Cisco Meraki Solutions Specialist 500-220 Dumps in PDF

Free Cisco 500-220 Real Questions (page: 6)

Which two features and functions are supported when using an MX appliance in Passthrough mode? (Choose two.)

  1. intrusion prevention
  2. site-to-site VPN
  3. secondary uplinks
  4. DHCP
  5. high availability

Answer(s): A,B

Explanation:

These are the two features and functions that are supported when using an MX appliance in Passthrough mode. According to the [MX Addressing and VLANs] article, Passthrough mode allows the MX appliance to act as a layer 2 bridge, passing traffic between its LAN and WAN ports without performing any routing or address translation. However, some features such as intrusion prevention and site-to-site VPN are still available in this mode.


Reference:

https://documentation.meraki.com/MX/Networks_and_Routing/ Passthrough_Mode_on_the_MX_Security_Appliance_and_Z-series_Teleworker_Gateway



Refer to the exhibit.



What are the Loss and Average Latency statistics based on?

  1. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
  2. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
  3. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
  4. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page

Answer(s): C

Explanation:

Quote from referred documentation-Link: Loss and latency will be determined over the configured IP address under Security and SD-WAN > SD-WAN and Traffic Shaping > Uplink Statistics. If no IP is configured, these values will be measured against 8.8.8.8 by default. On the WAN Health page, all the configured IP address statistics can be reviewed by changing the destination under the "Ping Destination" column.
https://documentation.meraki.com/MI/MI_WAN_Health#:~:text=Current%20loss%20and%20latenc y%20statistics,address%20is%20set%20to%208.8.



In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)

  1. Renew the Dashboard license.
  2. License a network.
  3. License more devices.
  4. Call Meraki support.
  5. Wait for the devices to auto-renew.

Answer(s): A,C

Explanation:

There are two operations in which a license can be applied, License more devices or Renew my dashboard license. This article will compare both operations and describe their behaviors. https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_- _License_More_Devices_vs_Renewal
These are the two operations that enable licenses to be applied in an organization that uses the Co- Termination licensing model. According to the Meraki Co-Termination Licensing Overview, there are two ways to add licenses to an organization:
Renewing the Dashboard license: This option allows you to extend the co-termination date of your organization by purchasing new licenses for the same or longer term as your existing licenses. You can renew your Dashboard license from the Organization > Configure > License Info page or from the Meraki Dashboard homepage.
Licensing more devices: This option allows you to add new devices to your organization by purchasing new licenses for them. You can license more devices from the Organization > Inventory page or from the Meraki Dashboard homepage.



Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)

  1. OS updates
  2. Send notification
  3. Selective wipe
  4. Screenshot
  5. Remote Desktop

Answer(s): D,E

Explanation:

https://documentation.meraki.com/SM/Monitoring_and_Reporting/MDM_Commands_in_Systems _Manager - Under Live Tools Selective Wiping is only for MacOS. Here we have Windows Laptop as well


Reference:

https://documentation.meraki.com/SM/Other_Topics/Systems_Manager_FAQ



What are two ways peers interact with ports that Auto VPN uses? (Choose two.)

  1. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
  2. Peers contact the VPN registry at UDP port 9350.
  3. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
  4. Peers contact the VPN registry at TCP port 9350.
  5. For IPsec tunneling, peers use UDP ports 500 and 4500.

Answer(s): A,B

Explanation:

Ports used to contact the VPN registry:
- Source UDP port range 32768-61000
- Destination UDP port 9350 or UDP port 9351

Ports used for IPsec tunneling:
- Source UDP port range 32768-61000
- Destination UDP port range 32768-61000

https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_- _Configuration_and_Troubleshooting


Reference:

https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_- _Configuration_and_Troubleshooting



Share your comments for Cisco 500-220 exam with other users:

M
mrtom33
11/20/2023 4:51:00 AM

i prepared for the eccouncil 350-401 exam. i scored 92% on the test.

J
JUAN
6/28/2023 2:12:00 AM

aba questions to practice

L
LK
1/2/2024 11:56:00 AM

great content

S
Srijeeta
10/8/2023 6:24:00 AM

how do i get the remaining questions?

J
Jovanne
7/26/2022 11:42:00 PM

well formatted pdf and the test engine software is free. well worth the money i sept.

C
CHINIMILLI SATISH
8/29/2023 6:22:00 AM

looking for 1z0-116

P
Pedro Afonso
1/15/2024 8:01:00 AM

in question 22, shouldnt be in the data (option a) layer?

P
Pushkar
11/7/2022 12:12:00 AM

the questions are incredibly close to real exam. you people are amazing.

A
Ankit S
11/13/2023 3:58:00 AM

q15. answer is b. simple

S
S. R
12/8/2023 9:41:00 AM

great practice

M
Mungara
3/14/2023 12:10:00 AM

thanks to this exam dumps, i felt confident and passed my exam with ease.

A
Anonymous
7/25/2023 2:55:00 AM

need 1z0-1105-22 exam

N
Nigora
5/31/2022 10:05:00 PM

this is a beautiful tool. passed after a week of studying.

A
Av dey
8/16/2023 2:35:00 PM

can you please upload the dumps for 1z0-1096-23 for oracle

M
Mayur Shermale
11/23/2023 12:22:00 AM

its intresting, i would like to learn more abouth this

J
JM
12/19/2023 2:23:00 PM

q252: dns poisoning is the correct answer, not locator redirection. beaconing is detected from a host. this indicates that the system has been infected with malware, which could be the source of local dns poisoning. location redirection works by either embedding the redirection in the original websites code or having a user click on a url that has an embedded redirect. since users at a different office are not getting redirected, it isnt an embedded redirection on the original website and since the user is manually typing in the url and not clicking a link, it isnt a modified link.

F
Freddie
12/12/2023 12:37:00 PM

helpful dump questions

D
Da Costa
8/25/2023 7:30:00 AM

question 423 eigrp uses metric

B
Bsmaind
8/20/2023 9:22:00 AM

hello nice dumps

B
beau
1/12/2024 4:53:00 PM

good resource for learning

S
Sandeep
12/29/2023 4:07:00 AM

very useful

K
kevin
9/29/2023 8:04:00 AM

physical tempering techniques

B
Blessious Phiri
8/15/2023 4:08:00 PM

its giving best technical knowledge

T
Testbear
6/13/2023 11:15:00 AM

please upload

S
shime
10/24/2023 4:23:00 AM

great question with explanation thanks!!

T
Thembelani
5/30/2023 2:40:00 AM

does this exam have lab sections?

S
Shin
9/8/2023 5:31:00 AM

please upload

P
priti kagwade
7/22/2023 5:17:00 AM

please upload the braindump for .net

R
Robe
9/27/2023 8:15:00 PM

i need this exam 1z0-1107-2. please.

C
Chiranthaka
9/20/2023 11:22:00 AM

very useful!

N
Not Miguel
11/26/2023 9:43:00 PM

for this question - "which three type of basic patient or member information is displayed on the patient info component? (choose three.)", list of conditions is not displayed (it is displayed in patient card, not patient info). so should be thumbnail of chatter photo

A
Andrus
12/17/2023 12:09:00 PM

q52 should be d. vm storage controller bandwidth represents the amount of data (in terms of bandwidth) that a vms storage controller is using to read and write data to the storage fabric.

R
Raj
5/25/2023 8:43:00 AM

nice questions

M
max
12/22/2023 3:45:00 PM

very useful

AI Tutor 👋 I’m here to help!