CWNP Certified Wireless IoT Solutions Administrator CWISA-103 Dumps in PDF

Free CWNP CWISA-103 Real Questions (page: 4)

What function does the IEEE perform in relation to wireless technologies?

  1. Promotes technology and standards development
  2. Designs wireless chipsets
  3. Certified equipment to be compatible
  4. Brings wireless products to market

Answer(s): A

Explanation:

IEEE's Role: The Institute of Electrical and Electronics Engineers (IEEE) is a global organization critical in developing and promoting technical standards across various fields, including wireless technologies.
Standards Work: IEEE creates wireless technology standards like:
IEEE 802.11: Wi-Fi standards

IEEE 802.15.4: Basis for ZigBee, Thread, and other low-power networks reference
IEEE: https://www.ieee.org/



What is the benefit of using SINR as opposed to SNR to reference signal quality at a receiver?

  1. SINR includes interference as well as the noise floor
  2. SNR excludes the noise floor, which skews the results
  3. SINR excludes interference and only measures the noise floor
  4. SNR includes interference measurements that skew the results

Answer(s): A

Explanation:

SINR vs. SNR:
SNR (Signal-to-Noise Ratio): Measures the power of the desired signal relative to background noise. SINR (Signal-to-Interference-plus-Noise Ratio): Considers both background noise and interference from other signals operating on the same frequency.
Practical Importance: SINR is a more realistic indicator of real-world signal quality in wireless environments where interference is a significant factor.


Reference:

SINR: https://en.wikipedia.org/wiki/Signal-to-interference-plus-noise_ratio SNR: https://en.wikipedia.org/wiki/Signal-to-noise_ratio



What is defined as the weakening of signal amplitude as the signal passes through a medium?

  1. Diffraction
  2. Reflection
  3. Attenuation
  4. Scattering

Answer(s): C

Explanation:

Attenuation: Describes the progressive loss of signal strength as it travels through a medium (like air, cables, walls). It's caused by factors like absorption, distance, and obstacles.
Other Phenomena:
Diffraction: Bending of waves around obstacles.
Reflection: Waves bouncing off surfaces.
**Scattering: ** Waves dispersing in multiple directions.


Reference:

Attenuation: https://en.wikipedia.org/wiki/Attenuation



How is ASK modulation different from FSK modulation?

  1. ASK varies the amplitude of the signal while FSK shifts its frequency
  2. FSK is more sensitive to noise than ASK
  3. ASK does not work at high frequencies
  4. ASK can carry more data than FSK

Answer(s): A

Explanation:

Key Modulation Differences:
ASK (Amplitude Shift Keying): Digital data is represented by changes in the amplitude (strength) of a carrier wave.
FSK (Frequency Shift Keying): Digital data is represented by changes in the frequency of a carrier wave.


Reference:

ASK: https://en.wikipedia.org/wiki/Amplitude-shift_keying FSK: https://en.wikipedia.org/wiki/Frequency-shift_keying



What does the number in the various Quadrature Amplitude Modulation levels, such as 16 in QAM- 16 and 64 in QAM-64, indicate? (Choose the single best answer.)

  1. The speed of data transfer, which is four times the number in the QAM level
  2. The channel width, which is stipulated in MHz
  3. The number of target points in the QAM constellation, which are equivalent to amplitude and phase combinations
  4. The number of spatial streams, which is 1/4 the number in the QAM level

Answer(s): C

Explanation:

QAM Constellations: QAM (Quadrature Amplitude Modulation) uses a constellation diagram where points represent unique combinations of amplitude and phase. Bits per Symbol: The number in QAM-XX indicates the number of points:
QAM-16: 16 points = 2^4 = 4 bits per symbol
QAM-64: 64 points = 2^6 = 6 bits per symbol
Higher Data Rates: More points in the constellation enable transmitting more bits per symbol, leading to higher data rates at the same bandwidth.


Reference:

QAM: https://en.wikipedia.org/wiki/Quadrature_amplitude_modulation



What modulation is used by LoRa?

  1. OFDMA
  2. CSS
  3. ASK
  4. OFDM

Answer(s): B

Explanation:

LoRa Modulation: LoRa (Long Range) is a proprietary wireless technology that utilizes Chirp Spread Spectrum (CSS) modulation.

CSS Characteristics:
Spread spectrum technique for resilience against interference. Chirps (frequency sweeps) enable operation below the noise floor for long range.


Reference:

LoRa: https://en.wikipedia.org/wiki/LoRa
Chirp Spread Spectrum (CSS): https://en.wikipedia.org/wiki/Chirp_spread_spectrum



What primary component is required to implement a wireless transceiver in a device?

  1. GPIO pins
  2. SRAM
  3. Flash memory
  4. Radio

Answer(s): D

Explanation:

Wireless Transceiver: A transceiver is a combination of a transmitter and receiver used for wireless communication.
Radio: The radio is the primary component responsible for:
Modulation: Encoding data onto a carrier wave.
Demodulation: Extracting data from a received signal.
Transmission/Reception: Handling the actual sending and receiving of modulated signals over the air.


Reference:

Transceiver: https://en.wikipedia.org/wiki/Transceiver



How does OFDMA differ from OFDM?

