Amazon
Anthropic
Avaya
Cisco
CompTIA
CrowdStrike
EC-Council
EXIN
Fortinet
Google
ISC
ISC2
ITIL
Juniper
Microsoft
NVIDIA
Palo Alto Networks
Salesforce
SAP
VMware
All Vendors

Amazon AWS Certified Advanced Networking - Specialty ANS-C01 ANS-C01 Dumps in PDF

Free Amazon ANS-C01 Real Questions (page: 5)

ANS-C01 PDF — 306 Questions

A company delivers applications over the internet. An Amazon Route 53 public hosted zone is the authoritative DNS service for the company and its internet applications, all of which are offered from the same domain name.

A network engineer is working on a new version of one of the applications. All the application's components are hosted in the AWS Cloud. The application has a three-tier design. The front end is delivered through Amazon EC2 instances that are deployed in public subnets with Elastic IP addresses assigned. The backend components are deployed in private subnets from RFC1918.

Components of the application need to be able to access other components of the application within the application's VPC by using the same host names as the host names that are used over the public internet. The network engineer also needs to accommodate future DNS changes, such as the introduction of new host names or the retirement of DNS entries.

Which combination of steps will meet these requirements? (Choose three.)

  1. Add a geoproximity routing policy in Route 53.
  2. Create a Route 53 private hosted zone for the same domain name Associate the application's VPC with the new private hosted zone.
  3. Enable DNS hostnames for the application's VP
  4. Create entries in the private hosted zone for each name in the public hosted zone by using the corresponding private IP addresses.
  5. Create an Amazon EventBridge (Amazon CloudWatch Events) rule that runs when AWS CloudTrail logs a Route 53 API call to the public hosted zone. Create an AWS Lambda function as the target of the rule.
    Configure the function to use the event information to update the private hosted zone.
  6. Add the private IP addresses in the existing Route 53 public hosted zone.

Answer(s): B,C,D



A company is deploying an application. The application is implemented in a series of containers in an Amazon Elastic Container Service (Amazon ECS) cluster. The company will use the Fargate launch type for its tasks. The containers will run workloads that require connectivity initiated over an SSL connection. Traffic must be able to flow to the application from other AWS accounts over private connectivity. The application must scale in a manageable way as more consumers use the application.

Which solution will meet these requirements?

  1. Choose a Gateway Load Balancer (GLB) as the type of load balancer for the ECS service. Create a lifecycle hook to add new tasks to the target group from Amazon ECS as required to handle scaling. Specify the GLB in the service definition. Create a VPC peer for external AWS accounts. Update the route tables so that the AWS accounts can reach the GLB.
  2. Choose an Application Load Balancer (ALB) as the type of load balancer for the ECS service. Create path- based routing rules to allow the application to target the containers that are registered in the target group.
    Specify the ALB in the service definition. Create a VPC endpoint service for the ALB Share the VPC endpoint service with other AWS accounts.
  3. Choose an Application Load Balancer (ALB) as the type of load balancer for the ECS service. Create path- based routing rules to allow the application to target the containers that are registered in the target group.
    Specify the ALB in the service definition. Create a VPC peer for the external AWS accounts. Update the route tables so that the AWS accounts can reach the ALB.
  4. Choose a Network Load Balancer (NLB) as the type of load balancer for the ECS service. Specify the NLB in the service definition. Create a VPC endpoint service for the NLB. Share the VPC endpoint service with other AWS accounts.

Answer(s): A



A company's development team has created a new product recommendation web service. The web service is hosted in a VPC with a CIDR block of 192.168.224.0/19. The company has deployed the web service on Amazon EC2 instances and has configured an Auto Scaling group as the target of a Network Load Balancer (NLB).

The company wants to perform testing to determine whether users who receive product recommendations spend more money than users who do not receive product recommendations. The company has a big sales event in 5 days and needs to integrate its existing production environment with the recommendation engine by then. The existing production environment is hosted in a VPC with a CIDR block of 192.168.128
.

