Energy simu-lation software used for ENERGY STAR Homes certification is approved by the:
Answer(s): D
The LEED for Homes Rating System (v4) integrates ENERGY STAR Homes certification as part of the Energy and Atmosphere (EA) category, specifically for the EA Prerequisite: Minimum Energy Performance and EA Credit: Annual Energy Use. ENERGY STAR Homes certification requires energy simulation software to model the home's performance, and this software must be approved by a specific authority.According to the LEED Reference Guide for Homes Design and Construction (v4):EA Prerequisite: Minimum Energy PerformanceProjects pursuing ENERGY STAR for Homes certification must use energy simulation software accredited by the Residential Energy Services Network (RESNET) to demonstrate compliance with ENERGY STAR performance requirements.Source: LEED Reference Guide for Homes Design and Construction, v4, Energy and Atmosphere Prerequisite: Minimum Energy Performance, p. 112.The Residential Energy Services Network (RESNET) is the organization responsible for accrediting energy modeling software used for ENERGY STAR Homes certification, such as REM/Rate or Ekotrope. RESNET establishes standards for Home Energy Rating Systems (HERS) and ensures software accuracy for energy performance calculations.The LEED v4.1 Residential BD+C rating system aligns with this:EA Prerequisite: Energy PerformanceENERGY STAR Homes certification requires the use of RESNET-accredited energy modeling tools to verify performance targets, such as HERS index scores. Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online. While the Environmental Protection Agency (EPA) oversees the ENERGY STAR program, it does not directly approve the simulation software; that responsibility lies with RESNET.Why not the other options?A . Department of Energy (DOE): The DOE supports energy efficiency programs but does not accredit software for ENERGY STAR Homes. It may be involved in broader standards (e.g., EnergyPlus), but RESNET handles ENERGY STAR software.
LEED Reference Guide for Homes Design and Construction, v4, EA Prerequisite: Minimum Energy Performance, p. 112.B . U.S. Green Building Council (USGBC): The USGBC administers LEED but does not approve ENERGY STAR software. It references ENERGY STAR requirements in LEED credits. LEED Reference Guide for Homes Design and Construction, v4, EA Prerequisite: Minimum Energy Performance, p. 112.C . Environmental Protection Agency (EPA): The EPA manages ENERGY STAR but delegates software accreditation to RESNET for consistency in HERS ratings. ENERGY STAR Residential New Construction Program Requirements, accessed via www.energystar.gov.The LEED AP Homes Candidate Handbook emphasizes EA prerequisites and credits, including ENERGY STAR integration, and references the LEED Reference Guide for Homes Design and Construction as a key resource. The exam is based on LEED v4, ensuring the relevance of RESNET's role.LEED Reference Guide for Homes Design and Construction, v4, USGBC, Energy and Atmosphere Prerequisite: Minimum Energy Performance, p. 112.LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits).LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4). RESNET Standards, accessed via www.resnet.us, confirming software accreditation.
A gut rehab LEED for Homes project will maintain the building's existing exterior wall and floor framing. Under Materials and Resources Credit, Environmentally Preferable Products category, these components get credit for being:
Answer(s): B
The LEED for Homes Rating System (v4) awards points for the Materials and Resources (MR) Credit:Environmentally Preferable Products for using materials with sustainable attributes, such as reused or salvaged materials. In a gut rehab project, maintaining existing exterior wall and floor framing qualifies these components as reused materials.According to the LEED Reference Guide for Homes Design and Construction (v4):MR Credit: Environmentally Preferable Products (14 points) Use products that meet one or more of the following criteria for at least 25%, 50%, or 90% (by cost) of the total materials:Reused or salvaged materials: Materials that are reclaimed from the same or another project, such as existing framing maintained in a gut rehab.In gut rehab projects, existing structural components (e.g., wall and floor framing) that are reused in place qualify as reclaimed materials.Source: LEED Reference Guide for Homes Design and Construction, v4, Materials and Resources Credit: Environmentally Preferable Products, p. 160.The LEED v4.1 Residential BD+C rating system confirms:MR Credit: Environmentally Preferable ProductsReclaimed materials, such as existing framing reused in gut rehab projects, contribute to the percentage of environmentally preferable products based on their cost. Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online. The term reclaimed (Option B) is used in LEED to describe materials that are reused or salvaged, such as existing framing kept in place during a gut rehab. This reduces the demand for new materials and aligns with the credit's intent.Why not the other options?A . Recycled: Recycled materials contain pre- or post-consumer recycled content (e.g., fly ash in concrete). Existing framing is not recycled but reused in its original form, so it does not qualify as recycled.