  1. Subcarriers of OFDMA can contain data destined for a different receiver
  2. OFDMA offers greater range by using multiple channels at once
  3. OFDMA allows multiple devices to transmit simultaneously on the same frequency
  4. OFDMA uses multiple radios to achieve higher throughput

Answer(s): C

Explanation:

OFDM vs. OFDMA:
OFDM (Orthogonal Frequency-Division Multiplexing): Divides a channel into multiple subcarriers for data transmission.
OFDMA (Orthogonal Frequency-Division Multiple Access): Extends OFDM by allowing multiple users to share subcarriers simultaneously, improving efficiency and spectral utilization.


Reference:

OFDM: https://en.wikipedia.org/wiki/Orthogonal_frequency-division_multiplexing
OFDMA: https://en.wikipedia.org/wiki/Orthogonal_frequency-division_multiple_access



Share your comments for CWNP CWISA-103 exam with other users:

A
alma
8/25/2023 1:20:00 PM

just started preparing for the exam

C
CW
7/10/2023 6:46:00 PM

these are the type of questions i need.

N
Nobody
8/30/2023 9:54:00 PM

does this actually work? are they the exam questions and answers word for word?

S
Salah
7/23/2023 9:46:00 AM

thanks for providing these questions

R
Ritu
9/15/2023 5:55:00 AM

interesting

R
Ron
5/30/2023 8:33:00 AM

these dumps are pretty good.

S
Sowl
8/10/2023 6:22:00 PM

good questions

B
Blessious Phiri
8/15/2023 2:02:00 PM

dbua is used for upgrading oracle database

R
Richard
10/24/2023 6:12:00 AM

i am thrilled to say that i passed my amazon web services mls-c01 exam, thanks to study materials. they were comprehensive and well-structured, making my preparation efficient.

J
Janjua
5/22/2023 3:31:00 PM

please upload latest ibm ace c1000-056 dumps

M
Matt
12/30/2023 11:18:00 AM

if only explanations were provided...

R
Rasha
6/29/2023 8:23:00 PM

yes .. i need the dump if you can help me

A
Anonymous
7/25/2023 8:05:00 AM

good morning, could you please upload this exam again?

A
AJ
9/24/2023 9:32:00 AM

hi please upload sre foundation and practitioner exam questions

P
peter parker
8/10/2023 10:59:00 AM

the exam is listed as 80 questions with a pass mark of 70%, how is your 50 questions related?

B
Berihun
7/13/2023 7:29:00 AM

all questions are so important and covers all ccna modules

N
nspk
1/19/2024 12:53:00 AM

q 44. ans:- b (goto setup > order settings > select enable optional price books for orders) reference link --> https://resources.docs.salesforce.com/latest/latest/en-us/sfdc/pdf/sfom_impl_b2b_b2b2c.pdf(decide whether you want to enable the optional price books feature. if so, select enable optional price books for orders. you can use orders in salesforce while managing price books in an external platform. if you’re using d2c commerce, you must select enable optional price books for orders.)

M
Muhammad Rawish Siddiqui
12/2/2023 5:28:00 AM

"cost of replacing data if it were lost" is also correct.

A
Anonymous
7/14/2023 3:17:00 AM

pls upload the questions

M
Mukesh
7/10/2023 4:14:00 PM

good questions

E
Elie Abou Chrouch
12/11/2023 3:38:00 AM

question 182 - correct answer is d. ethernet frame length is 64 - 1518b. length of user data containing is that frame: 46 - 1500b.

D
Damien
9/23/2023 8:37:00 AM

i need this exam pls

N
Nani
9/10/2023 12:02:00 PM

its required for me, please make it enable to access. thanks

E
ethiopia
8/2/2023 2:18:00 AM

seems good..

W
whoAreWeReally
12/19/2023 8:29:00 PM

took the test last week, i did have about 15 - 20 word for word from this site on the test. (only was able to cram 600 of the questions from this site so maybe more were there i didnt review) had 4 labs, bgp, lacp, vrf with tunnels and actually had to skip a lab due to time. lots of automation syntax questions.

V
vs
9/2/2023 12:19:00 PM

no comments

J
john adenu
11/14/2023 11:02:00 AM

nice questions bring out the best in you.

O
Osman
11/21/2023 2:27:00 PM

really helpful

E
Edward
9/13/2023 5:27:00 PM

question #50 and question #81 are exactly the same questions, azure site recovery provides________for virtual machines. the first says that it is fault tolerance is the answer and second says disater recovery. from my research, it says it should be disaster recovery. can anybody explain to me why? thank you

M
Monti
5/24/2023 11:14:00 PM

iam thankful for these exam dumps questions, i would not have passed without this exam dumps.

A
Anon
10/25/2023 10:48:00 PM

some of the answers seem to be inaccurate. q10 for example shouldnt it be an m custom column?

P
PeterPan
10/18/2023 10:22:00 AM

are the question real or fake?

C
CW
7/11/2023 3:19:00 PM

thank you for providing such assistance.

M
Mn8300
11/9/2023 8:53:00 AM

nice questions

AI Tutor 👋 I’m here to help!