A network engineer must integrate the systems by designing a solution that results in the least possible disruption to the existing environments.

Which solution will meet these requirements?

  1. Create a VPC peering connection between the web service VPC and the existing production VPC. Add a routing rule to the appropriate route table to allow data to flow to 192.168.224.0/19 from the existing production environment and to flow to 192.168.128.0/17 from the web service environment. Configure the relevant security groups and ACLs to allow the systems to communicate.
  2. Ask the development team of the web service to redeploy the web service into the production VPC and integrate the systems there.
  3. Create a VPC endpoint service. Associate the VPC endpoint service with the NLB for the web service.
    Create an interface VPC endpoint for the web service in the existing production VP
  4. Create a transit gateway in the existing production environment. Create attachments to the production VPC and the web service VPC. Configure appropriate routing rules in the transit gateway and VPC route tables for 192.168.224.0/19 and 192.168.128.0/17. Configure the relevant security groups and ACLs to allow the systems to communicate.

Answer(s): C



A network engineer needs to update a company's hybrid network to support IPv6 for the upcoming release of a new application. The application is hosted in a VPC in the AWS Cloud. The company's current AWS infrastructure includes VPCs that are connected by a transit gateway. The transit gateway is connected to the on-premises network by AWS Direct Connect and AWS Site-to-Site VPN. The company's on-premises devices have been updated to support the new IPv6 requirements.

The company has enabled IPv6 for the existing VPC by assigning a new IPv6 CIDR block to the VPC and by assigning IPv6 to the subnets for dual-stack support. The company has launched new Amazon EC2 instances for the new application in the updated subnets.

When updating the hybrid network to support IPv6 the network engineer must avoid making any changes to the current infrastructure. The network engineer also must block direct access to the instances' new IPv6 addresses from the internet. However, the network engineer must allow outbound internet access from the instances.

What is the MOST operationally efficient solution that meets these requirements?

  1. Update the Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Create a new VPN connection that supports IPv6 connectivity. Add an egress-only internet gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices
  2. Update the Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Update the existing VPN connection to support IPv6 connectivity. Add an egress-only internet gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices.
  3. Create a Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Create a new VPN connection that supports IPv6 connectivity. Add an egress-only internet gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices.
  4. Create a Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Create a new VPN connection that supports IPv6 connectivity. Add a NAT gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices.

Answer(s): A



A network engineer must provide additional safeguards to protect encrypted data at Application Load Balancers (ALBs) through the use of a unique random session key.

What should the network engineer do to meet this requirement?

  1. Change the ALB security policy to a policy that supports TLS 1.2 protocol only
  2. Use AWS Key Management Service (AWS KMS) to encrypt session keys
  3. Associate an AWS WAF web ACL with the ALBs, and create a security rule to enforce forward secrecy (FS)
  4. Change the ALB security policy to a policy that supports forward secrecy (FS)

Answer(s): D



A company has deployed a software-defined WAN (SD-WAN) solution to interconnect all of its offices. The company is migrating workloads to AWS and needs to extend its SD-WAN solution to support connectivity to these workloads.

A network engineer plans to deploy AWS Transit Gateway Connect and two SD-WAN virtual appliances to provide this connectivity. According to company policies, only a single SD-WAN virtual appliance can handle traffic from AWS workloads at a given time.

How should the network engineer configure routing to meet these requirements?

  1. Add a static default route in the transit gateway route table to point to the secondary SD-WAN virtual
    appliance. Add routes that are more specific to point to the primary SD-WAN virtual appliance.
  2. Configure the BGP community tag 7224:7300 on the primary SD-WAN virtual appliance for BGP routes toward the transit gateway.
  3. Configure the AS_PATH prepend attribute on the secondary SD-WAN virtual appliance for BGP routes toward the transit gateway.
  4. Disable equal-cost multi-path (ECMP) routing on the transit gateway for Transit Gateway Connect.