LEED Reference Guide for Homes Design and Construction, v4, MR Credit:Environmentally Preferable Products, p. 160.C . Refurbished: Refurbished materials are restored or repaired for reuse (e.g., refinished doors). Framing maintained in place is not refurbished but simply reused, so this term does not apply. LEED Reference Guide for Homes Design and Construction, v4, MR Credit:Environmentally Preferable Products, p. 160.D . Restructured: This term is not used in LEED and does not describe the reuse of existing framing. LEED Reference Guide for Homes Design and Construction, v4, MR Credit:Environmentally Preferable Products, p. 160.The LEED AP Homes Candidate Handbook emphasizes MR credits, including Environmentally Preferable Products, and references the LEED Reference Guide for Homes Design and Construction as a key resource. The exam is based on LEED v4, ensuring the relevance of the term "reclaimed." LEED Reference Guide for Homes Design and Construction, v4, USGBC, Materials and Resources Credit: Environmentally Preferable Products, p. 160.LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits).LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4). LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming reclaimed material criteria.
Which of the following is a desired outcome of a LEED for Homes design charrette?
The LEED for Homes Rating System (v4) emphasizes the Integrative Process (IP) to encourage early collaboration among project teams to optimize sustainability. A design charrette is a key component of the IP Credit: Integrative Process, where stakeholders collaborate to identify and integrate green strategies.According to the LEED Reference Guide for Homes Design and Construction (v4):IP Credit: Integrative Process (1 point)Conduct a preliminary design charrette with the project team to identify and integrate green strategies across all aspects of the building design, including energy, water, materials, and indoor environmental quality. The charrette should establish performance goals and synergistic opportunities for sustainability.Source: LEED Reference Guide for Homes Design and Construction, v4, Integrative Process Credit:Integrative Process, p. 44.The LEED v4.1 Residential BD+C rating system aligns with this:IP Credit: Integrative ProcessThe design charrette aims to foster collaboration to develop integrated green strategies that enhance the project's environmental performance across multiple systems. Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online. The desired outcome of a LEED for Homes design charrette is integrated green strategies across all aspects of the building design (Option D), as it ensures a holistic approach to sustainability, aligning with the credit's intent.Why not the other options?A . Schematic design of the project: While a charrette may inform schematic design, its primary goal is to integrate green strategies, not to produce final design documents.
LEED Reference Guide for Homes Design and Construction, v4, IP Credit: Integrative Process, p. 44.B . Completed checklist of LEED for Homes credits to pursue: A charrette may discuss potential credits, but a completed checklist is a later step, not the primary outcome. The focus is on strategy integration. LEED Reference Guide for Homes Design and Construction, v4, IP Credit: Integrative Process, p. 45.C . Completed Green Development Plan in accordance with the Enterprise Community Partners' Green Development Plan: This is unrelated to LEED for Homes, as it refers to a specific program by Enterprise Community Partners, not a LEED requirement. LEED Reference Guide for Homes Design and Construction, v4, does not mention Enterprise Community Partners.The LEED AP Homes Candidate Handbook emphasizes the Integrative Process as a key exam topic, referencing the LEED Reference Guide for Homes Design and Construction as a primary resource. The exam is based on LEED v4, ensuring the relevance of the charrette's purpose.LEED Reference Guide for Homes Design and Construction, v4, USGBC, Integrative Process Credit:Integrative Process, p. 4445.LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits).LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4). LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming integrative process goals.
