Cisco® 300-410 Exam (page: 16)
Cisco® Implementing Enterprise Advanced Routing and Services (ENARSI)
Updated on: 01-Sep-2025

Viewing Page 16 of 125

Refer to the exhibit. A network administrator sets up an OSPF routing protocol for a DMVPN network on the hub router.




Which configuration command is required to establish a DMVPN tunnel with multiple spokes?

  1. ipospf network point-to-point on the hub router
  2. ipospf network point-to-multipoint on one spoke router
  3. ipospf network point-to-multipoint on both spoke routers
  4. ipospf network point-to-point on both spoke routers

Answer(s): C



Refer to the exhibit. The Internet traffic should always prefer Site-A ISP-1 if the link and BGP connection are up; otherwise, all Internet traffic should go to ISP-2. Redistribution is configured between BGP and OSPF routing protocols, and it is not working as expected.


What action resolves the issue?

  1. Set OSPF Cost 200 at Site-A RTR1, and set OSPF Cost 100 at Site-B RTR2.
  2. Set metric-type 2 at Site-A RTR1, and set metric-type 1 at Site-B RTR2.
  3. Set metric-type 1 at Site-A RTR1, and set metric-type 2 at Site-B RTR2.
  4. Set OSPF Cost 100 at Site-A RTR1, and set OSPF Cost 200 at Site-B RTR2.

Answer(s): D



Refer to the exhibit. An engineer has configured R1 as EIGRP stub router. After the configuration, router R3 failed to reach to R2 loopback address.


Which action advertises R2 loopback back into the R3 routing table?

  1. Add a static route for R2 loopback address in R1 and redistribute it to advertise to R3.
  2. Use a leak map on R1 that matches the required prefix and apply it with the distribute list command toward R3.
  3. Use a leak map on R3 that matches the required prefix and apply it with the EIGRP stub feature.
  4. Add a static null route for R2 loopback address in R1 and redistribute it to advertise to R3.

Answer(s): A



Refer to the exhibit. The branch router is configured with a default route toward the Internet and has no routes configured for the HQ site that is connected through interface G2/0. The HQ router is fully configured and does not require changes.



Which configuration on the branch router makes the intranet website (TCP port 80) available to the branch office users?


  1. access-list 101 permit tcp any anyeq 80
    access-list 102 permit tcp any host intranet-webserver-ip
    !
    route-mappbr permit 10
    matchip address 101
    setip next-hop 192.168.2.2
    route-mappbr permit 20
    matchip address 102
    setip next-hop 192.168.2.2
    !
    interface G2/0
    ip policy route-map pbr

  2. access-list 100 permit tcp host intranet-webserver-ipeq 80 any
    !
    route-mappbr permit 10
    matchip address 100
    setip next-hop 192.168.2.2
    !
    interface G1/0
    ip policy route-map pbr

  3. access-list 100 permit tcp any host intranet-webserver-ipeq 80
    !
    route-mappbr permit 10
    matchip address 100
    setip next-hop 192.168.2.2
    !
    interface G2/0
    ip policy route-map pbr

  4. access-list 101 permit tcp any anyeq 80
    access-list 102 permit tcp any host intranet-webserver-ip
    !
    route-mappbr permit 10
    matchip address 101 102
    setip next-hop 192.168.2.2
    !
    interface G1/0
    ip policy route-map pbr

Answer(s): C



R1 and R2 are configured as eBGP neighbors. R1 is in AS100 and R2 is in AS200. R2 is advertising these networks to R1:

172.16.16.0/20
172.16.3.0/24
172.16.4.0/24
192.168.1.0/24
192.168.2.0/24
172.16.0.0/16

The network administrator on R1 must improve convergence by blocking all subnets of 172.16.0.0/16 major network with a mask lower than 23 from coming in.

Which set of configurations accomplishes the task on R1?


  1. ip prefix-list PL-1 deny 172.16.0.0/16 ge 23
    ip prefix-list PL-1 permit 0.0.0.0/0 le 32
    !
    routerbgp 100
    neighbor 192.168.100.2 remote-as 200
    neighbor 192.168.100.2 prefix-list PL-1 in

  2. ip prefix-list PL-1 deny 172.16.0.0/16 le 23
    ip prefix-list PL-1 permit 0.0.0.0/0 le 32
    !
    routerbgp 100
    neighbor 192.168.100.2 remote-as 200
    neighbor 192.168.100.2 prefix-list PL-1 in

  3. ip prefix-list PL-1 deny 172.16.0.0/16
    ip prefix-list PL-1 permit 0.0.0.0/0
    !
    routerbgp 100
    neighbor 192.168.100.2 remote-as 200
    neighbor 192.168.100.2 prefix-list PL-1 in

  4. access-list 1 deny 172.16.0.0 0.0.254.255
    access-list 1 permit any
    !
    routerbgp 100
    neighbor 192.168.100.2 remote-as 200
    neighbor 192.168.100.2 distribute-list 1 in

