Cisco Implementing and Operating Service Provider Network Core Technologies (SPCOR) 350-501 Exam Questions in PDF

Free Cisco 350-501 Dumps Questions (page: 10)


1. Architecture
2. Networking
3. MPLS and Segment Routing
4. Services
5. Automation and Assurance
6. Mixed Questions

Refer to the exhibit. Which additional configuration must an engineer apply to the edge router to inject a default route into the MP-BGP address family for the Internet_Shared_Service dedicated VRF?





Answer(s): A




1. Architecture
2. Networking
3. MPLS and Segment Routing
4. Services
5. Automation and Assurance
6. Mixed Questions

Refer to the exhibit. What reestablishes the OSPF neighbor relationship between Router 1 and Router 2?

  1. OSPF process IDs match
  2. authentication is added to the configuration
  3. correct wildcard mask is used on Router 2
  4. hello intervals match

Answer(s): D




1. Architecture
2. Networking
3. MPLS and Segment Routing
4. Services
5. Automation and Assurance
6. Mixed Questions

A network engineer is deploying VRF on ASBR router R1. The interface must have connectivity over an MPLS VPN Inter-AS Option AB network. Which configuration must the engineer apply on the router to accomplish this task?





Answer(s): D




1. Architecture
2. Networking
3. MPLS and Segment Routing
4. Services
5. Automation and Assurance
6. Mixed Questions

Refer to the exhibit. ASN 64501 currently reaches the networks under the 10.0.0.0/8 prefix via the North_B router, which is a slow backup link. The administrator of ASN 64502 wants traffic from ASN 64501 to 10.0.0.0/8 to travel via the primary link, North_A.



Which change to the network configuration accomplishes this task?

  1. Set a higher local preference between North_A and South-A
  2. Set a lower MED between North_B and South_B
  3. Advertise the 10.0.0.0/8 prefix through North_B and specific subnets through North_A
  4. Set a lower Weight value for incoming traffic on North_A

Answer(s): C




1. Architecture
2. Networking
3. MPLS and Segment Routing
4. Services
5. Automation and Assurance
6. Mixed Questions



Refer to the exhibit. Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?

  1. Router 1 to be an ABR
  2. the wildcard mask network statement in OSPF of Router 2
  3. the hello timers on Router 1 and Router 2 to be different
  4. the area numbers on Router 1 and Router 2 to be similar

Answer(s): D




1. Architecture
2. Networking
3. MPLS and Segment Routing
4. Services
5. Automation and Assurance
6. Mixed Questions



Refer to the exhibit. Which two topology changes happen to the IS-IS routers? (Choose two.)

  1. R1 and R4 are Level 2 neighbors
  2. All four routers are operating as Level 1-2 routers
  3. All four routers are operating as Level 2 routers only
  4. R1 and R2 are Level 2 neighbors
  5. All four routers are operating as Level 1 routers only

Answer(s): B,D




1. Architecture
2. Networking
3. MPLS and Segment Routing
4. Services
5. Automation and Assurance
6. Mixed Questions

An engineer is trying to implement BGP in a multihomed architecture. What must the engineer configure to influence inbound path selection?

  1. A route map with AS-PATH attribute to control the inbound traffic
  2. An offset list to set the metric for routes received from neighboring autonomous systems
  3. An access list to identify traffic and enable it on both of the provider-facing interfaces
  4. A route map with WEIGHT attribute to control the inbound traffic

Answer(s): A




1. Architecture
2. Networking
3. MPLS and Segment Routing
4. Services
5. Automation and Assurance
6. Mixed Questions



Refer to the exhibit. An engineer is updating this network to meet these conditions:
Area 10 will receive inter-area routes and support mutual redistribution of external routes with the extranet.

The ::/0 route is prohibited in Area 10.

Area 11 will receive only the ::/0 route from the ABR.

External route redistribution is not supported in Area 11.

The ABR in Area 11 will advertise no interarea routes.

Which two configurations must be performed to meet the requirements? (Choose two.)

