CWNP Certified Wireless Design Professional CWDP-305 Dumps in PDF

Free CWNP CWDP-305 Real Questions (page: 5)

Which document provided to your customer should include all devices and parts that will be used during the deployment of their WLAN infrastructure?

  1. SoW (Statement of Work)
  2. BoM (Bill of Materials)
  3. Design report
  4. Project plan

Answer(s): B



What limitation exists when WMM is not enabled on an 802.11 WLAN?

  1. 802.11 QoS will not be available
  2. The maximum channel-width will be 20 MHz
  3. EDCA values will change
  4. Only two ACs will be available

Answer(s): A



When designing for OFDMA, why might the same channel bandwidth result in greater efficiency than that available in 802.11n and 802.11ac?

  1. The design will use MU-MIMO, which is not available in either 802.11n or 802.11ac.
  2. The design will use transmit beamforming, which is not available in either 802.11n or 802.11ac.
  3. The design will use RUs that allow for transmissions to multiple client devices concurrently without the use of MU-MIMO.
  4. The clients will use UL MU-MIMO coupled with DSSS, which was not available in 802.11n or 802.11ac.

Answer(s): C



What service must be implemented on your customer's network to authenticate users against an LDAP database before granting access to the WLAN infrastructure?

  1. SSH
  2. RADIUS
  3. SFTP
  4. TLS

Answer(s): B



What is the best method of gathering attenuation measurements from wall materials?

  1. After measuring the RSSI in free space 5 meters (16.5 feet) apart, put an AP 4 meters (13 feet) away from the wall on one side and your measuring device 1 meter (3.2 feet) away from the wall minus the width of the wall. Take measurements and compare the difference.
  2. Use the pre-built attenuation values in the predictive design tools as they are more accurate than free-space metrics gathered with commercial devices.
  3. After measuring the RSSI in free space 1 meter (3 feet) apart, put an AP 0.32 meters (1 feet) away from the wall on one side and your measuring device 0.67 meters (2 feet) away from the wall on the other side. Take measurements and compare the difference.
  4. Look on the Internet for attenuation values for each one of the materials that might attenuate the Wi-Fi signal using the material providers' websites.

Answer(s): C



Which type of authentication and encryption method is mandatory for Voice Enterprise certified devices as specified by the Wi-Fi Alliance?

  1. WPA2/AES Personal
  2. WPA2/TKIP Enterprise
  3. WPA2/AES Enterprise
  4. WPA/TKIP Personal

Answer(s): C



Which document provides detailed instructions for installation technicians on how to properly mount and configure access points (APs)?

  1. Hold Harmless
  2. Statement of Work
  3. Bill of Materials
  4. Physical installation guide

Answer(s): D



In addition to a copy of your design, which tools should you provide to ensure the installation team correctly deploys access points (APs) in the specified locations within a multi-floor indoor design?

  1. GPS and a map
  2. RF spectrum analyzer and packet capturing software
  3. Ladder and a pen
  4. Camera and marking tools

Answer(s): C



Share your comments for CWNP CWDP-305 exam with other users:

P
patel
10/25/2023 8:17:00 AM

how can rea next

M
MortonG
10/19/2023 6:32:00 PM

question: 128 d is the wrong answer...should be c

J
Jayant
11/2/2023 3:15:00 AM

thanks for az 700 dumps

B
Bipul Mishra
12/14/2023 7:12:00 AM

thank you for this tableau dumps . it will helpfull for tableau certification

H
hello
10/31/2023 12:07:00 PM

good content

M
Matheus
9/3/2023 2:14:00 PM

just testing if the comments are real

Y
yenvti2@gmail.com
8/12/2023 7:56:00 PM

very helpful for exam preparation

M
Miguel
10/5/2023 12:16:00 PM

question 11: https://help.salesforce.com/s/articleview?id=sf.admin_lead_to_patient_setup_overview.htm&type=5

N
Noushin
11/28/2023 4:52:00 PM

i think the answer to question 42 is b not c

S
susan sandivore
8/28/2023 1:00:00 AM

thanks for the dump

A
Aderonke
10/31/2023 12:51:00 AM

fantastic assessments

P
Priscila
7/22/2022 9:59:00 AM

i find the xengine test engine simulator to be more fun than reading from pdf.

S
suresh
12/16/2023 10:54:00 PM

nice document

W
Wali
6/4/2023 10:07:00 PM

thank you for making the questions and answers intractive and selectable.

N
Nawaz
7/18/2023 1:10:00 AM

answers are correct?

D
das
6/23/2023 7:57:00 AM

can i belive this dump

S
Sanjay
10/15/2023 1:34:00 PM

great site to practice for sitecore exam

J
jaya
12/17/2023 8:36:00 AM

good for students

B
Bsmaind
8/20/2023 9:23:00 AM

nice practice dumps

K
kumar
11/15/2023 11:24:00 AM

nokia 4a0-114 dumps

V
Vetri
10/3/2023 12:59:00 AM

great content and wonderful to have the answers with explanation

R
Ranjith
8/21/2023 3:39:00 PM

for question #118, the answer is option c. the screen shot is showing the drop down, but the answer is marked incorrectly please update . thanks for sharing such nice questions.

E
Eduardo Ramírez
12/11/2023 9:55:00 PM

the correct answer for the question 29 is d.

D
Dass
11/2/2023 7:43:00 AM

question no 22: correct answers: bc, 1 per session 1 per page 1 per component always

R
Reddy
12/14/2023 2:42:00 AM

these are pretty useful

D
Daisy Delgado
1/9/2023 1:05:00 PM

awesome

A
Atif
6/13/2023 4:09:00 AM

yes please upload

X
Xunil
6/12/2023 3:04:00 PM

great job whoever put this together, for the greater good! thanks!

L
Lakshmi
10/2/2023 5:26:00 AM

just started to view all questions for the exam

R
rani
1/19/2024 11:52:00 AM

helpful material

G
Greg
11/16/2023 6:59:00 AM

hope for the best

H
hi
10/5/2023 4:00:00 AM

will post exam has finished

V
Vmotu
8/24/2023 11:14:00 AM

really correct and good analyze!

H
hicham
5/30/2023 8:57:00 AM

excellent thanks a lot

AI Tutor 👋 I’m here to help!