Answer(s): C



A company is planning to deploy many software-defined WAN (SD-WAN) sites. The company is using AWS Transit Gateway and has deployed a transit gateway in the required AWS Region. A network engineer needs to deploy the SD-WAN hub virtual appliance into a VPC that is connected to the transit gateway. The solution must support at least 5 Gbps of throughput from the SD-WAN hub virtual appliance to other VPCs that are attached to the transit gateway.

Which solution will meet these requirements?

  1. Create a new VPC for the SD-WAN hub virtual appliance. Create two IPsec VPN connections between the SD-WAN hub virtual appliance and the transit gateway. Configure BGP over the IPsec VPN connections
  2. Assign a new CIDR block to the transit gateway. Create a new VPC for the SD-WAN hub virtual appliance.
    Attach the new VPC to the transit gateway with a VPC attachment. Add a transit gateway Connect attachment. Create a Connect peer and specify the GRE and BGP parameters. Create a route in the appropriate VPC for the SD-WAN hub virtual appliance to route to the transit gateway.
  3. Create a new VPC for the SD-WAN hub virtual appliance. Attach the new VPC to the transit gateway with a VPC attachment. Create two IPsec VPN connections between the SD-WAN hub virtual appliance and the transit gateway. Configure BGP over the IPsec VPN connections.
  4. Assign a new CIDR block to the transit gateway. Create a new VPC for the SD-WAN hub virtual appliance.
    Attach the new VPC to the transit gateway with a VPC attachment. Add a transit gateway Connect attachment. Create a Connect peer and specify the VXLAN and BGP parameters. Create a route in the appropriate VPC for the SD-WAN hub virtual appliance to route to the transit gateway.

Answer(s): B



A company is deploying a new application on AWS. The application uses dynamic multicasting. The company has five VPCs that are all attached to a transit gateway Amazon EC2 instances in each VPC need to be able to register dynamically to receive a multicast transmission.

How should a network engineer configure the AWS resources to meet these requirements?

  1. Create a static source multicast domain within the transit gateway. Associate the VPCs and applicable subnets with the multicast domain. Register the multicast senders' network interface with the multicast domain. Adjust the network ACLs to allow UDP traffic from the source to all receivers and to allow UDP traffic that is sent to the multicast group address.
  2. Create a static source multicast domain within the transit gateway. Associate the VPCs and applicable subnets with the multicast domain. Register the multicast senders' network interface with the multicast domain. Adjust the network ACLs to allow TCP traffic from the source to all receivers and to allow TCP traffic that is sent to the multicast group address.
  3. Create an Internet Group Management Protocol (IGMP) multicast domain within the transit gateway.
    Associate the VPCs and applicable subnets with the multicast domain. Register the multicast senders'
    network interface with the multicast domain. Adjust the network ACLs to allow UDP traffic from the source to all receivers and to allow UDP traffic that is sent to the multicast group address.
  4. Create an Internet Group Management Protocol (IGMP) multicast domain within the transit gateway.
    Associate the VPCs and applicable subnets with the multicast domain. Register the multicast senders' network interface with the multicast domain. Adjust the network ACLs to allow TCP traffic from the source to all receivers and to allow TCP traffic that is sent to the multicast group address.

Answer(s): C



PDF
Viewing page 5 of 38

Share your comments for Amazon ANS-C01 exam with other users:

R
Ridima
9/12/2023 4:18:00 AM

need dump and sap notes for c_s4cpr_2308 - sap certified application associate - sap s/4hana cloud, public edition - sourcing and procurement

Anonymous
T
Tanvi Rajput
10/6/2023 6:50:00 AM

question 11: d i personally feel some answers are wrong.

