Dell OpenManage Operate Achievement D-OME-OE-A-24 Dumps in PDF

Free Dell D-OME-OE-A-24 Real Questions (page: 10)

What is the recommended frequency for running Discovery tasks in an OpenManage Enterprise environment with frequent network changes?

  1. Once per hour
  2. Once per week
  3. Once per day
  4. Manually as needed

Answer(s): C

Explanation:

In an OpenManage Enterprise environment that experiences frequent network changes, it is recommended to run Discovery tasks once per day. This frequency ensures that the inventory of devices is kept up-to-date without causing excessive network traffic that could disrupt operations. The rationale for this recommendation is as follows:
Frequent Network Changes: Environments with frequent changes require regular updates to the device inventory to reflect the current state of the network. Balancing Load and Currency: Running Discovery tasks too frequently (e.g., every hour) could lead to unnecessary load on the network and OpenManage Enterprise system, while running them too infrequently (e.g., weekly) might result in outdated information. Daily discovery strikes a balance between these two extremes.
Automated Scheduling: OpenManage Enterprise allows for Discovery tasks to be scheduled automatically, which can be set to occur daily to maintain an up-to-date inventory with minimal manual intervention1.
It's important to note that the specific frequency may need to be adjusted based on the unique characteristics of the network environment, including the number of devices, the nature of the changes, and the capacity of the network infrastructure. The recommendation provided here is based on general best practices for systems management in dynamic environments.



Which page displays the history of all jobs and tasks in OpenManage Enterprise console?

  1. Monitor
  2. Configuration
  3. Application Settings
  4. Discovery

Answer(s): A

Explanation:

In the OpenManage Enterprise console, the history of all jobs and tasks is displayed on the Monitor page. This page is designed to provide administrators with a comprehensive view of the operational status and history of tasks within the system.
Here's how you can view the job and task history:
Accessing the Monitor Page: Log into the OpenManage Enterprise console and navigate to the

Monitor section.
Viewing Jobs and Tasks: Within the Monitor section, you will find various tabs and options that allow you to view the current status and history of all jobs and tasks that have been executed in the environment.
Job History Details: The job history will typically include details such as the job name, description, status, start time, end time, and any associated alerts or notifications. The Monitor page serves as the central hub for tracking and reviewing all system management activities, making it an essential tool for IT administrators to maintain oversight of their infrastructure1.
This information is based on the standard layout and functionality of the OpenManage Enterprise console as described in the official Dell documentation and user guides. It is always recommended to refer to the latest OpenManage Enterprise documentation for the most current features and procedures.



Which are valid user roles in OpenManage Enterprise?

  1. Domain Administrator and Device Manager
  2. Device Administrator and Viewer
  3. User and Administrator
  4. Viewer and Administrator

Answer(s): D

Explanation:

OpenManage Enterprise (OME) has a Role-Based Access Control (RBAC) system that defines user privileges for built-in roles. The valid user roles in OME are:
Administrator: This role has full access to all features and functions within OME, including system configuration, management, and monitoring.
Device Manager: This role can manage and monitor devices but may have restricted access to certain system settings.

Viewer: This role is typically limited to viewing information and cannot make changes to the system or device configurations.
For the purpose of this question, the roles that are considered valid within the context of OME are Viewer and Administrator. These roles are clearly defined within the OME RBAC system and are integral to the security and management of the system1.
The process of assigning roles in OME involves:
Logging into the OME console with administrative credentials.
Navigating to the user management section.
Creating or editing a user account.
Assigning the appropriate role (Viewer or Administrator) to the user based on their responsibilities and the level of access they require.
It's important to note that while "Device Manager" is a valid role, it is not listed as an option in the provided answers. Therefore, the correct answer from the given options is Viewer and Administrator1. This information is verified according to the official Dell OpenManage Enterprise documentation and user guides.



Refer to Exhibit:



An OpenManage Enterprise environment contains both Dell EMC 13G and 14G PowerEdge servers and an online catalog that is configured as shown.

