Citrix Virtual Apps and Desktops 7 Assessment, Design and Advanced Configurations 1Y0-403 Exam Questions in PDF

Free Citrix 1Y0-403 Dumps Questions (page: 1)

Scenario: Currently, the user interface for a Citrix Apps and Desktops environment is presented in English, but a planned on-premises expansion in Poland will support 100 new users with a requirement to use all Polish interfaces.

Two constraints were identified by a Citrix Architect:
-Network bandwidth is low and unstable.
-Network latency is higher than 300 ms to the existing Site.

How should the architect deploy Citrix Virtual Apps and Desktops for these users?

  1. Install a StoreFront server in Poland.
  2. Implement Citrix Cloud Gateway in Europe.
  3. Add a Satellite Zone to the existing Site.
  4. Create a new Site in Poland.

Answer(s): A



Scenario: A planning document for deploying a new Citrix Virtual Apps and Desktops Site specifies that it will be created with 1 Site and different zones ini each of 3 regions. The IT team expects that each zone will host 825 concurrent user sessions, with no more than 28 concurrent session launches.

What is the minimum acceptable Site-to-Site bandwidth required between the Primary Zone and a Satellite Zone?

  1. 1 Kbps
  2. 200 Mbps
  3. 2 Mbps
  4. 8 Gbps

Answer(s): C


Reference:

https://docs.citrix.com/en-us/advanced-concepts/implementation-guides/citrix-virtual-apps-desktops-zones-deep-dive.html



Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment for a company that maintains branch offices in New York, Chicago, and Miami. Management has described the following requirements for the environment:

-The Citrix Virtual Apps and Desktops Site must be located in the company headquarters in Miami.
-All users will only need to access their default local print queue from within their HDX sessions.
-Users in Chicago need access to printers hosted on a Citrix Universal Print Server located in New York.
-Printing performance and bandwidth usage must be optimized where possible.
-The environment must be highly available.
-The auto-created client printer models must function with no additional configuration needed.

Click the Exhibit button to review the printing requirements.


What does the architect need to do to meet the printing requirements for the users in Chicago?

  1. Enable the Auto-create client printers policy with ‘Auto-create all client printers’ setting enabled. Enable the Universal print driver usage policy to ‘Use universal printing only’. Apply the policy to all users. Then, install and configure the Citrix Universal Print Server components and configure the Universal Print Server policy to ‘Enabled with no fallback to Windows native remote printing’. Last, create a session printer policy, add the network printers that will use the Universal Print Server, and apply the policy to the users in Chicago.
  2. Enable the Auto-create client printers policy with ‘Auto-create all client printers’ setting enabled. Enable the Universal print driver usage policy to ‘Use universal printing only’. Apply the policy to Chicago users. Then, install and configure the Citrix Universal Print Server components and configure the Universal Print Server policy to ‘Enabled with fallback to Windows native remote printing’. Last, create a session printer policy, add the network printers that will use the Universal Print Server, and apply the policy to all users.
  3. Enable the Auto-create client printers policy with ‘Auto-create all client’s default printer only’ setting enabled. Enable the Universal print driver usage policy to ‘Use universal printing only if requested driver is unavailable’. Apply the policy to all users. Then, install and configure the Citrix Universal Print Server components and configure the Universal Print Server policy to ‘Enabled with fallback to Windows native remote printing’. Last, create a session printer policy, add the network printers that will use the Universal Print Server, and apply the policy to all users.
  4. Enable the Auto-create client printers policy with ‘Auto-create all client’s default printer only’ setting enabled. Enable the Universal print driver usage policy to ‘Use universal printing only’. Apply the policy to all users. Then, install and configure the Citrix Universal Print Server components and configure the Universal Print Server policy to ‘Enabled with fallback to Windows native remote printing’. Last, create a session printer policy, add the network printers that will use the Universal Print Server, and apply the policy to the users in Chicago.

Answer(s): D


Reference:

https://docs.citrix.com/en-us/citrix-virtual-apps-desktops/policies/reference/ica-policy-settings/printing-policy-settings/client-printers-policy-settings.html



Scenario: A Citrix Architect needs to assess a Citrix Virtual Apps and Desktops environment. The Citrix Virtual Apps and Desktops diagram in the exhibit gives details about the current Site and zone design.

Click the Exhibit button to view the diagram.

Which statement is correct if all Delivery Controllers in the Primary Zone fail?

  1. Satellite Zone 2 will be promoted and the Primary Zone Virtual Delivery Agent (VDA) machines will register within Satellite Zone 2.
  2. Virtual Delivery Agent (VDA) machines in the Primary Zone will NOT register within Satellite Zone 1 or Satellite Zone 2.
  3. Virtual Delivery Agent (VDA) machines in the Primary Zone will register within Satellite Zone 2.
  4. Virtual Delivery Agent (VDA) machines in the Primary Zone will register within Satellite Zone 1.