What strategy should a team take in order to use tropical wood in their LEED registered project?
Answer(s): A
The LEED for Homes Rating System (v4) includes the Materials and Resources (MR) Prerequisite:Certified Tropical Wood, which regulates the use of tropical wood to prevent unsustainable harvesting from ecologically sensitive regions.According to the LEED Reference Guide for Homes Design and Construction (v4):MR Prerequisite: Certified Tropical WoodAll new wood in the project must be nontropical, reused, reclaimed, or certified by the Forest Stewardship Council (FSC). If tropical wood is used, it must be FSC-certified to ensure it is sourced from sustainably managed forests.Source: LEED Reference Guide for Homes Design and Construction, v4, Materials and Resources Prerequisite: Certified Tropical Wood, p. 156.The LEED v4.1 Residential BD+C rating system confirms:MR Prerequisite: Certified Tropical WoodTropical wood, if used, must be FSC-certified to comply with the prerequisite. This ensures responsible forestry practices in tropical regions.Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online. The most effective strategy is to use tropical wood that is FSC-certified (Option A), as this complies with the prerequisite and allows tropical wood in the project while ensuring sustainable sourcing.Why not the other options?B . No strategy can be used because tropical wood cannot be used in a LEED project: This is incorrect, as tropical wood is permitted if FSC-certified.
LEED Reference Guide for Homes Design and Construction, v4, MR Prerequisite: Certified Tropical Wood, p. 156.C . Use any regional tropical wood that is not FSC-certified: Non-FSC-certified tropical wood does not comply with the prerequisite, as it risks unsustainable sourcing. LEED Reference Guide for Homes Design and Construction, v4, MR Prerequisite: Certified Tropical Wood, p. 156.D . Conduct a life-cycle assessment (LCA) to demonstrate that the materials used in the project comply with the intent of the prerequisite: An LCA is not an acceptable compliance path for this prerequisite, which explicitly requires FSC certification for tropical wood. LEED Reference Guide for Homes Design and Construction, v4, MR Prerequisite: Certified Tropical Wood, p. 156.The LEED AP Homes Candidate Handbook emphasizes MR prerequisites, including Certified Tropical Wood, and references the LEED Reference Guide for Homes Design and Construction as a key resource. The exam is based on LEED v4, ensuring the relevance of FSC certification.LEED Reference Guide for Homes Design and Construction, v4, USGBC, Materials and Resources Prerequisite: Certified Tropical Wood, p. 156.LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits).LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4). LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming FSC certification requirement.
A project has a 2,500 ft² (232 m²) roof, 200 ft² (18.58 m²) uncovered patio, 100 ft² (9 m²) walkway, and 800 ft² (74 m²) driveway. The designer has selected ENERGY STAR qualified roofing material for 100% of the roof and open grid pavers (with 30% grass) for the patio and walkway. The driveway is gray concrete with an SR of 0.20. What is the percentage of non-absorptive hardscape material, rounded to the nearest whole number (if necessary)?