  1. Configure area 10 as nssa on R9 and XR32
  2. Configure area 11 as stub no-summary on R7 and as stub on XR31
  3. Configure area 11 as nssa no-summary on R7 and as nssa on XR31
  4. Configure area 11 as nssa default-information-originate on R7 and as nssa on XR31
  5. Configure area 10 as stub on R9 and XR32

Answer(s): A,B



Share your comments for Cisco 350-501 exam with other users:

P
PeterPan
10/18/2023 10:22:00 AM

are the question real or fake?

C
CW
7/11/2023 3:19:00 PM

thank you for providing such assistance.

M
Mn8300
11/9/2023 8:53:00 AM

nice questions

N
Nico
4/23/2023 11:41:00 PM

my 3rd purcahse from this site. these exam dumps are helpful. very helpful.

C
Chere
9/15/2023 4:21:00 AM

found it good

T
Thembelani
5/30/2023 2:47:00 AM

excellent material

V
vinesh phale
9/11/2023 2:51:00 AM

very helpfull

B
Bhagiii
11/4/2023 7:04:00 AM

well explained.

R
Rahul
8/8/2023 9:40:00 PM

i need the pdf, please.

C
CW
7/11/2023 2:51:00 PM

a good source for exam preparation

A
Anchal
10/23/2023 4:01:00 PM

nice questions

J
J Nunes
9/29/2023 8:19:00 AM

i need ielts general training audio guide questions

A
Ananya
9/14/2023 5:16:00 AM

please make this content available

S
Swathi
6/4/2023 2:18:00 PM

content is good

L
Leo
7/29/2023 8:45:00 AM

latest dumps please

L
Laolu
2/15/2023 11:04:00 PM

aside from pdf the test engine software is helpful. the interface is user-friendly and intuitive, making it easy to navigate and find the questions.

Z
Zaynik
9/17/2023 5:36:00 AM

questions and options are correct, but the answers are wrong sometimes. so please check twice or refer some other platform for the right answer

M
Massam
6/11/2022 5:55:00 PM

90% of questions was there but i failed the exam, i marked the answers as per the guide but looks like they are not accurate , if not i would have passed the exam given that i saw about 45 of 50 questions from dump

A
Anonymous
12/27/2023 12:47:00 AM

answer to this question "what administrative safeguards should be implemented to protect the collected data while in use by manasa and her product management team? " it should be (c) for the following reasons: this administrative safeguard involves controlling access to collected data by ensuring that only individuals who need the data for their job responsibilities have access to it. this helps minimize the risk of unauthorized access and potential misuse of sensitive information. while other options such as (a) documenting data flows and (b) conducting a privacy impact assessment (pia) are important steps in data protection, implementing a "need to know" access policy directly addresses the issue of protecting data while in use by limiting access to those who require it for legitimate purposes. (d) is not directly related to safeguarding data during use; it focuses on data transfers and location.

J
Japles
5/23/2023 9:46:00 PM

password lockout being the correct answer for question 37 does not make sense. it should be geofencing.

F
Faritha
8/10/2023 6:00:00 PM

for question 4, the righr answer is :recover automatically from failures

A
Anonymous
9/14/2023 4:27:00 AM

question number 4s answer is 3, option c. i

P
p das
12/7/2023 11:41:00 PM

very good questions

A
Anna
1/5/2024 1:12:00 AM

i am confused about the answers to the questions. are the answers correct?

B
Bhavya
9/13/2023 10:15:00 AM

very usefull

R
Rahul Kumar
8/31/2023 12:30:00 PM

need certification.

D
Diran Ole
9/17/2023 5:15:00 PM

great exam prep

V
Venkata Subbarao Bandaru
6/24/2023 8:45:00 AM

i require dump

D
D
7/15/2023 1:38:00 AM

good morning, could you please upload this exam again,

A
Ann
9/15/2023 5:39:00 PM

hi can you please upload the dumps for sap contingent module. thanks

S
Sridhar
1/16/2024 9:19:00 PM

good questions

S
Summer
10/4/2023 9:57:00 PM

looking forward to the real exam

V
vv
12/2/2023 2:45:00 PM

good ones for exam preparation

D
Danny Zas
9/15/2023 4:45:00 AM

this is a good experience

AI Tutor 👋 I’m here to help!