CWNP Certified Wireless Design Professional CWDP-305 Dumps in PDF

Free CWNP CWDP-305 Real Questions (page: 36)

Who should be present from the customer side during the final meeting after successfully implementing a WLAN infrastructure?

  1. Acquirer and stakeholders
  2. End-users
  3. The customer's customers
  4. Remote workers

Answer(s): A



During a validation site survey, you discover that some access points (APs) have been mounted above the ceiling due to an aesthetic request from the building architect. However, no aesthetics constraints were communicated during the requirements gathering from the main stakeholder of the project.
What is the appropriate course of action?

  1. Advise the stakeholder that WLAN performance requirements will not be met and a new design process will be needed to meet the requirements
  2. Leave it as it is and allow automatic channel management to correct any issues
  3. Increase the output power on all APs by 6 dB immediately to accommodate for the additional attenuation
  4. Remove all external antennas and use only the internal antennas to reduce multipath and increase acquirer satisfaction

Answer(s): A



According to IEEE 29148-2018, which of the following is a characteristic of a requirements set that is not a characteristic of an individual requirement statement?

  1. Comprehensible
  2. Feasible
  3. Necessary
  4. Verifiable

Answer(s): A



In a convention center auditorium, you've received complaints about the WLAN performance. Currently, only two APs are installed, but they are supporting over 300 client devices simultaneously, which exceeds the original design.
What action should you take to ensure the Wi-Fi works as expected?

  1. Redesign the WLAN for the auditorium requirement area
  2. Quickly add more APs to the auditorium requirement area
  3. Upgrade the Ethernet connections to MultiGig
  4. Turn up the output power on the APs so that they can handle more clients

Answer(s): A



In 802.11, clients are required to be calibrated for RSSI and SNR reporting to:

  1. Within +/-5 dB
  2. Within +/-3 dB
  3. Within +/-1 dB
  4. Within +/-0.5 dB
  5. Within +/-0.25 dB
  6. No specific value

Answer(s): F



You have determined the best mounting locations for APs in a given installation. The facilities manager has asked you to change the locations for several APs due to aesthetic concerns. You suggest mounting the APs in the ideal locations and painting them so they go unnoticed in the environment.
What is a valid recommendation or consideration when painting APs?

  1. Always use paints with metallic dye in them to prevent potential RF propagation impact.
  2. Painting APs will significantly reduce the output power.
  3. Painting APs may void the product manufacturer's warranty.
  4. Most AP models for indoor environments come in a variety of form factors and colors. Painting is never recommended.

Answer(s): C



When deploying long-distance 802.11 bridge links (10 miles / 16 km), what parameter may be critical for improving data flow by reducing retries caused by the long distances?

  1. The sequence control field value
  2. The acknowledgement timeout threshold
  3. The minimum transmit data rate value
  4. The CTS-to-self threshold

Answer(s): B



One of your customers plans on providing wireless coverage to a warehouse facility. After performing an initial walkthrough, you collect the following information:
The central part of the warehouse is between 400 and 600 feet (122 to 183 meters) from the warehouse switches mounted on the walls.
The warehouse storage is composed of metallic racks with varying inventory levels and contents, from electronics and plastic toys to food pallets and juice bottles.
Workers need basic data coverage from their working location, and are not highly mobile. They usually work from one single aisle, and their laptop is on a cart with wheels.
What would be your one recommendation to provide coverage to the central area of the warehouse?

  1. Equip workers laptops with a directional antenna and install APs less than 328 feet (100m) away from the switch.
  2. In this case, extend the cable length just beyond 328 feet (100 m) and position APs as close as possible to the central area of the warehouse.
  3. Position APs along the walls, and equip the APs with Yagi antennas to cover the central area.
  4. Install APs for client access in the central area and use a mesh backhaul link to connect to the DS.

Answer(s): B



Share your comments for CWNP CWDP-305 exam with other users:

A
Andy
12/26/2023 9:35:00 PM

plan to take theaws certified developer - associate dva-c02 in the next few weeks

S
siva
5/17/2023 12:32:00 AM

very helpfull

M
mouna
9/27/2023 8:53:00 AM

good questions

B
Bhavya
9/12/2023 7:18:00 AM

help to practice csa exam

M
Malik
9/28/2023 1:09:00 PM

nice tip and well documented

R
rodrigo
6/22/2023 7:55:00 AM

i need the exam

D
Dan
6/29/2023 1:53:00 PM

please upload

A
Ale M
11/22/2023 6:38:00 PM

prepping for fsc exam

A
ahmad hassan
9/6/2023 3:26:00 AM

pd1 with great experience

Ž
Žarko
9/5/2023 3:35:00 AM

@t it seems like azure service bus message quesues could be the best solution

S
Shiji
10/15/2023 1:08:00 PM

helpful to check your understanding.

D
Da Costa
8/27/2023 11:43:00 AM

question 128 the answer should be static not auto

B
bot
7/26/2023 6:45:00 PM

more comments here

K
Kaleemullah
12/31/2023 1:35:00 AM

great support to appear for exams

B
Bsmaind
8/20/2023 9:26:00 AM

useful dumps

B
Blessious Phiri
8/13/2023 8:37:00 AM

making progress

N
Nabla
9/17/2023 10:20:00 AM

q31 answer should be d i think

V
vladputin
7/20/2023 5:00:00 AM

is this real?

N
Nick W
9/29/2023 7:32:00 AM

q10: c and f are also true. q11: this is outdated. you no longer need ownership on a pipe to operate it

N
Naveed
8/28/2023 2:48:00 AM

good questions with simple explanation

C
cert
9/24/2023 4:53:00 PM

admin guide (windows) respond to malicious causality chains. when the cortex xdr agent identifies a remote network connection that attempts to perform malicious activity—such as encrypting endpoint files—the agent can automatically block the ip address to close all existing communication and block new connections from this ip address to the endpoint. when cortex xdrblocks an ip address per endpoint, that address remains blocked throughout all agent profiles and policies, including any host-firewall policy rules. you can view the list of all blocked ip addresses per endpoint from the action center, as well as unblock them to re-enable communication as appropriate. this module is supported with cortex xdr agent 7.3.0 and later. select the action mode to take when the cortex xdr agent detects remote malicious causality chains: enabled (default)—terminate connection and block ip address of the remote connection. disabled—do not block remote ip addresses. to allow specific and known s

Y
Yves
8/29/2023 8:46:00 PM

very inciting

M
Miguel
10/16/2023 11:18:00 AM

question 5, it seems a instead of d, because: - care plan = case - patient = person account - product = product2;

B
Byset
9/25/2023 12:49:00 AM

it look like real one

D
Debabrata Das
8/28/2023 8:42:00 AM

i am taking oracle fcc certification test next two days, pls share question dumps

N
nITA KALE
8/22/2023 1:57:00 AM

i need dumps

C
CV
9/9/2023 1:54:00 PM

its time to comptia sec+

S
SkepticReader
8/1/2023 8:51:00 AM

question 35 has an answer for a different question. i believe the answer is "a" because it shut off the firewall. "0" in registry data means that its false (aka off).

N
Nabin
10/16/2023 4:58:00 AM

helpful content

B
Blessious Phiri
8/15/2023 3:19:00 PM

oracle 19c is complex db

S
Sreenivas
10/24/2023 12:59:00 AM

helpful for practice

L
Liz
9/11/2022 11:27:00 PM

support team is fast and deeply knowledgeable. i appreciate that a lot.

N
Namrata
7/15/2023 2:22:00 AM

helpful questions

L
lipsa
11/8/2023 12:54:00 PM

thanks for question

AI Tutor 👋 I’m here to help!