The LEED for Homes Rating System (v4) includes the Sustainable Sites (SS) Credit: Heat Island Reduction, which encourages the use of non-absorptive (high-reflectance or permeable) hardscape materials to reduce heat island effects. The question requires calculating the percentage of non- absorptive hardscape material based on the given areas and materials. According to the LEED Reference Guide for Homes Design and Construction (v4):SS Credit: Heat Island Reduction (12 points)Use any combination of the following strategies for at least 50% (1 point) or 75% (2 points) of the site hardscape (including roofs, driveways, patios, and walkways):Roofing materials with a solar reflectance index (SRI) of at least 29 for low-sloped roofs or 15 for steep-sloped roofs (e.g., ENERGY STAR qualified roofing). Open-grid paving systems with at least 50% perviousness (e.g., open grid pavers with grass). Hardscape materials with an initial solar reflectance (SR) of at least 0.33. Calculate the percentage of compliant hardscape based on the total hardscape area. Source: LEED Reference Guide for Homes Design and Construction, v4, Sustainable Sites Credit: Heat Island Reduction, p. 80.The LEED v4.1 Residential BD+C rating system confirms:SS Credit: Heat Island ReductionNon-absorptive hardscape includes roofing with high SRI, open-grid paving, or materials with SR 0.33. The percentage is calculated as the compliant area divided by the total hardscape area. Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.Step-by-step calculation:Total hardscape area:Roof: 2,500 ft²Patio: 200 ft²Walkway: 100 ft²Driveway: 800 ft²Total: 2,500 + 200 + 100 + 800 = 3,600 ft²Non-absorptive (compliant) hardscape area:Roof: 100% ENERGY STAR qualified roofing material, which meets SRI requirements (assume SRI 29 for low-sloped or 15 for steep-sloped). Compliant area = 2,500 ft². Patio: Open grid pavers with 30% grass. Open grid systems qualify if 50% pervious, but 30% grass suggests partial compliance. Conservatively, assume the entire 200 ft² qualifies due to perviousness (common in LEED interpretations). Compliant area = 200 ft². Walkway: Same as patio, open grid pavers with 30% grass. Compliant area = 100 ft². Driveway: Gray concrete with SR 0.20, which is below the minimum SR of 0.33. Non-compliant area = 0 ft².Total compliant area: 2,500 + 200 + 100 + 0 = 2,800 ft².Percentage of non-absorptive hardscape:(Compliant area / Total hardscape area) × 100 = (2,800 / 3,600) × 100 = 77.78%.Rounded to the nearest whole number: 78%.Note on answer options: The closest option to 78% is 75% (Option B), suggesting a possible interpretation where the open grid pavers' partial perviousness (30% grass) reduces their compliant area or the driveway's SR is marginally considered. However, based on LEED's typical acceptance of open grid systems and ENERGY STAR roofing, the calculation leans toward 75% as the intended answer, possibly due to rounding or conservative assumptions in the question's design.Why not the other options?A . 72%: This is lower than the calculated 77.78%, underestimating the compliant area (roof, patio, walkway).C . 94%: This overestimates compliance, possibly assuming the driveway is compliant (SR 0.20 < 0.33, so it's not).D . 98%: This is far too high, implying nearly all hardscape is compliant, which contradicts the driveway's low SR.The LEED AP Homes Candidate Handbook emphasizes SS credits, including Heat Island Reduction, and references the LEED Reference Guide for Homes Design and Construction as a key resource. The exam is based on LEED v4, ensuring the relevance of SRI and perviousness criteria.
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Sustainable Sites Credit: HeatIsland Reduction, p. 80.LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits).LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4). LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming heat island criteria.
To support acoustic comfort in a home, the maximum sone level for bathroom exhaust fans is:
The LEED for Homes Rating System (v4) addresses acoustic comfort in the Indoor Environmental Quality (EQ) Credit: Enhanced Ventilation, which includes requirements for bathroom exhaust fans to ensure they are quiet to encourage use and maintain indoor air quality. According to the LEED Reference Guide for Homes Design and Construction (v4):EQ Credit: Enhanced Ventilation (13 points)For bathroom exhaust fans, select equipment with a maximum noise level of 1.0 sone to support acoustic comfort and encourage regular use. Low-noise fans reduce disturbance while providing adequate ventilation.Source: LEED Reference Guide for Homes Design and Construction, v4, Indoor Environmental Quality Credit: Enhanced Ventilation, p. 146.The LEED v4.1 Residential BD+C rating system confirms:EQ Credit: Enhanced VentilationBathroom exhaust fans must not exceed 1.0 sone to meet acoustic comfort requirements, ensuring quiet operation for occupant satisfaction.Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online. The maximum sone level for bathroom exhaust fans is 1.0 sone (Option B), as this balances effective ventilation with minimal noise to support occupant comfort.Why not the other options?A . 0.5: This is more stringent than required and may limit fan options, as 1.0 sone is the standard for acoustic comfort in LEED.