Answer(s): A



Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. While assessing the existing infrastructure, the architect determined that a number of users utilize legacy USB print devices that they will continue to need locally and within HDX sessions. The current HDX-optimized print virtual channel will NOT support these devices, so the architect decides that the Generic USB redirection channel should be used.

Which two factors must the architect consider when using Generic USB redirection? (Choose two.)

  1. It requires more network bandwidth compared to standard HDX virtual channels.
  2. Local access to printers will be lost until the HDX sessions is disconnected or ended.
  3. Manufacturer printer drivers will need to be installed on user workstations.
  4. The Citrix Virtual Channel Software Development Kit (VCSDK) will be required.
  5. It is supported for only USB 3.0 devices and features.

Answer(s): A,D



Viewing page 1 of 14

Share your comments for Citrix 1Y0-403 exam with other users:

C
Chere
9/15/2023 4:21:00 AM

found it good

T
Thembelani
5/30/2023 2:47:00 AM

excellent material

V
vinesh phale
9/11/2023 2:51:00 AM

very helpfull

B
Bhagiii
11/4/2023 7:04:00 AM

well explained.

R
Rahul
8/8/2023 9:40:00 PM

i need the pdf, please.

C
CW
7/11/2023 2:51:00 PM

a good source for exam preparation

A
Anchal
10/23/2023 4:01:00 PM

nice questions

J
J Nunes
9/29/2023 8:19:00 AM

i need ielts general training audio guide questions

A
Ananya
9/14/2023 5:16:00 AM

please make this content available

S
Swathi
6/4/2023 2:18:00 PM

content is good

L
Leo
7/29/2023 8:45:00 AM

latest dumps please

L
Laolu
2/15/2023 11:04:00 PM

aside from pdf the test engine software is helpful. the interface is user-friendly and intuitive, making it easy to navigate and find the questions.

Z
Zaynik
9/17/2023 5:36:00 AM

questions and options are correct, but the answers are wrong sometimes. so please check twice or refer some other platform for the right answer

M
Massam
6/11/2022 5:55:00 PM

90% of questions was there but i failed the exam, i marked the answers as per the guide but looks like they are not accurate , if not i would have passed the exam given that i saw about 45 of 50 questions from dump

A
Anonymous
12/27/2023 12:47:00 AM

answer to this question "what administrative safeguards should be implemented to protect the collected data while in use by manasa and her product management team? " it should be (c) for the following reasons: this administrative safeguard involves controlling access to collected data by ensuring that only individuals who need the data for their job responsibilities have access to it. this helps minimize the risk of unauthorized access and potential misuse of sensitive information. while other options such as (a) documenting data flows and (b) conducting a privacy impact assessment (pia) are important steps in data protection, implementing a "need to know" access policy directly addresses the issue of protecting data while in use by limiting access to those who require it for legitimate purposes. (d) is not directly related to safeguarding data during use; it focuses on data transfers and location.

J
Japles
5/23/2023 9:46:00 PM

password lockout being the correct answer for question 37 does not make sense. it should be geofencing.

F
Faritha
8/10/2023 6:00:00 PM

for question 4, the righr answer is :recover automatically from failures

A
Anonymous
9/14/2023 4:27:00 AM

question number 4s answer is 3, option c. i

P
p das
12/7/2023 11:41:00 PM

very good questions

A
Anna
1/5/2024 1:12:00 AM

i am confused about the answers to the questions. are the answers correct?

B
Bhavya
9/13/2023 10:15:00 AM

very usefull

R
Rahul Kumar
8/31/2023 12:30:00 PM

need certification.

D
Diran Ole
9/17/2023 5:15:00 PM

great exam prep

V
Venkata Subbarao Bandaru
6/24/2023 8:45:00 AM

i require dump

D
D
7/15/2023 1:38:00 AM

good morning, could you please upload this exam again,

A
Ann
9/15/2023 5:39:00 PM

hi can you please upload the dumps for sap contingent module. thanks

S
Sridhar
1/16/2024 9:19:00 PM

good questions

S
Summer
10/4/2023 9:57:00 PM

looking forward to the real exam

V
vv
12/2/2023 2:45:00 PM

good ones for exam preparation

D
Danny Zas
9/15/2023 4:45:00 AM

this is a good experience

S
SM 1211
10/12/2023 10:06:00 PM

hi everyone

A
A
10/2/2023 6:08:00 PM

waiting for the dump. please upload.

A
Anonymous
7/16/2023 11:05:00 AM

upload cks exam questions

J
Johan
12/13/2023 8:16:00 AM

awesome training material

AI Tutor 👋 I’m here to help!