A company needs to restore a specific directory from a backup. Which type of recovery operation should they perform?
Answer(s): C
JustificationThe task is to restore only a single directory from a backup.File-level recovery (option C) is designed to retrieve individual files or directories without needing to re-image the entire system. It reads the backup catalog, locates the requested directory, and copies it back to the target location, preserving the original folder structure and permissions. This is the most precise and efficient method when the desired recovery point is limited to a specific sub-folder. Block-level recovery (A) operates on raw disk blocks and is typically used for low-level forensic or disk-clone operations; it does not understand filesystem hierarchy and would require extensive manual mapping, making it unsuitable for a simple directory restore. Image-level recovery (B) restores an entire system image (or a full volume) and therefore overwrites the whole disk or partition, which is overkill when only a directory is needed and introduces unnecessary risk of data loss or corruption. Full system recovery (D) is a complete rebuild of the machine to a known good state, which is inappropriate when the goal is merely to reinstate a directory and would discard all changes made after the backup image was created.Conclusion – The most appropriate and least disruptive approach is file-level recovery , which directly addresses the need to recover a specific directory while minimizing impact on the rest of the system.
Dell Backup and Recovery Overview – https://www.dell.com/support/kbdoc/en-us/000131123/dell-backup-and-recovery-overview File-Level Recovery Procedures – https://www.dell.com/support/kbdoc/en-us/000131124/file-level-recovery-procedures
A full backup of a production volume is created on Sunday, and cumulative backups are created for the rest of the week. What are the contents of the cumulative backup on Thursday?
Answer(s): B
Technical justificationA full backup performed on Sunday captures a complete snapshot of the production volume. Subsequent cumulative backups retain only the blocks that have changed since the last full backup , regardless of how many incremental or cumulative jobs have run in between. Therefore, on Thursday the cumulative backup contains every piece of data that has been modified on the volume from Sunday up to and including Thursday . Option B precisely describes this – “All the data that has changed since Sunday.” Option A describes a full backup, which is not what a cumulative job stores. Option C limits the scope to changes made since Monday , ignoring the Sunday baseline and any changes made on Tuesday-Wednesday. Option D similarly restricts the scope to changes made since Wednesday , omitting the earlier daily changes.Hence, B is the only answer that accurately reflects the nature of cumulative backups in Dell Data Protection.
Dell Data Protection Management User Guide – Backup Types and Scheduling https://www.delltechnologies.com/content/dam/dell-support/manuals/us/en/15/dell-data-protection-management-user-guide.pdfDell Knowledge Base – Understanding Cumulative vs. Incremental Backups https://www.dell.com/support/kbdoc/en-us/000178923/cumulative-backup-definition-and-usage
What is the role of the archive server in the archiving architecture?
JustificationCorrect option – B: Configure data archiving policies The archive server in the Dell Data Protection Management architecture is responsible for interpreting and enforcing the policies that determine how, when, and where fixed data is moved to secondary storage. It executes the policy engine, evaluates retention rules, and manages the archiving workflow, ensuring that objects are correctly classified and transitioned according to business requirements.Why the other options are less suitableA: Store the fixed data – Primary storage or tiered storage nodes hold the data; the archive server does not retain the content itself, it merely orchestrates its relocation. C. Create policies based on file names – Policy creation is typically performed in the management console or policy definition engine; the archive server applies policies but does not generate them solely from file names. D. Scan and archive files – Scanning is performed by the client/agent or scanning service; the archive server’s role is to manage the resulting archive actions, not the scanning process itself.
1. Dell Data Protection Management – Archiving Architecture Overview https://www.dell.com/support/manuals/en-us/bytesafe-dataprotection/8.8.0/archive-architecture2. Dell EMC Data Protection – Configuring Archive Policies https://www.delltechnologies.com/en-us/documentation/uuid_gen2/0a5f1f7b-0e8c-4b9c-9c5c-7d9c9c6e0c3a/whitepaper.pdf
Which type of virtual machine (VM) is created from a snapshot of the parent VM in a clone operation?
