications ?
UNITED STATES


anonymous 1/12/2024 3:34:00 PM

question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).
UNITED STATES


NSPK 1/18/2024 10:26:00 AM

q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save
Anonymous


mohamed abdo 9/1/2023 4:59:00 AM

very useful
Anonymous


Tom 3/18/2022 8:00:00 PM

i purchased this exam dumps from another website with way more questions but they were all invalid and outdate. this exam dumps was right to the point and all from recent exam. it was a hard pass.
UNITED KINGDOM


Edrick GOP 10/24/2023 6:00:00 AM

it was a good experience and i got 90% in the 200-901 exam.
Anonymous


anonymous 8/10/2023 2:28:00 AM

hi please upload this
Anonymous


Bakir 7/6/2023 7:24:00 AM

please upload it
UNITED KINGDOM


Aman 6/18/2023 1:27:00 PM

really need this dump. can you please help.
UNITED KINGDOM


Neela Para 1/8/2024 6:39:00 PM

really good and covers many areas explaining the answer.
NEW ZEALAND


Karan Patel 8/15/2023 12:51:00 AM

yes, can you please upload the exam?
UNITED STATES


NISHAD 11/7/2023 11:28:00 AM

how many questions are there in these dumps?
UNITED STATES


Pankaj 7/3/2023 3:57:00 AM

hi team, please upload this , i need it.
UNITED STATES


DN 9/4/2023 11:19:00 PM

question 14 - run terraform import: this is the recommended best practice for bringing manually created or destroyed resources under terraform management. you use terraform import to associate an existing resource with a terraform resource configuration. this ensures that terraform is aware of the resource, and you can subsequently manage it with terraform.
Anonymous


Zhiguang 8/19/2023 11:37:00 PM

please upload dump. thanks in advance.
Anonymous


deedee 12/23/2023 5:51:00 PM

great great
UNITED STATES


Asad Khan 11/1/2023 3:10:00 AM

answer 16 should be b your organizational policies require you to use virtual machines directly
Anonymous


Sale Danasabe 10/24/2023 5:21:00 PM

the question are kind of tricky of you didnt get the hnag on it.
Anonymous


Luis 11/16/2023 1:39:00 PM

can anyone tell me if this is for rhel8 or rhel9?
UNITED STATES


hik 1/19/2024 1:47:00 PM

good content
UNITED STATES


Blessious Phiri 8/15/2023 2:18:00 PM

pdb and cdb are critical to the database
Anonymous


Zuned 10/22/2023 4:39:00 AM

till 104 questions are free, lets see how it helps me in my exam today.
UNITED STATES


Muhammad Rawish Siddiqui 12/3/2023 12:11:00 PM

question # 56, answer is true not false.
SAUDI ARABIA


Amaresh Vashishtha 8/27/2023 1:33:00 AM

i would be requiring dumps to prepare for certification exam
Anonymous


Asad 9/8/2023 1:01:00 AM

very helpful
PAKISTAN


Blessious Phiri 8/13/2023 3:10:00 PM

control file is the heart of rman backup
Anonymous


Senthil 9/19/2023 5:47:00 AM

hi could you please upload the ibm c2090-543 dumps
Anonymous


Harry 6/27/2023 7:20:00 AM

appriciate if you could upload this again
AUSTRALIA


Anonymous 7/10/2023 4:10:00 AM

please upload the dump
SWEDEN


Raja 6/20/2023 5:30:00 AM

i found some questions answers mismatch with explanation answers. please properly update
UNITED STATES


Doora 11/30/2023 4:20:00 AM

nothing to mention
Anonymous