AACN CCRN (Adult) - Direct Care Eligibility Pathway CCRN Exam Questions in PDF

Free AACN CCRN Dumps Questions (page: 5)

Potentially life-threatening consequences of diabetic ketoacidosis (DKA) include

  1. cellular dehydration.
  2. intracellular hyperglycemia.
  3. metabolic alkalosis.
  4. respiratory alkalosis.

Answer(s): A

Explanation:





Cellular dehydration is one of the potentially life-threatening consequences of diabetic ketoacidosis (DKA), which is a condition that occurs when the body does not have enough insulin to use glucose for energy and starts to break down fat instead. This produces ketones, which are acidic substances that accumulate in the blood and urine. DKA causes hyperglycemia, which is a high level of glucose in the blood, and osmotic diuresis, which is the loss of water and electrolytes through the urine. This leads to cellular dehydration, which is the shrinkage of the cells due to the loss of water from the intracellular fluid. Cellular dehydration can affect the brain and cause neurological symptoms, such as confusion, lethargy, coma, and death.
Other potentially life-threatening consequences of DKA include metabolic acidosis, which is a low pH of the blood due to the excess of ketones, and respiratory compensation, which is the increase of the breathing rate and depth to expel carbon dioxide and lower the acidity of the blood.
These are not the same as metabolic alkalosis or respiratory alkalosis, which are conditions that cause a high pH of the blood due to the loss of acids or the retention of bases.
Intracellular hyperglycemia is not a consequence of DKA, as the glucose cannot enter the cells without insulin and remains in the extracellular fluid.



Postoperatively, symptoms that may indicate hemothorax or internal bleeding in a video-assisted thoracic surgery (VATS) patient include

  1. diminished breath sounds.
  2. pain with deep inspiration.
  3. bradycardia.
  4. hypertension.

Answer(s): A

Explanation:



Diminished breath sounds are one of the symptoms that may indicate hemothorax or internal bleeding in a video-assisted thoracic surgery (VATS) patient. VATS is a minimally invasive surgical technique that uses a small video camera (thoracoscope) and special instruments to access the chest cavity through small incisions.
Hemothorax is a condition where blood accumulates in the pleural space, the area between the lungs and the chest wall.
Hemothorax can occur as a complication of VATS due to injury to the lung, blood vessels, or chest wall during the procedure.
Hemothorax can cause compression of the lung and reduce its expansion, leading to diminished breath sounds on the affected side.
Other symptoms of hemothorax may include chest pain, shortness of breath, low blood pressure, rapid heart rate, and pale or clammy skin.
Internal bleeding is another possible complication of VATS that can cause similar symptoms as hemothorax. Internal bleeding can occur due to damage to the major vessels, such as the aorta, pulmonary artery, or vena cava, during VATS. Internal bleeding can cause hypovolemia, which is a decrease in the volume of blood in the body, and hypoxemia, which is a low level of oxygen in the blood. These conditions can impair the delivery of oxygen to the tissues and organs, including the lungs, and cause diminished breath sounds, as well as other signs of shock, such as confusion, weakness, dizziness, and loss of consciousness.
Pain with deep inspiration, bradycardia, and hypertension are not typical symptoms of hemothorax or internal bleeding in a VATS patient. Pain with deep inspiration may be a normal postoperative finding after VATS, as the incisions and the chest tube may cause discomfort. Bradycardia and hypertension may be caused by other factors, such as medications, cardiac disorders, or neurological conditions, but they are not directly related to hemothorax or internal bleeding .


Reference:

1: Video-Assisted Thoracoscopic Surgery (VATS) | Johns Hopkins Medicine
2: Hemothorax: Causes, Symptoms, Diagnosis & Treatment - Cleveland Clinic2
3: Complications of video-assisted thoracoscopic surgery: a retrospective analysis of 3000 cases - PubMed

: Major vascular complications after video-assisted thoracoscopic surgery: a case report and literature review - PubMed
: Video-Assisted Thoracoscopic Surgery (VATS) | Michigan Medicine : Bradycardia - Symptoms and causes - Mayo Clinic
: High blood pressure (hypertension) - Symptoms and causes - Mayo Clinic



A patient who is post repair of an abdominal aortic aneurysm should be monitored for which of the following complications?