Answer(s): D
JustificationA linked clone is generated by taking a snapshot of the parent VM and then creating a new VM that points to that snapshot for its disk and memory state. Because the child VM references the parent’s snapshot files, it consumes far less storage and can be created very quickly, but it remains dependent on the parent for any changes to the base disk. Options A (A snapshot clone) and C (A full clone) do not represent the standard terminology used in VMware/ Dell virtualization products; “snapshot clone” is not a defined clone type, and “full clone” creates an independent copy that does not rely on the parent’s snapshot. Option B (A replicated clone) refers to a clone created through storage-level replication or backup/restore workflows, not by directly using a VM snapshot, and therefore does not match the described “clone operation from a snapshot of the parent VM.”Hence, the correct choice is D – A linked clone , as it is precisely the type of VM that results when a clone is derived from a snapshot of its parent.
VMware Documentation – Creating Linked Clones: https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-esxi-vcenter/about/vm-cloning.html VMware Documentation – Cloning Virtual Machines: https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-vms/about/vm-cloning.html
Which scenario is Image-based backup uniquely suitable for?
Why option D is the only scenario uniquely suited to image-based backupFull-system (image) backup captures the entire block-level view of a volume , including the operating system, boot records, partition layout, installed applications, configuration files, and all associated data. This “snapshot” can be deployed to any compatible hardware platform, allowing a complete restoration of a crashed workstation, a physical server, or an entire virtual machine (VM) in minutes . Because the backup retains the exact disk geometry and boot sector, the restored environment boots exactly as the source system, which is essential when the goal is to resurrect a whole VM or physical host after failure.Why the other options do not fit the unique strengths of image-based backupA: Restoring individual files – Image backups are block-level; they do not provide granular file-by-file recovery unless a separate file-level extract is performed. Conventional file-based or granular backups are far more efficient for this use case. B. Backing up application data only – Application-specific data can be captured more precisely with file-level or application-aware backups that preserve transaction integrity and avoid unnecessary duplication of unrelated system files. C. Performing incremental backups – Incremental techniques can be implemented with either image-based or file-based solutions; they are not a distinguishing capability of image backups. Many non-image solutions (e.g., block-level change tracking) achieve incremental backups just as effectively.Therefore, the only scenario where image-based backup offers a distinct advantage is when an entire VM (or physical system) must be restored to its exact original state, which is precisely what option D describes.
Dell Data Protection Knowledge Base – Image-Based Backup for Virtual Environments: https://www.dell.com/support/manuals/us/en/04/dataprotection/v2/image_backup_virtual_env.pdf Dell EMC – Data Protection Fundamentals: Image vs. File-Based Backups: https://www.dell.com/support/manuals/us/en/04/dataprotection/v2/data_protection_backup_types.pdf
An organization requires employees to use a password and a token-generated passcode to access internal applications. Which security mechanism is being utilized?
Correct option: C. Multi-factor authentication (MFA)Technical justificationMFA definition: MFA requires the use of two or more independent authentication factors – something you know (e.g., a password) and something you possess or are (e.g., a token-generated passcode). Fit for the scenario: The described requirement forces users to present both a password (knowledge factor) and a token-generated passcode (possession factor), which matches the MFA pattern. Why the other choices are less appropriateA: Digital signatures – Provide authentication and integrity for digital documents or code, not for interactive login sessions. B. Role-based access control (RBAC) – Governs authorization (what you can do) based on assigned roles; it does not dictate how a user proves identity. D. Single sign-on (SSO) – Enables a user to authenticate once and gain access to multiple resources, but it does not necessarily involve multiple authentication factors. It can be combined with MFA, but SSO alone does not guarantee the two-factor requirement described.Therefore, the mechanism that explicitly incorporates the two distinct factors (password + token-generated passcode) is Multi-factor authentication (MFA) .
NIST Special Publication 800-63B – Digital Identity Guidelines, Section 5.1.1 “Authentication Factor Types”. https://csrc.nist.gov/publications/detail/sp/800-63b/final “Multi-Factor Authentication” – Cisco Documentation, “What is MFA?”. https://www.cisco.com/c/en/us/td/docs/security/authentication/rsa/rsa-6-0/rsa-6-0-0/rsa-6-0-0-mfa.htmlThese sources confirm the definition and technical criteria for MFA and differentiate it from digital signatures, RBAC, and SSO.
A backup administrator has defined a backup policy where full backups are scheduled at 8 PM every Saturday and incremental backups for the rest of the week at same time. A data loss happened on Wednesday at 11 AM. How many backup copies are required to restore the requested files?