UNITED KINGDOM
A
Anil
7/18/2023 9:38:00 AM

nice questions

Anonymous
C
Chris
8/26/2023 1:10:00 AM

looking for c1000-158: ibm cloud technical advocate v4 questions

Anonymous
S
sachin
6/27/2023 1:22:00 PM

can you share the pdf

Anonymous
B
Blessious Phiri
8/13/2023 10:26:00 AM

admin ii is real technical stuff

Anonymous
L
Luis Manuel
7/13/2023 9:30:00 PM

could you post the link

UNITED STATES
V
vijendra
8/18/2023 7:54:00 AM

hello send me dumps

Anonymous
S
Simeneh
7/9/2023 8:46:00 AM

it is very nice

Anonymous
J
john
11/16/2023 5:13:00 PM

i gave the amazon dva-c02 tests today and passed. very helpful.

Anonymous
T
Tao
11/20/2023 8:53:00 AM

there is an incorrect word in the problem statement. for example, in question 1, there is the word "speci c". this is "specific. in the other question, there is the word "noti cation". this is "notification. these mistakes make this site difficult for me to use.

Anonymous
P
patricks
10/24/2023 6:02:00 AM

passed my az-120 certification exam today with 90% marks. studied using the dumps highly recommended to all.

Anonymous
A
Ananya
9/14/2023 5:17:00 AM

i need it, plz make it available

UNITED STATES
J
JM
12/19/2023 2:41:00 PM

q47: intrusion prevention system is the correct answer, not patch management. by definition, there are no patches available for a zero-day vulnerability. the way to prevent an attacker from exploiting a zero-day vulnerability is to use an ips.

UNITED STATES
R
Ronke
8/18/2023 10:39:00 AM

this is simple but tiugh as well

Anonymous
C
CesarPA
7/12/2023 10:36:00 PM

questão 4, segundo meu compilador local e o site https://www.jdoodle.com/online-java-compiler/, a resposta correta é "c" !

UNITED STATES
J
Jeya
9/13/2023 7:50:00 AM

its very useful

INDIA
T
Tracy
10/24/2023 6:28:00 AM

i mastered my skills and aced the comptia 220-1102 exam with a score of 920/1000. i give the credit to for my success.

Anonymous
J
James
8/17/2023 4:33:00 PM

real questions

UNITED STATES
A
Aderonke
10/23/2023 1:07:00 PM

very helpful assessments

UNITED KINGDOM
S
Simmi
8/24/2023 7:25:00 AM

hi there, i would like to get dumps for this exam

AUSTRALIA
J
johnson
10/24/2023 5:47:00 AM

i studied for the microsoft azure az-204 exam through it has 100% real questions available for practice along with various mock tests. i scored 900/1000.

GERMANY
M
Manas
9/9/2023 1:48:00 AM

please upload 1z0-1072-23 exam dups

UNITED STATES
S
SB
9/12/2023 5:15:00 AM

i was hoping if you could please share the pdf as i’m currently preparing to give the exam.

Anonymous
J
Jagjit
8/26/2023 5:01:00 PM

i am looking for oracle 1z0-116 exam

UNITED STATES
S
S Mallik
11/27/2023 12:32:00 AM

where we can get the answer to the questions

Anonymous
P
PiPi Li
12/12/2023 8:32:00 PM

nice questions

NETHERLANDS
D
Dan
8/10/2023 4:19:00 PM

question 129 is completely wrong.

UNITED STATES
G
gayathiri
7/6/2023 12:10:00 AM

i need dump

UNITED STATES
D
Deb
8/15/2023 8:28:00 PM

love the site.

UNITED STATES
M
Michelle
6/23/2023 4:08:00 AM

can you please upload it back?

Anonymous
A
Ajay
10/3/2023 12:17:00 PM

could you please re-upload this exam? thanks a lot!

Anonymous
H
him
9/30/2023 2:38:00 AM

great about shared quiz

Anonymous
S
San
11/14/2023 12:46:00 AM

goood helping

Anonymous
AI Tutor 👋 I’m here to help!