CWNP Certified Wireless Design Professional CWDP-305 Dumps in PDF

Free CWNP CWDP-305 Real Questions (page: 19)

Who should be present from the customer side during the final meeting after successfully implementing a WLAN infrastructure?

  1. Acquirer and stakeholders
  2. End-users
  3. The customer's customers
  4. Remote workers

Answer(s): A



During a validation site survey, you discover that some access points (APs) have been mounted above the ceiling due to an aesthetic request from the building architect. However, no aesthetics constraints were communicated during the requirements gathering from the main stakeholder of the project.
What is the appropriate course of action?

  1. Advise the stakeholder that WLAN performance requirements will not be met and a new design process will be needed to meet the requirements
  2. Leave it as it is and allow automatic channel management to correct any issues
  3. Increase the output power on all APs by 6 dB immediately to accommodate for the additional attenuation
  4. Remove all external antennas and use only the internal antennas to reduce multipath and increase acquirer satisfaction

Answer(s): A



According to IEEE 29148-2018, which of the following is a characteristic of a requirements set that is not a characteristic of an individual requirement statement?

  1. Comprehensible
  2. Feasible
  3. Necessary
  4. Verifiable

Answer(s): A



In a convention center auditorium, you've received complaints about the WLAN performance. Currently, only two APs are installed, but they are supporting over 300 client devices simultaneously, which exceeds the original design.
What action should you take to ensure the Wi-Fi works as expected?

  1. Redesign the WLAN for the auditorium requirement area
  2. Quickly add more APs to the auditorium requirement area
  3. Upgrade the Ethernet connections to MultiGig
  4. Turn up the output power on the APs so that they can handle more clients

Answer(s): A



In 802.11, clients are required to be calibrated for RSSI and SNR reporting to:

  1. Within +/-5 dB
  2. Within +/-3 dB
  3. Within +/-1 dB
  4. Within +/-0.5 dB
  5. Within +/-0.25 dB
  6. No specific value

Answer(s): F



You have determined the best mounting locations for APs in a given installation. The facilities manager has asked you to change the locations for several APs due to aesthetic concerns. You suggest mounting the APs in the ideal locations and painting them so they go unnoticed in the environment.
What is a valid recommendation or consideration when painting APs?

  1. Always use paints with metallic dye in them to prevent potential RF propagation impact.
  2. Painting APs will significantly reduce the output power.
  3. Painting APs may void the product manufacturer's warranty.
  4. Most AP models for indoor environments come in a variety of form factors and colors. Painting is never recommended.

Answer(s): C



When deploying long-distance 802.11 bridge links (10 miles / 16 km), what parameter may be critical for improving data flow by reducing retries caused by the long distances?

  1. The sequence control field value
  2. The acknowledgement timeout threshold
  3. The minimum transmit data rate value
  4. The CTS-to-self threshold

Answer(s): B



One of your customers plans on providing wireless coverage to a warehouse facility. After performing an initial walkthrough, you collect the following information:
The central part of the warehouse is between 400 and 600 feet (122 to 183 meters) from the warehouse switches mounted on the walls.
The warehouse storage is composed of metallic racks with varying inventory levels and contents, from electronics and plastic toys to food pallets and juice bottles.
Workers need basic data coverage from their working location, and are not highly mobile. They usually work from one single aisle, and their laptop is on a cart with wheels.
What would be your one recommendation to provide coverage to the central area of the warehouse?

  1. Equip workers laptops with a directional antenna and install APs less than 328 feet (100m) away from the switch.
  2. In this case, extend the cable length just beyond 328 feet (100 m) and position APs as close as possible to the central area of the warehouse.
  3. Position APs along the walls, and equip the APs with Yagi antennas to cover the central area.
  4. Install APs for client access in the central area and use a mesh backhaul link to connect to the DS.

Answer(s): B



Share your comments for CWNP CWDP-305 exam with other users:

M
Mayur Shermale
11/23/2023 12:22:00 AM

its intresting, i would like to learn more abouth this

J
JM
12/19/2023 2:23:00 PM

q252: dns poisoning is the correct answer, not locator redirection. beaconing is detected from a host. this indicates that the system has been infected with malware, which could be the source of local dns poisoning. location redirection works by either embedding the redirection in the original websites code or having a user click on a url that has an embedded redirect. since users at a different office are not getting redirected, it isnt an embedded redirection on the original website and since the user is manually typing in the url and not clicking a link, it isnt a modified link.

F
Freddie
12/12/2023 12:37:00 PM

helpful dump questions

D
Da Costa
8/25/2023 7:30:00 AM

question 423 eigrp uses metric

B
Bsmaind
8/20/2023 9:22:00 AM

hello nice dumps

B
beau
1/12/2024 4:53:00 PM

good resource for learning

S
Sandeep
12/29/2023 4:07:00 AM

very useful

K
kevin
9/29/2023 8:04:00 AM

physical tempering techniques

B
Blessious Phiri
8/15/2023 4:08:00 PM

its giving best technical knowledge

T
Testbear
6/13/2023 11:15:00 AM

please upload

S
shime
10/24/2023 4:23:00 AM

great question with explanation thanks!!

T
Thembelani
5/30/2023 2:40:00 AM

does this exam have lab sections?

S
Shin
9/8/2023 5:31:00 AM

please upload

P
priti kagwade
7/22/2023 5:17:00 AM

please upload the braindump for .net

R
Robe
9/27/2023 8:15:00 PM

i need this exam 1z0-1107-2. please.

C
Chiranthaka
9/20/2023 11:22:00 AM

very useful!

N
Not Miguel
11/26/2023 9:43:00 PM

for this question - "which three type of basic patient or member information is displayed on the patient info component? (choose three.)", list of conditions is not displayed (it is displayed in patient card, not patient info). so should be thumbnail of chatter photo

A
Andrus
12/17/2023 12:09:00 PM

q52 should be d. vm storage controller bandwidth represents the amount of data (in terms of bandwidth) that a vms storage controller is using to read and write data to the storage fabric.

R
Raj
5/25/2023 8:43:00 AM

nice questions

M
max
12/22/2023 3:45:00 PM

very useful

M
Muhammad Rawish Siddiqui
12/8/2023 6:12:00 PM

question # 208: failure logs is not an example of operational metadata.

S
Sachin Bedi
1/5/2024 4:47:00 AM

good questions

K
Kenneth
12/8/2023 7:34:00 AM

thank you for the test materials!

H
Harjinder Singh
8/9/2023 4:16:00 AM

its very helpful

S
SD
7/13/2023 12:56:00 AM

good questions

K
kanjoe
7/2/2023 11:40:00 AM

good questons

M
Mahmoud
7/6/2023 4:24:00 AM

i need the dumb of the hcip security v4.0 exam

W
Wei
8/3/2023 4:18:00 AM

upload the dump please

S
Stephen
10/3/2023 6:24:00 PM

yes, iam looking this

S
Stephen
8/4/2023 9:08:00 PM

please upload cima e2 managing performance dumps

H
hp
6/16/2023 12:44:00 AM

wonderful questions

P
Priyo
11/14/2023 2:23:00 AM

i used this site since 2000, still great to support my career

J
Jude
8/29/2023 1:56:00 PM

why is the answer to "which of the following is required by scrum?" all of the following stated below since most of them are not mandatory? sprint retrospective. members must be stand up at the daily scrum. sprint burndown chart. release planning.

M
Marc blue
9/15/2023 4:11:00 AM

great job. hope this helps out.

AI Tutor 👋 I’m here to help!