  1. acute renal failure
  2. acute hepatic dysfunction
  3. acute CVA
  4. atrial fibrillation

Answer(s): A

Explanation:





Acute renal failure is one of the possible complications of abdominal aortic aneurysm (AAA) repair, especially after open surgery. Acute renal failure is a sudden loss of kidney function that can cause fluid and electrolyte imbalance, acid-base disturbance, and uremic syndrome. Acute renal failure can occur due to several factors, such as hypoperfusion of the kidneys, atheroembolism, contrast- induced nephropathy, or ischemia-reperfusion injury.
The incidence of acute renal failure after AAA repair ranges from 2 to 25%, depending on the definition, the type of surgery, and the patient's risk factors.
Acute renal failure is associated with increased morbidity, mortality, and length of hospital stay after AAA repair.

Other complications of AAA repair include bleeding, infection, wound complications, graft-related complications, bowel ischemia, spinal cord ischemia, and cardiac, pulmonary, or neurological events.
Acute hepatic dysfunction, acute CVA, and atrial fibrillation are not specific complications of AAA repair, but they may occur in any major surgery or in patients with preexisting conditions.



A patient with hypertension received tPA for an acute embolic stroke with complete resolution of symptoms. Twenty-four hours after tPA administration, the nurse should anticipate an order for

  1. diuretics.
  2. beta blockers.
  3. antiplatelet agents.
  4. calcium channel blockers.

Answer(s): C



A 22-year-old trauma patient sustained multiple fractures after a fall. The patient fell 50 feet from a cliff while rock climbing without a harness. The patient is intubated and sedated with casts to bilateral lower extremities. The nurse should recognize that young adults are

  1. more likely to engage in risk-taking behaviors.
  2. developmentally vulnerable to peer pressure in extreme sports.
  3. working through trust issues that cause them to test limits.
  4. influenced by long-time intervals spent in virtual reality.

Answer(s): A



In septic shock, a mixed venous O2 saturation (SO2) of 84% indicates that

  1. O2 delivery to tissues is inadequate due to shunting.
  2. the mixed venous pO2 is low.
  3. venous pO2 and saturation are irrelevant to tissue perfusion.
  4. the tissue cells are being well oxygenated.

Answer(s): D

Explanation:

A high mixed venous O2 saturation (SO2) indicates that the tissue cells are not extracting enough oxygen from the blood, which can be due to impaired cellular metabolism or increased oxygen delivery. In septic shock, there is often a mismatch between oxygen delivery and consumption, resulting in a high SO2 despite tissue hypoxia. Therefore, SO2 alone is not a reliable indicator of tissue perfusion in septic shock.


Reference:

Mixed venous oxygen saturation (SvO2) monitoring · LITFL · CCC SvO2 to monitor resuscitation of septic patients: let's just understand the basic physiology | Critical Care | Full Text
Reference Guide for CCRN (Adult), page 14.



A patient with a history of COPD is admitted with increasing dyspnea and fatigue. O2 is initiated via nasal cannula at 4 L/min with an O2 saturation of 99%. One hour later, the patient becomes lethargic.
Which of the following is the most likely cause for the change in the patient's mental status?

  1. O2 toxicity
  2. absorption atelectasis
  3. depressed hypoxic drive
  4. decreased end-tidal CO2

Answer(s): C

Explanation:

A patient with COPD may have a chronically elevated PaCO2 and rely on hypoxia as the main stimulus for breathing. If the patient receives too much oxygen, this may reduce the hypoxic drive and cause respiratory depression, leading to lethargy and hypercapnia. O2 toxicity, absorption atelectasis, and decreased end-tidal CO2 are unlikely to occur with 4 L/min of O2 via nasal cannula in a short period of time.


Reference:

Reference Guide for CCRN (Adult), page 14.

