Cisco Implementing Enterprise Advanced Routing and Services (ENARSI) 300-410 Dumps in PDF

Free Cisco 300-410 Real Questions (page: 9)

Refer to the exhibit.



A network administrator reviews the branch router console log to troubleshoot the OSPF adjacency issue with the DR router.

Which action resolves this issue?

  1. Stabilize the DR site flapping link to establish OSPF adjacency.
  2. Advertise the branch WAN interface matching subnet for the DR site.
  3. Configure the WAN interface for DR site in the related OSPF area.
  4. Configure matching hello and dead intervals between sites.

Answer(s): D


Reference:

https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13699-29.html



Refer to the exhibit.



When the FastEthernet0/1 goes down, the route to 172.29.0.0/16 via 192.168.253.2 is not installed in the RIB. Which action resolves the issue?

  1. Configure feasible distance greater than the reported distance.
  2. Configure feasible distance greater than the successor's feasible distance.
  3. Configure reported distance greater than the successor's feasible distance.
  4. Configure reported distance greater than the feasible distance.

Answer(s): A


Reference:

https://www.practicalnetworking.net/stand-alone/eigrp-feasibility-condition/



Refer to the exhibit.




AS111 is receiving its own routes from AS200 causing a loop in the network.

Which configuration provides loop prevention?


  1. routerbgp 111
    neighbor 195.1.1.1 as-override
    no neighbor 195.1.2.2 allowas-in

  2. routerbgp 111
    no neighbor 195.1.1.1 allowas-in
    no neighbor 195.1.2.2 allowas-in

  3. routerbgp 111
    neighbor 195.1.2.2 as-override
    no neighbor 195.1.1.1 allowas-in

  4. routerbgp 111
    neighbor 195.1.1.1 as-override
    neighbor 195.1.2.2 as-override

Answer(s): B



Refer to the exhibit.


AS65510 iBGP is configured for directly connected neighbors. R4 cannot ping or traceroute network 192.168.100.0/24.

Which action resolves this issue?

  1. Configure R1 as a route reflector server and configure R2 and R3 as route reflector clients.
  2. Configure R4 as a route reflector server and configure R2 and R3 as route reflector clients.
  3. Configure R4 as a route reflector server and configure R1 as a route reflector client.
  4. Configure R1 as a route reflector server and configure R4 as a route reflector client.

Answer(s): D



Users report issues with reachability between areas as soon as an engineer configured summary routes between areas in a multiple area OSPF autonomous system.

Which action resolves the issue?

  1. Configure the area range command on the ASBR.
  2. Configure the summary-address command on the ASBR.
  3. Configure the summary-address command on the ABR.
  4. Configure the area range command on the ABR.

Answer(s): D



Refer to the exhibit.



Which set of commands restore reachability to loopback0?


  1. interface loopback0
    ip address 4.4.4.4 255.255.255.0
    ipospf network point-to-point

  2. interface loopback0
    ip address 4.4.4.4 255.255.255.0
    ipospf interface area 10

  3. interface loopback0
    ip address 4.4.4.4 255. 255.255.0
    ipospf network broadcast

  4. interface loopback0
    ip address 4.4.4.4 255. 255.255.0
    ipospf interface type network

Answer(s): A


Reference:

https://networkengineering.stackexchange.com/questions/13099/why-do-we-use-ospf-point-to-point-networks-for-loopbacks



AS 111 wanted to use AS 200 as the preferred path for 172.20.5.0/24 and AS 100 as the backup. After the configuration, AS 100 is not used for any other routes.





Which configuration resolves the issue?


  1. route-map SETLP permit 10
    matchip address prefix-list PLIST1
    set local-preference 99
    route-map SETLP permit 20

  2. routerbgp 111
    no neighbor 192. 168.10.1 route-map SETLP in
    neighbor 192.168.20.2 route-map SETLP in

  3. route-map SETLP permit 10
    matchip address prefix-list PLIST1
    set local-preference 110
    route-map SETLP permit 20

  4. routerbgp 111
    no neighbor 192. 168.10.1 route-map SETLP in
    neighbor 192.168.10.1 route-map SETLP out

Answer(s): A

Explanation:

There is an implicit deny all at the end of any route-map so all other traffic that does not match 172.20.5.0/24 would be dropped. Therefore, we have to add a permit sequence at the end of the route-map to allow other traffic.
The default value of Local Preference is 100 and higher value is preferred so we have to set the local preference of AS100 lower than that of AS200.



Refer to the exhibit. The ISP router is fully configured for customer A and customer B using the VRF-Lite feature.


What is the minimum configuration required for customer A to communicate between routers A1 and A2?