Why Option B (4 backup copies) is the correct choiceThe policy creates one full backup each Saturday at 20:00 . All other days of the week receive incremental backups executed at the same 20:00 time slot . A failure occurs Wednesday at 11:00 , which is before the Wednesday-night incremental backup has been taken.To rebuild the system to the point just before the failure, you must:1. Restore the most recent full backup taken on the preceding Saturday. 2. Apply every incremental backup that was created after that full backup and before the failure :Sunday incremental Monday incremental Tuesday incrementalThat requires four distinct backup sets (1 full + 3 incrementals) . Adding any later incremental (e.g., Wednesday’s) would overshoot the required point in time, while using fewer than four would leave gaps in the change history.Why the other options are unsuitableOption A (2) – Only a full + one incremental would miss the changes captured on the intervening days (Sunday-Tuesday), resulting in an incomplete restore. Option C (5) & D (6) – Counting extra later incrementals (e.g., Wednesday, Thursday, Friday) restores data after the failure and therefore does not match the exact pre-failure state required for recovery.Hence, four backup copies (full + three applicable incrementals) are both necessary and sufficient.
Dell Data Protection Management Foundations v2 – Backup scheduling and restore concepts: Dell Backup Administration Guide Official Dell Certification Study Materials – “Incremental backup chain reconstruction” topic: Dell EMC Certification portal
How does block-level deduplication with variable-length segments improve storage efficiency?
Answer(s): A
Correct answer: ABlock-level variable-length deduplication continuously re-examines incoming data and adjusts segment boundaries based on data changes , allowing the system to capture repetitions more precisely and avoid unnecessary duplication. Because segments are sized dynamically, only the data that actually changes requires new storage; unchanged data can be referenced by existing variable-length segments, maximizing space savings. This dynamic resizing reduces overhead compared with fixed-size blocks, which may split optimal repeat patterns into inefficient fragments.Why the other options are less suitableB: Uses object IDs to store and retrieve data – Object IDs are a naming mechanism used in object-storage systems; they do not influence how variable-length blocks are formed or merged during deduplication. C. Stores multiple copies of the same data segment – Storing duplicates would increase capacity usage rather than reduce it, contradicting the purpose of deduplication. D. Breaks files down into fixed-length segments – Fixed-length segmentation cannot adapt to the varying patterns of data, leading to larger segments that either miss compression opportunities or waste space on partial repeats.
1. Dell EMC Data Protection Management Foundations v2 – Variable-Length Block DeduplicationOverview (PDF) – https://www.delltechnologies.com/en-us/documentation/dpms/v2.0/technical-overviews/variable-length-deduplication.pdf 2. Dell EMC Data Protection Management Administration Guide – Block-Level Deduplication (online)– https://www.delltechnologies.com/en-us/documentation/dpms/v2.0/admin_guide/block-deduplication.html
Share your comments for Dell D-DP-FN-01 exam with other users:
q 105 . ans is d
i have interest to get a sybase iq dba certification
want to pass exm.
are the answers correct?
good morning, could you please upload this exam again, i need it to test my knowledge in sd-wan with version 7.0.
very nice question
i have learning disability and this exam dumps allowed me to focus on the actual questions and not worry about notes and the those other study materials.
165 should be apt
please upload the dumps, real need of them
any recent feeedback?
question number 2 is indicating you are giving proper questions. observe and change properly.
passed today.40% questions were new.litwere case study,lots of new questions on afd,ratelimit,tm,lb,app gatway.got 2 set series of questions which are not present here.questions on azure cyclecloud, no.of vnet/vms required for implimentation,blueprints assignment/management group etc
practice test
want the dumps for emc content management server programming(cmsp)
brilliant and helpful
q75. azure files is pass
very helpful
thank you for these questions. it helped a lot.
how do i get the h12-724 dumps
nice data dumps
answers are correct
good explanation
hi team just want to know if there is any update version of the exam 350-401
helpful on 2017 scrum guide
planning to attempt for the exam.
pleaseee upload
thanks ly so i have information cia
hello team, i need sap qm dumps for practice
it’s good but not senatios based
q.119 - the correct answer is b - they are not captured in an update set as theyre data.
good matter
please upload c_sacp_2308
please upload the dump. thanks very much !!
good questions
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your D-DP-FN-01, please sign in or create a free account.