A Device Manager is tasked with creating a firmware baseline using Catalog1 for all the server infrastructure. During the task, they find that they are only able to select the 14G PowerEdge servers in the environment.

What is causing the problem?

  1. Only Administrators are permitted to create firmware baselines
  2. The catalog does not contain any firmware applicable to 13G servers
  3. Only the 14G servers are in the scope of their account
  4. Each firmware baseline can only contain servers from the same generation

Answer(s): B

Explanation:

Understanding the Catalog Configuration: The online catalog, as shown in the exhibit, is configured to source the latest component versions from Dell.com. This catalog is named `Catalog1'. Identifying the Issue: The Device Manager is unable to select 13G PowerEdge servers when creating a firmware baseline using Catalog1. This indicates that the catalog lacks firmware for 13G servers. Catalog Contents: Since Catalog1 is set to pull the latest component versions, it is likely that it only includes firmware for the most recent, supported server generations, which in this case appears to be the 14G PowerEdge servers.
Firmware Baseline Creation: Firmware baselines are created to standardize the firmware versions across the server infrastructure. If certain server generations are not included in the catalog, they cannot be selected for the baseline.
Reference to Dell OpenManage Documentation: Dell OpenManage documentation would typically explain how catalogs are associated with server generations and their firmware. It would state that if a catalog does not contain firmware for a particular generation, servers from that generation cannot be included in the baseline.
The exhibit provided context for the issue at hand, showing that Catalog1 is likely tailored for 14G servers, hence the absence of 13G server firmware. This aligns with standard practices for managing server firmware where catalogs are generation-specific to ensure compatibility and supportability.



In OpenManage Enterprise which type of custom group should be used for a list of devices that update based on specific properties of discovered systems?

  1. Static
  2. Discovery
  3. Dynamic
  4. Query

Answer(s): C

Explanation:

In OpenManage Enterprise, custom groups can be created to organize devices based on various criteria. For a list of devices that update automatically based on specific properties of discovered systems, the appropriate type of custom group to use is a Dynamic group.
Here's a detailed explanation:
Static Groups: These groups are manually created and managed. Devices must be manually added or removed, and the group does not update based on changes to device properties.

Dynamic Groups: These groups are automatically updated based on predefined criteria or properties.
When a device meets the criteria, it is automatically included in the group, and if it no longer meets the criteria, it is removed.
Discovery Groups: These are typically used for organizing devices based on the method of discovery or during the initial discovery phase.
Query Groups: While these groups can be based on specific queries, they are not automatically updated like Dynamic groups.
Therefore, for a list of devices that need to update based on specific properties, a Dynamic group is the recommended choice as it ensures the group membership remains current with the changing properties of the devices1.
This information is based on the functionalities provided by Dell EMC OpenManage Enterprise, as outlined in the official documentation. It is always recommended to refer to the latest OpenManage

Enterprise documentation for the most current features and procedures.



Share your comments for Dell D-OME-OE-A-24 exam with other users:

A
AI Tutor Explanation
5/4/2026 2:43:10 AM

Question 34:

  • Question 34 asks: Which role(s) has the capability to create Policies? Choose two.
  • Likely correct roles: Compliance Manager and Compliance admin (A and B). These roles typically have policy governance rights to create and manage policies.
  • Why not the others: Compliance User is usually a limited user, not allowed to create policies. Risk Manager focuses on risks, not policy creation in standard setups.
  • Note on the provided key: The answer shown is “C” (Compliance User), which conflicts with “Choose two.” This is probably a key error. In practice, verify against your instance’s ACLs or official docs.
  • Quick check tip: In ServiceNow, review the ACLs and role permissions for the Policy records to see which roles can create policies.

A
AI Tutor Explanation
4/29/2026 11:59:58 PM

function of appnav in sdwan

  • AppNav (Application Navigation) is the Cisco SD-WAN feature that provides application-level visibility and control.
  • It maintains a catalog of applications (AppIDs) with attributes (ports/protocols, categories) and classifies traffic accordingly.
  • It allows policy authors to reference apps by name in policies, enabling application-aware routing, QoS, and service chaining based on the app’s requirements.
  • The SD-WAN fabric uses AppNav data to steer traffic along the best path, improving user experience for critical apps while optimizing WAN usage.