Oxygen Saturation Target of 88-92% in COPD: Evidence-based Medicine?



A patient is admitted following a motor vehicle crash. A fluid challenge is initiated immediately after assessing a BP of 80/palpable. Fifteen minutes later,
vital signs are as follows:
BP
HR 150
RR 36
The most appropriate action should be to

  1. administer a vasopressor.
  2. administer a second fluid challenge.
  3. request a CT scan of the chest.
  4. request an abdominal ultrasound.

Answer(s): B



Share your comments for AACN CCRN exam with other users:

A
AI Tutor Explanation
5/15/2026 9:49:16 AM

Question 5:
I can’t see the [Image] in Question 5, but I can explain the likely reasoning.

  • Correct components: SAS adapter and disk (options B and D).
  • Why: This question is about diagnosing a storage-path issue inside the node. The SAS adapter connects disks to the controller, and the disks themselves are where I/O problems or failures usually originate. The cluster switches and network interface cards are more related to the network path rather than the direct storage path, unless the symptom points to a network fault.

How to examine these two components:
  • SAS adapter
- Check link status and port mapping. - Verify firmware version and compatibility. - Inspect cabling to disk shelves and any expanders. - Look for adapter errors in system logs.
  • Disk
- Check health status for each disk (fail/degraded, SMART data). - Inspect LEDs on the disk and shelf. - Review reallocation, pending operations, and overall disk state with storage commands/logs. - Confirm hot spares and disk replacement readiness.
If you want, I can walk through the exact commands you’d use in ONTAP or a CLI.

A
AI Tutor Explanation
5/14/2026 11:59:47 AM

Question 12:
Here’s why Question 12’s correct choices are C and D.

  • C (Azure DevOps, build and upload to asset library)
- What it means: Create a deployable package from a branch in Azure DevOps, then use an LCS asset upload step to push that package into the Dynamics 365 F&O asset library. - Why it’s valid: This is a standard path to prepare and publish a deployable package to LCS for deployment.
  • D (Visual Studio, create deployment package and upload)
- What it means: Use Visual Studio to generate a Dynamics 365 deployment package, then upload that package to the LCS asset library. - Why it’s valid: Visual Studio can produce the deployable package, which is what LCS expects in the asset library.
Why A and B are not correct:
  • A: Visual Studio export the project and upload to asset library
- You don’t export a project to the asset library; you export a deployable package and upload that.
  • B: Azure DevOps, queue a build and upload the model to the asset library
- The asset library stores deployable packages, not models. You upload a package, not a model.

A
AI Tutor Explanation
5/14/2026 11:49:11 AM

Question 3:
Question 3 asks for two valid ways to meet the purchase order creation validation (warn if the vendor is on the exclusion list for the customer/product and block/alert accordingly).
Correct answers: C and D

  • C: In Application Explorer, create a form extension and implement validation.
- Extend the Purchase Order creation form and add validation logic (e.g., before save/submit) to check VendExclusions for the customer/item and show a warning or block the PO as needed.
  • D: Implement Chain of Command (CoC) and method wrapping by creating a form extension class.
- Use CoC to wrap the target PO creation method, perform the exclusion check after calling super(), and enforce the rule (warning or prevent creation).
Why not A or B?
  • A (class with a form data source event handler) is not the standard pattern for this UI-level validation scenario and is less direct for enforcing creation-time behavior.
  • B (table extension with validation) cannot sufficiently enforce the UI-level workflow or trigger user-facing warnings during PO creation.

So, the two valid techniques are C and D, reflecting the recommended form-extension patterns: direct form validation and CoC-based method wrapping.

A
AI Tutor Explanation
5/14/2026 11:42:28 AM

Question 12:
Here’s how to understand question 12.

  • What the question asks: Two valid ways to prepare and deploy a software deployable package to a test environment (via the asset library in LCS).

  • The correct options: C and D.