Answer(s): A



Viewing Page 16 of 125



Share your comments for Cisco® 300-410 exam with other users:

Amel Mhamdi 12/16/2022 10:10:00 AM

in the pdf downloaded is write google cloud database engineer i think that it isnt the correct exam
FRANCE


Angel 8/30/2023 10:58:00 PM

i think you have the answers wrong regarding question: "what are three core principles of web content accessibility guidelines (wcag)? answer: robust, operable, understandable
UNITED STATES


SH 5/16/2023 1:43:00 PM

these questions are not valid , they dont come for the exam now
UNITED STATES


sudhagar 9/6/2023 3:02:00 PM

question looks valid
UNITED STATES


Van 11/24/2023 4:02:00 AM

good for practice
Anonymous


Divya 8/2/2023 6:54:00 AM

need more q&a to go ahead
Anonymous


Rakesh 10/6/2023 3:06:00 AM

question 59 - a newly-created role is not assigned to any user, nor granted to any other role. answer is b https://docs.snowflake.com/en/user-guide/security-access-control-overview
Anonymous


Nik 11/10/2023 4:57:00 AM

just passed my exam today. i saw all of these questions in my text today. so i can confirm this is a valid dump.
HONG KONG


Deep 6/12/2023 7:22:00 AM

needed dumps
INDIA


tumz 1/16/2024 10:30:00 AM

very helpful
UNITED STATES


NRI 8/27/2023 10:05:00 AM

will post once the exam is finished
UNITED STATES


kent 11/3/2023 10:45:00 AM

relevant questions
Anonymous


Qasim 6/11/2022 9:43:00 AM

just clear exam on 10/06/2202 dumps is valid all questions are came same in dumps only 2 new questions total 46 questions 1 case study with 5 question no lab/simulation in my exam please check the answers best of luck
Anonymous


Cath 10/10/2023 10:09:00 AM

q.112 - correct answer is c - the event registry is a module that provides event definitions. answer a - not correct as it is the definition of event log
VIET NAM


Shiji 10/15/2023 1:31:00 PM

good and useful.
INDIA


Ade 6/25/2023 1:14:00 PM

good questions
Anonymous


Praveen P 11/8/2023 5:18:00 AM

good content
UNITED STATES


Anastasiia 12/28/2023 9:06:00 AM

totally not correct answers. 21. you have one gcp account running in your default region and zone and another account running in a non-default region and zone. you want to start a new compute engine instance in these two google cloud platform accounts using the command line interface. what should you do? correct: create two configurations using gcloud config configurations create [name]. run gcloud config configurations activate [name] to switch between accounts when running the commands to start the compute engine instances.
Anonymous


Priyanka 7/24/2023 2:26:00 AM

kindly upload the dumps
Anonymous


Nabeel 7/25/2023 4:11:00 PM

still learning
Anonymous


gure 7/26/2023 5:10:00 PM

excellent way to learn
UNITED STATES


ciken 8/24/2023 2:55:00 PM

help so much
Anonymous


Biswa 11/20/2023 9:28:00 AM

understand sql col.
Anonymous


Saint Pierre 10/24/2023 6:21:00 AM

i would give 5 stars to this website as i studied for az-800 exam from here. it has all the relevant material available for preparation. i got 890/1000 on the test.
Anonymous


Rose 7/24/2023 2:16:00 PM

this is nice.
Anonymous


anon 10/15/2023 12:21:00 PM

q55- the ridac workflow can be modified using flow designer, correct answer is d not a
UNITED STATES


NanoTek3 6/13/2022 10:44:00 PM

by far this is the most accurate exam dumps i have ever purchased. all questions are in the exam. i saw almost 90% of the questions word by word.
UNITED STATES


eriy 11/9/2023 5:12:00 AM

i cleared the az-104 exam by scoring 930/1000 on the exam. it was all possible due to this platform as it provides premium quality service. thank you!
UNITED STATES


Muhammad Rawish Siddiqui 12/8/2023 8:12:00 PM

question # 232: accessibility, privacy, and innovation are not data quality dimensions.
SAUDI ARABIA


Venkat 12/27/2023 9:04:00 AM

looks wrong answer for 443 question, please check and update
Anonymous


Varun 10/29/2023 9:11:00 PM

great question
Anonymous


Doc 10/29/2023 9:36:00 PM

question: a user wants to start a recruiting posting job posting. what must occur before the posting process can begin? 3 ans: comment- option e is incorrect reason: as part of enablement steps, sap recommends that to be able to post jobs to a job board, a user need to have the correct permission and secondly, be associated with one posting profile at minimum
UNITED KINGDOM


It‘s not A 9/17/2023 5:31:00 PM

answer to question 72 is d [sys_user_role]
Anonymous


indira m 8/14/2023 12:15:00 PM

please provide the pdf
UNITED STATES