A
AI Tutor Explanation
4/29/2026 5:25:25 AM

Question 1:

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct

A
AI Tutor Explanation
4/29/2026 5:23:14 AM

Question 5:

  • Correct answer: A. User4 and User1 only

  • Why this is correct:
- The Automatic Enrollment setting in Intune has MDM user scope: GroupA. Only users in GroupA can enroll devices via MDM auto-enrollment. - Device6 will be enrolled via Windows Autopilot and Intune, so enrollment is allowed only for users in GroupA. - Based on the group memberships in the scenario, User4 and User1 are in GroupA, while User2 and User3 are not. Therefore only User4 and User1 can enroll Device6.
  • Quick tip for the exam:
- Remember: MDM user scope determines who can auto-enroll devices; MAM scope controls app protection enrollment. When a new Autopilot device is enrolled, the signing-in user must be in the MDM scope.

A
AI Tutor Explanation
4/29/2026 5:17:10 AM

Why this is correct

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct:
- Windows Autopilot requires devices to be registered by their hardware IDs (hash) before Autopilot can deploy Windows 10 Enterprise. - Collect the hardware IDs from the new Phoenix machines, save them in a CSV, and upload that CSV in the Intune/Windows Autopilot area. This maps each device to an Autopilot deployment profile. - After registration, you can assign Autopilot profiles (Windows 10 Enterprise, etc.). Other options (serial number CSV, generalizing, or Mobility settings) are not the initial Autopilot registration steps.

A
AI Tutor Explanation
4/25/2026 1:53:46 PM

Question 7:

  • Correct answer: B — A risk score is computed based on the number of remediations needed compared to the industry peer average.

Explanation:
  • Risk360 uses a remediation-based score. It benchmarks how many actions are required to fix issues against peers, giving a relative risk posture.
  • Why not the others:
- A: Not just total risk events by location. - C: Time to mitigate isn’t the primary scoring method. - D: Not a four-stage breach scoring approach.
Note: The page text shows a mismatch (it lists D as the answer), but the study guide describes the remediation-based scoring (B) as the correct concept.

A
AI Tutor Explanation
4/25/2026 1:42:20 PM

Question 104:

  • Correct answer: D) Multi-Terabyte (TB) Range

  • Brief explanation:
- clustering keys organize data into micro-partitions to improve pruning when queries filter on those columns. - The performance benefit is most significant for very large tables; for small tables the overhead of maintaining clustering outweighs gains. - Therefore, as a best practice, define clustering keys on tables at the TB scale.

C
Community Helper
4/25/2026 2:03:10 AM

Q23: Fabric Admin is correct. Because Domain admin cannot create domains. Only Fabric Admin can among the given options. Q51: Wrapping @pipeline.parameter.param1 inside {} will return a string. But question requires the expression to return Int, so correct answer should be @pipeline.parameter.param1 (no {})

A
AI Tutor Explanation
4/23/2026 3:07:03 PM

Question 62:

  • Correct answer: D (per the page)

  • Note: The explanation text on the page describes option B (use ZDX score and Analyze Score to trigger the Y Engine analysis), indicating a mismatch between the stated answer and the rationale.

  • Key concept: For fast root-cause analysis, leverage telemetry and auto-correlated insights:
- Use the user’s ZDX score for AWS and run Analyze Score to activate the Y Engine, which correlates metrics across network, client, and application to pinpoint the issue quickly.
  • Why the other options are less effective:
- A: Only checks for outages; doesn’t provide actionable root-cause analysis. - C: Deep Trace helps visibility but is manual and time-consuming. - D: Packet capture is invasive and slow; not the quickest path to root cause.