- C: In Azure DevOps, queue a build from the corresponding branch to produce a deployable package, then upload that package to the LCS asset library. This uses a release/build workflow and requires an LCS connection set up in Azure DevOps.
- D: In Visual Studio, create a Dynamics 365 deployment package using the dev tools, then upload that deployable package to the LCS asset library. This is the Visual Studio–based path to generate and publish a deployable package.
  • Why A and B are not correct:

- A: Exporting the project from Visual Studio and uploading the project itself to the asset library isn’t the correct artifact; the asset library expects a deployable package, not a raw project export.
- B: Queuing a build and “uploading the model” to the asset library isn’t the standard deployable package workflow; the target artifact should be a deployable package, not a model file.
Key concept: Deployable packages are published to the LCS Asset Library, and you can create them either from Visual Studio or from Azure DevOps as part of a build/release pipeline.

A
AI Tutor Explanation
5/13/2026 11:23:34 PM

Question 6:
Here’s how question 6 works.
Key constraint: All new and extended objects must be in an existing model named FinanceExt. Creating a brand-new model is not allowed.
Why the two correct options work:

  • B. Overlay the existing FinanceExt model and populate the solution definition.
- This keeps all changes inside FinanceExt by overlaying the base model with your solution details.
  • C. Extend the existing FinanceExt model and populate the project model definition.
- This uses the extension approach to add your changes while still residing in FinanceExt, organized via the project model definition.
Why the other options are not correct:
  • A. Create a new model that extends the existing FinanceExt model.
- Not allowed, since no new models may be created.
  • D. Modify DefaultModelForNewProject and name the model FinanceExt.
- The goal is to place changes in FinanceExt, not to name or create a new model via config; this doesn’t describe a valid way to satisfy the constraint.
In short: use B or C; both keep changes inside the existing FinanceExt model.

A
AI Tutor Explanation
5/13/2026 11:00:29 PM

Question 2:
I don’t have the text for Question 2 here. Please paste the exact Question 2 (including all answer choices) or describe the topic it covers.
Once I have it, I’ll:

  • Identify the exam objective it targets.
  • Break down the stem and each option.
  • Use elimination and key concepts to justify why options are correct or incorrect.
  • Give the final answer with a concise explanation of the reasoning.

If there’s an image in Question 2, describe it or transcribe any text shown.

A
AI Tutor Explanation
5/10/2026 12:51:57 AM

Which statement is true about using default environment variables? The environment variables can be read in workflows using the ENV: variable_name syntax. The environment variables created should be prefixed with GITHUB_ to ensure they can be accessed in workflows The environment variables can be set in the defaults: sections of the workflow The GITHUB_WORKSPACE environment variable should be used to access files from within the runner.
Correct answer: The statement "The GITHUB_WORKSPACE environment variable should be used to access files from within the runner." is true.
Why the others are false:

  • ENV: variable_name syntax is not how you read env vars in workflows. Use ${{ env.VARIABLE }} in expressions or $VARIABLE in a shell.
  • Environment variables don’t need a GITHUB_ prefix. Custom vars can have any name; GITHUB_ is only for built-in, predefined vars.
  • defaults: cannot set environment variables. It configures defaults for run steps (like shell or working-directory), not env vars.

Extra tip:
  • GITHUB_WORKSPACE (or ${{ github.workspace }}) is the root path on the runner where the repository is checked out. Use it to access files, e.g., $GITHUB_WORKSPACE/... or ${{ github.workspace }}/....

A
AI Tutor Explanation
5/7/2026 11:34:48 PM

As an administrator for this subscription, you have been tasked with recommending a solution that prohibits users from copying corporate information from managed applications installed on unmanaged devices. Which of the following should you recommend? Windows Virtual Desktop. Microsoft Intune. Windows AutoPilot. Azure AD Application Proxy.

  • Microsoft Intune

Reason: Intune can enforce app protection policies (MAM) on managed apps, even on unmanaged devices, to prevent data leakage (e.g., restricting copy/paste, saving to non-approved apps, etc.). The other options don’t address data protection within apps on unmanaged devices.