  1. A1
    interface fa0/0
    description To->ISP
    ip add 172.31.100.1 255.255.255.0
    no shut
    !
    routerospf 100
    net 172.31.100.1 0.0.0.255 area 0

    A2
    interface fa0/0
    description To->ISP
    ip add 172.31.200.1 255.255.255.0
    no shut
    !
    routerospf 100
    net 172.31.200.1 0.0.0.255 area 0

  2. A1
    interface fa0/0
    description To->ISP
    ipvrf forwarding A
    ip add 172.31.100.1 255.255.255.0
    no shut
    !
    routerospf 100 vrf A
    net 172.31.200.1 0.0.0.255 area 0

    A2
    interface fa0/0
    description To->ISP
    ipvrf forwarding A
    ip add 172.31.100.1 255.255.255.0
    no shut
    !
    routerospf 100 vrf A
    net 172.31.200.1 0.0.0.255 area 0

  3. A1
    interface fa0/0
    description To->ISP
    ipvrf forwarding A
    ip add 172.31.100.1 255.255.255.0
    no shut
    !
    routerospf 100
    net 172.31.100.1 0.0.0.255 area 0

    A2
    interface fa0/0
    description To->ISP
    ipvrf forwarding A
    ip add 172.31.200.1 255.255.255.0
    no shut
    !
    routerospf 100
    net 172.31.200.1 0.0.0.255 area 0

  4. A1
    interface fa0/0
    description To->ISP
    ip add 172.31.200.1 255.255.255.0
    no shut
    !
    routerospf 100
    net 172.31.200.1 0.0.0.255 area 0

    A2
    interface fa0/0
    description To->ISP
    ip add 172.31.100.1 255.255.255.0
    no shut
    !
    routerospf 100
    net 172.31.100.1 0.0.0.255 area 0

Answer(s): A



Share your comments for Cisco 300-410 exam with other users:

A
Anjum
9/23/2023 6:22:00 PM

well explained

T
Thakor
6/7/2023 11:52:00 PM

i got the full version and it helped me pass the exam. pdf version is very good.

S
sartaj
7/18/2023 11:36:00 AM

provide the download link, please

L
loso
7/25/2023 5:18:00 AM

please upload thank.

P
Paul
6/23/2023 7:12:00 AM

please can you share 1z0-1055-22 dump pls

E
exampei
10/7/2023 8:14:00 AM

i will wait impatiently. thank youu

P
Prince
10/31/2023 9:09:00 PM

is it possible to clear the exam if we focus on only these 156 questions instead of 623 questions? kindly help!

A
Ali Azam
12/7/2023 1:51:00 AM

really helped with preparation of my scrum exam

J
Jerman
9/29/2023 8:46:00 AM

very informative and through explanations

J
Jimmy
11/4/2023 12:11:00 PM

prep for exam

A
Abhi
9/19/2023 1:22:00 PM

thanks for helping us

M
mrtom33
11/20/2023 4:51:00 AM

i prepared for the eccouncil 350-401 exam. i scored 92% on the test.

J
JUAN
6/28/2023 2:12:00 AM

aba questions to practice

L
LK
1/2/2024 11:56:00 AM

great content

S
Srijeeta
10/8/2023 6:24:00 AM

how do i get the remaining questions?

J
Jovanne
7/26/2022 11:42:00 PM

well formatted pdf and the test engine software is free. well worth the money i sept.

C
CHINIMILLI SATISH
8/29/2023 6:22:00 AM

looking for 1z0-116

P
Pedro Afonso
1/15/2024 8:01:00 AM

in question 22, shouldnt be in the data (option a) layer?

P
Pushkar
11/7/2022 12:12:00 AM

the questions are incredibly close to real exam. you people are amazing.

A
Ankit S
11/13/2023 3:58:00 AM

q15. answer is b. simple

S
S. R
12/8/2023 9:41:00 AM

great practice

M
Mungara
3/14/2023 12:10:00 AM

thanks to this exam dumps, i felt confident and passed my exam with ease.

A
Anonymous
7/25/2023 2:55:00 AM

need 1z0-1105-22 exam

N
Nigora
5/31/2022 10:05:00 PM

this is a beautiful tool. passed after a week of studying.

A
Av dey
8/16/2023 2:35:00 PM

can you please upload the dumps for 1z0-1096-23 for oracle

M
Mayur Shermale
11/23/2023 12:22:00 AM

its intresting, i would like to learn more abouth this

J
JM
12/19/2023 2:23:00 PM

q252: dns poisoning is the correct answer, not locator redirection. beaconing is detected from a host. this indicates that the system has been infected with malware, which could be the source of local dns poisoning. location redirection works by either embedding the redirection in the original websites code or having a user click on a url that has an embedded redirect. since users at a different office are not getting redirected, it isnt an embedded redirection on the original website and since the user is manually typing in the url and not clicking a link, it isnt a modified link.

F
Freddie
12/12/2023 12:37:00 PM

helpful dump questions

D
Da Costa
8/25/2023 7:30:00 AM

question 423 eigrp uses metric

B
Bsmaind
8/20/2023 9:22:00 AM

hello nice dumps

B
beau
1/12/2024 4:53:00 PM

good resource for learning

S
Sandeep
12/29/2023 4:07:00 AM

very useful

K
kevin
9/29/2023 8:04:00 AM

physical tempering techniques

B
Blessious Phiri
8/15/2023 4:08:00 PM

its giving best technical knowledge

AI Tutor 👋 I’m here to help!