A
AI Tutor Explanation
4/23/2026 12:26:21 PM

Question 32:

  • Answer: A (2.4GHz)

  • Why: Lower-frequency signals have longer wavelengths and experience less attenuation when passing through walls and obstacles. Higher frequencies (5GHz, 6GHz) are more easily blocked by walls. NFC operates over very short distances and is not meant to penetrate walls. So 2.4 GHz best penetrates physical objects like walls.

A
AI Tutor Explanation
4/21/2026 8:48:36 AM

Question 3:

  • False is the correct answer (Option B).

Why:
  • In Snowflake, a database is a metadata object that exists within a single Snowflake account. Accounts are isolated—there isn’t one database that lives in multiple accounts.
  • You can access data across accounts via data sharing or database replication, but these create separate database objects in the other accounts (e.g., a database in the consumer account created from a share), not a single shared database across accounts.

So a single database cannot exist in more than one Snowflake account.

A
Anonymous User
4/16/2026 10:54:18 AM

Question 1:

  • Correct answer: E — date = sys.argv[1]
  • Why this is correct:
- When a Databricks Job passes parameters to a notebook, those parameters are supplied to the notebook's Python process as command-line arguments. The first argument after the script name is sys.argv[1], so date = sys.argv[1] captures the passed date value directly.
  • How it compares to other options:
- date = spark.conf.get("date") reads from Spark config, not from job parameters. - input() waits for user input at runtime, which isn’t how job parameters are provided. - date = dbutils.notebooks.getParam("date") would work if the notebook were invoked via dbutils.notebook.run with parameters, not

A
Anonymous User
4/15/2026 4:42:07 AM

Question 528:

  • Correct answer: NSG flow logs for NSG1 (Option B)

  • Why:
- Traffic Analytics uses NSG flow logs to analyze traffic patterns. You must have NSG flow logs enabled for the NSGs you want to monitor. - An Azure Log Analytics workspace is also required to store and query the traffic data. - Network Watcher must be available in the subscription for traffic analytics to function.
  • What to configure (brief steps):
- Ensure Network Watcher is enabled in the East US region (for the subscription/region). - Enable NSG flow logs on NSG1. - Ensure a Log Analytics workspace exists and is accessible (read/write) so Traffic Analytics can store and query logs.
  • Why other options aren’t correct:
- “Diagnostic settings for VM1” or “Diagnostic settings for NSG1” alone don’t guarantee flow logs are captured and sent to Log Analytics, which Traffic Analytics relies on. - “Insights for VM1” is not how Traffic Analytics collects traffic data.

A
Anonymous User
4/15/2026 2:43:53 AM

Question 23:
The correct answer is Domain admin (option B), not Fabric admin.

  • Domain admin provides domain-level management: create domains/subdomains and assign workspaces within those domains, which matches the tasks while following least privilege.
  • Fabric admin is global-level access and is more privileges than needed for this scenario (it would grant broader control across the Fabric environment).

A
Anonymous User
4/14/2026 12:31:34 PM

Question 2:
For question 2, the key concept is the Longest Prefix Match. Routers pick the route whose subnet mask is the most specific (largest prefix length) that still matches the destination IP.
From the options:

  • A) 10.10.10.0/28 ? 10.10.10.0–10.10.10.15
  • B) 10.10.13.0/25 ? 10.10.13.0–10.10.13.127
  • C) 10.10.13.144/28 ? 10.10.13.144–10.10.13.159
  • D) 10.10.13.208/29 ? 10.10.13.208–10.10.13.215

The destination Host A’s IP must fall within 10.10.13.208–10.10.13.215 for the /29 to be the best match. Since /29 is the longest prefix among the matching options, Router1 will use 10.10.13.208/29.
Thus, the correct answer is D.

S
srameh
4/14/2026 10:09:29 AM

Question 3:

  • Correct answer: Phase 4, Post Accreditation

  • Explanation:
- In DITSCAP, the four phases are: - Phase 1: Definition (concept and requirements) - Phase 2: Verification (design and testing) - Phase 3: Validation (fielding and evaluation) - Phase 4: Post Accreditation (ongoing operations and lifecycle management) - The description—continuing operation of an accredited IT system and addressing changing threats throughout its life cycle—fits the Post Accreditation phase, which covers operations, maintenance, monitoring, and reauthorization as threats and environment evolve.