A
AI Tutor Explanation
5/4/2026 2:43:10 AM

Question 34:

  • Question 34 asks: Which role(s) has the capability to create Policies? Choose two.
  • Likely correct roles: Compliance Manager and Compliance admin (A and B). These roles typically have policy governance rights to create and manage policies.
  • Why not the others: Compliance User is usually a limited user, not allowed to create policies. Risk Manager focuses on risks, not policy creation in standard setups.
  • Note on the provided key: The answer shown is “C” (Compliance User), which conflicts with “Choose two.” This is probably a key error. In practice, verify against your instance’s ACLs or official docs.
  • Quick check tip: In ServiceNow, review the ACLs and role permissions for the Policy records to see which roles can create policies.

A
AI Tutor Explanation
4/29/2026 11:59:58 PM

function of appnav in sdwan

  • AppNav (Application Navigation) is the Cisco SD-WAN feature that provides application-level visibility and control.
  • It maintains a catalog of applications (AppIDs) with attributes (ports/protocols, categories) and classifies traffic accordingly.
  • It allows policy authors to reference apps by name in policies, enabling application-aware routing, QoS, and service chaining based on the app’s requirements.
  • The SD-WAN fabric uses AppNav data to steer traffic along the best path, improving user experience for critical apps while optimizing WAN usage.

A
AI Tutor Explanation
4/29/2026 5:25:25 AM

Question 1:

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct

A
AI Tutor Explanation
4/29/2026 5:23:14 AM

Question 5:

  • Correct answer: A. User4 and User1 only

  • Why this is correct:
- The Automatic Enrollment setting in Intune has MDM user scope: GroupA. Only users in GroupA can enroll devices via MDM auto-enrollment. - Device6 will be enrolled via Windows Autopilot and Intune, so enrollment is allowed only for users in GroupA. - Based on the group memberships in the scenario, User4 and User1 are in GroupA, while User2 and User3 are not. Therefore only User4 and User1 can enroll Device6.
  • Quick tip for the exam:
- Remember: MDM user scope determines who can auto-enroll devices; MAM scope controls app protection enrollment. When a new Autopilot device is enrolled, the signing-in user must be in the MDM scope.

A
AI Tutor Explanation
4/29/2026 5:17:10 AM

Why this is correct

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct:
- Windows Autopilot requires devices to be registered by their hardware IDs (hash) before Autopilot can deploy Windows 10 Enterprise. - Collect the hardware IDs from the new Phoenix machines, save them in a CSV, and upload that CSV in the Intune/Windows Autopilot area. This maps each device to an Autopilot deployment profile. - After registration, you can assign Autopilot profiles (Windows 10 Enterprise, etc.). Other options (serial number CSV, generalizing, or Mobility settings) are not the initial Autopilot registration steps.

A
AI Tutor Explanation
4/25/2026 1:53:46 PM

Question 7:

  • Correct answer: B — A risk score is computed based on the number of remediations needed compared to the industry peer average.

Explanation:
  • Risk360 uses a remediation-based score. It benchmarks how many actions are required to fix issues against peers, giving a relative risk posture.
  • Why not the others:
- A: Not just total risk events by location. - C: Time to mitigate isn’t the primary scoring method. - D: Not a four-stage breach scoring approach.
Note: The page text shows a mismatch (it lists D as the answer), but the study guide describes the remediation-based scoring (B) as the correct concept.

A
AI Tutor Explanation
4/25/2026 1:42:20 PM

Question 104:

  • Correct answer: D) Multi-Terabyte (TB) Range

  • Brief explanation:
- clustering keys organize data into micro-partitions to improve pruning when queries filter on those columns. - The performance benefit is most significant for very large tables; for small tables the overhead of maintaining clustering outweighs gains. - Therefore, as a best practice, define clustering keys on tables at the TB scale.

C
Community Helper
4/25/2026 2:03:10 AM

Q23: Fabric Admin is correct. Because Domain admin cannot create domains. Only Fabric Admin can among the given options. Q51: Wrapping @pipeline.parameter.param1 inside {} will return a string. But question requires the expression to return Int, so correct answer should be @pipeline.parameter.param1 (no {})

A
AI Tutor Explanation
4/23/2026 3:07:03 PM

Question 62:

  • Correct answer: D (per the page)

  • Note: The explanation text on the page describes option B (use ZDX score and Analyze Score to trigger the Y Engine analysis), indicating a mismatch between the stated answer and the rationale.

  • Key concept: For fast root-cause analysis, leverage telemetry and auto-correlated insights:
- Use the user’s ZDX score for AWS and run Analyze Score to activate the Y Engine, which correlates metrics across network, client, and application to pinpoint the issue quickly.
  • Why the other options are less effective:
- A: Only checks for outages; doesn’t provide actionable root-cause analysis. - C: Deep Trace helps visibility but is manual and time-consuming. - D: Packet capture is invasive and slow; not the quickest path to root cause.

A
AI Tutor Explanation
4/23/2026 12:26:21 PM

Question 32:

  • Answer: A (2.4GHz)

  • Why: Lower-frequency signals have longer wavelengths and experience less attenuation when passing through walls and obstacles. Higher frequencies (5GHz, 6GHz) are more easily blocked by walls. NFC operates over very short distances and is not meant to penetrate walls. So 2.4 GHz best penetrates physical objects like walls.

A
AI Tutor Explanation
4/21/2026 8:48:36 AM

Question 3:

  • False is the correct answer (Option B).

Why:
  • In Snowflake, a database is a metadata object that exists within a single Snowflake account. Accounts are isolated—there isn’t one database that lives in multiple accounts.
  • You can access data across accounts via data sharing or database replication, but these create separate database objects in the other accounts (e.g., a database in the consumer account created from a share), not a single shared database across accounts.

So a single database cannot exist in more than one Snowflake account.

A
Anonymous User
4/16/2026 10:54:18 AM

Question 1:

  • Correct answer: Edate = sys.argv[1]
  • Why this is correct:
- When a Databricks Job passes parameters to a notebook, those parameters are supplied to the notebook's Python process as command-line arguments. The first argument after the script name is sys.argv[1], so date = sys.argv[1] captures the passed date value directly.
  • How it compares to other options:
- date = spark.conf.get("date") reads from Spark config, not from job parameters. - input() waits for user input at runtime, which isn’t how job parameters are provided. - date = dbutils.notebooks.getParam("date") would work if the notebook were invoked via dbutils.notebook.run with parameters, not

A
Anonymous User
4/15/2026 4:42:07 AM

Question 528:

  • Correct answer: NSG flow logs for NSG1 (Option B)

  • Why:
- Traffic Analytics uses NSG flow logs to analyze traffic patterns. You must have NSG flow logs enabled for the NSGs you want to monitor. - An Azure Log Analytics workspace is also required to store and query the traffic data. - Network Watcher must be available in the subscription for traffic analytics to function.
  • What to configure (brief steps):
- Ensure Network Watcher is enabled in the East US region (for the subscription/region). - Enable NSG flow logs on NSG1. - Ensure a Log Analytics workspace exists and is accessible (read/write) so Traffic Analytics can store and query logs.
  • Why other options aren’t correct:
- “Diagnostic settings for VM1” or “Diagnostic settings for NSG1” alone don’t guarantee flow logs are captured and sent to Log Analytics, which Traffic Analytics relies on. - “Insights for VM1” is not how Traffic Analytics collects traffic data.

A
Anonymous User
4/15/2026 2:43:53 AM

Question 23:
The correct answer is Domain admin (option B), not Fabric admin.

  • Domain admin provides domain-level management: create domains/subdomains and assign workspaces within those domains, which matches the tasks while following least privilege.
  • Fabric admin is global-level access and is more privileges than needed for this scenario (it would grant broader control across the Fabric environment).