O
onibokun10
4/13/2026 7:50:14 PM

Question 129:
Correct answer: CNAME

  • A CNAME record creates an alias for a domain, so newapplication.comptia.org will resolve to whatever IP address www.comptia.org resolves to. This ensures both names point to the same resource without duplicating the IP.
  • Why not the others:
- SOA defines authoritative information for a zone. - MX specifies mail exchange servers. - NS designates name servers for a zone.
  • Notes: The alias name (newapplication.comptia.org) should not have other records if you use a CNAME for it, and CNAMEs aren’t used for the zone apex (root) domain. This scenario uses a subdomain, so a CNAME is appropriate.

A
Anonymous User
4/13/2026 6:29:58 PM

Question 1:

  • Correct answer: C

  • Why this is best:
- Uses OS Login with IAM, so SSH access is granted via Google accounts rather than distributing per-user SSH keys. - Granting the compute.osAdminLogin role to a Google group gives admin access to all team members in a centralized, auditable way. - Access is auditable: Cloud Audit Logs show who accessed which VM, satisfying the security requirement to determine who accessed a given instance.
  • How it works:
- Enable OS Login on the project/instances (enable-oslogin metadata). - Add the team’s

A
Anonymous User
4/13/2026 1:00:51 PM

Question 2:

  • Answer: D. Azure Advisor

  • Why: To view security-related recommendations for resources in the Compute and Apps area (including App Service Web Apps and Functions), you use Azure Advisor. Advisor surfaces personalized best-practice recommendations across resources, including security, and shows which resources are affected and the severity.

  • Why not the others:
- Azure Log Analytics is for ad-hoc querying of telemetry, not for viewing security recommendations. - Azure Event Hubs is for streaming telemetry data, not for security recommendations.
  • Quick tip: In the portal, navigate to Azure Advisor and check the Security recommendations for App Services to see actionable items and affe

D
Don
4/11/2026 5:36:42 AM

Recommend using AI for Solutions rather the Answer(s) submitted here

M
Mogae Malapela
4/8/2026 6:37:56 AM

This is very interesting

A
Anon
4/6/2026 5:22:54 PM

Are these the same questions you have to pay for in ExamTopics?

L
LRK
3/22/2026 2:38:08 PM

For Question 7 - while the answer description indicates the correct answer, the option no. mentioned is incorrect. Nice and Comprehensive. Thankyou

R
Rian
3/19/2026 9:12:10 AM

This is very good and accurate. Explanation is very helpful even thou some are not 100% right but good enough to pass.

G
Gerrard
3/18/2026 6:58:37 AM

The DP-900 exam can be tricky if you aren't familiar with Microsoft’s specific cloud terminology. I used the practice questions from free-braindumps.com and found them incredibly helpful. The site breaks down core data concepts and Azure services in a way that actually mirrors the real test. As a resutl I passed my exam.

V
Vineet Kumar
3/6/2026 5:26:16 AM

interesting

J
Joe
1/20/2026 8:25:24 AM

Passed this exam 2 days ago. These questions are in the exam. You are safe to use them.

N
NJ
12/24/2025 10:39:07 AM

Helpful to test your preparedness before giving exam

A
Ashwini
12/17/2025 8:24:45 AM

Really helped

J
Jagadesh
12/16/2025 9:57:10 AM

Good explanation

S
shobha
11/29/2025 2:19:59 AM

very helpful

P
Pandithurai
11/12/2025 12:16:21 PM

Question 1, Ans is - Developer,Standard,Professional Direct and Premier

E
Einstein
11/8/2025 4:13:37 AM

Passed this exam in first appointment. Great resource and valid exam dump.

D
David
10/31/2025 4:06:16 PM

Today I wrote this exam and passed, i totally relay on this practice exam. The questions were very tough, these questions are valid and I encounter the same.

AI Tutor 👋 I’m here to help!