A
Anonymous User
4/14/2026 12:31:34 PM

Question 2:
For question 2, the key concept is the Longest Prefix Match. Routers pick the route whose subnet mask is the most specific (largest prefix length) that still matches the destination IP.
From the options:

  • A) 10.10.10.0/28 ? 10.10.10.0–10.10.10.15
  • B) 10.10.13.0/25 ? 10.10.13.0–10.10.13.127
  • C) 10.10.13.144/28 ? 10.10.13.144–10.10.13.159
  • D) 10.10.13.208/29 ? 10.10.13.208–10.10.13.215

The destination Host A’s IP must fall within 10.10.13.208–10.10.13.215 for the /29 to be the best match. Since /29 is the longest prefix among the matching options, Router1 will use 10.10.13.208/29.
Thus, the correct answer is D.

S
srameh
4/14/2026 10:09:29 AM

Question 3:

  • Correct answer: Phase 4, Post Accreditation

  • Explanation:
- In DITSCAP, the four phases are: - Phase 1: Definition (concept and requirements) - Phase 2: Verification (design and testing) - Phase 3: Validation (fielding and evaluation) - Phase 4: Post Accreditation (ongoing operations and lifecycle management) - The description—continuing operation of an accredited IT system and addressing changing threats throughout its life cycle—fits the Post Accreditation phase, which covers operations, maintenance, monitoring, and reauthorization as threats and environment evolve.

O
onibokun10
4/13/2026 7:50:14 PM

Question 129:
Correct answer: CNAME

  • A CNAME record creates an alias for a domain, so newapplication.comptia.org will resolve to whatever IP address www.comptia.org resolves to. This ensures both names point to the same resource without duplicating the IP.
  • Why not the others:
- SOA defines authoritative information for a zone. - MX specifies mail exchange servers. - NS designates name servers for a zone.
  • Notes: The alias name (newapplication.comptia.org) should not have other records if you use a CNAME for it, and CNAMEs aren’t used for the zone apex (root) domain. This scenario uses a subdomain, so a CNAME is appropriate.

A
Anonymous User
4/13/2026 6:29:58 PM

Question 1:

  • Correct answer: C

  • Why this is best:
- Uses OS Login with IAM, so SSH access is granted via Google accounts rather than distributing per-user SSH keys. - Granting the compute.osAdminLogin role to a Google group gives admin access to all team members in a centralized, auditable way. - Access is auditable: Cloud Audit Logs show who accessed which VM, satisfying the security requirement to determine who accessed a given instance.
  • How it works:
- Enable OS Login on the project/instances (enable-oslogin metadata). - Add the team’s

A
Anonymous User
4/13/2026 1:00:51 PM

Question 2:

  • Answer: D. Azure Advisor

  • Why: To view security-related recommendations for resources in the Compute and Apps area (including App Service Web Apps and Functions), you use Azure Advisor. Advisor surfaces personalized best-practice recommendations across resources, including security, and shows which resources are affected and the severity.

  • Why not the others:
- Azure Log Analytics is for ad-hoc querying of telemetry, not for viewing security recommendations. - Azure Event Hubs is for streaming telemetry data, not for security recommendations.
  • Quick tip: In the portal, navigate to Azure Advisor and check the Security recommendations for App Services to see actionable items and affe

D
Don
4/11/2026 5:36:42 AM

Recommend using AI for Solutions rather the Answer(s) submitted here

M
Mogae Malapela
4/8/2026 6:37:56 AM

This is very interesting

A
Anon
4/6/2026 5:22:54 PM

Are these the same questions you have to pay for in ExamTopics?

L
LRK
3/22/2026 2:38:08 PM

For Question 7 - while the answer description indicates the correct answer, the option no. mentioned is incorrect. Nice and Comprehensive. Thankyou

R
Rian
3/19/2026 9:12:10 AM

This is very good and accurate. Explanation is very helpful even thou some are not 100% right but good enough to pass.

G
Gerrard
3/18/2026 6:58:37 AM

The DP-900 exam can be tricky if you aren't familiar with Microsoft’s specific cloud terminology. I used the practice questions from free-braindumps.com and found them incredibly helpful. The site breaks down core data concepts and Azure services in a way that actually mirrors the real test. As a resutl I passed my exam.

V
Vineet Kumar
3/6/2026 5:26:16 AM

interesting

AI Tutor 👋 I’m here to help!