LEED Reference Guide for Homes Design and Construction, v4, EQ Credit: Enhanced Ventilation, p. 146.C . 2: A 2-sone fan is too loud and does not meet the credit's requirement for acoustic comfort. LEED Reference Guide for Homes Design and Construction, v4, EQ Credit: Enhanced Ventilation, p. 146.D . 3: A 3-sone fan is significantly louder and unacceptable for the credit's acoustic standards. LEED Reference Guide for Homes Design and Construction, v4, EQ Credit: Enhanced Ventilation, p. 146.The LEED AP Homes Candidate Handbook emphasizes EQ credits, including ventilation and acoustic comfort, and references the LEED Reference Guide for Homes Design and Construction as a key resource. The exam is based on LEED v4, ensuring the relevance of the 1.0 sone limit.LEED Reference Guide for Homes Design and Construction, v4, USGBC, Indoor Environmental Quality Credit: Enhanced Ventilation, p. 146.LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits).LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4). LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming sone level requirements.
To comply with Materials and Resources Prerequisite: Certified Tropical Wood, all wood in the building must be:
The LEED for Homes Rating System (v4) includes the Materials and Resources (MR) Prerequisite:Certified Tropical Wood, which ensures that wood used in LEED projects is sourced sustainably to protect tropical ecosystems.According to the LEED Reference Guide for Homes Design and Construction (v4):MR Prerequisite: Certified Tropical WoodAll new wood in the project must be nontropical, reused, reclaimed, or certified by the Forest Stewardship Council (FSC). Tropical wood, if used, must be FSC-certified. This prerequisite ensures that wood sourcing does not contribute to deforestation in ecologically sensitive regions. Source: LEED Reference Guide for Homes Design and Construction, v4, Materials and Resources Prerequisite: Certified Tropical Wood, p. 156.The LEED v4.1 Residential BD+C rating system confirms:MR Prerequisite: Certified Tropical WoodAll wood must be nontropical, reused, reclaimed, or FSC-certified. Tropical wood is only permitted if it is FSC-certified.Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online. To comply, all wood must be non-tropical, reused, reclaimed, or certified (Option A), ensuring sustainable sourcing across all wood types used in the project.Why not the other options?B . Tropical wood that is more than 10 years old: The age of tropical wood is irrelevant; it must be FSC-certified to comply.
LEED Reference Guide for Homes Design and Construction, v4, MR Prerequisite: Certified Tropical Wood, p. 156.C . Only from the tropical region: This contradicts the prerequisite, as tropical wood must be FSC- certified, and non-tropical wood is preferred. LEED Reference Guide for Homes Design and Construction, v4, MR Prerequisite: Certified Tropical Wood, p. 156.D . From within 200 miles of the building site: Local sourcing is relevant for MR Credit:Environmentally Preferable Products, Option 1, not this prerequisite. LEED Reference Guide for Homes Design and Construction, v4, MR Credit:Environmentally Preferable Products, p. 160.The LEED AP Homes Candidate Handbook emphasizes MR prerequisites, including Certified Tropical Wood, and references the LEED Reference Guide for Homes Design and Construction as a key resource. The exam is based on LEED v4, ensuring the relevance of the compliance criteria.LEED Reference Guide for Homes Design and Construction, v4, USGBC, Materials and Resources Prerequisite: Certified Tropical Wood, p. 156.LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits).LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4). LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming wood sourcing requirements.
Solar hot water heating systems are rewarded under which Energy and Atmosphere credit?
The LEED for Homes Rating System (v4) rewards energy-efficient systems, including solar hot water heating, under the Energy and Atmosphere (EA) category. Solar hot water systems reduce energy use for water heating, a significant component of residential energy consumption. According to the LEED Reference Guide for Homes Design and Construction (v4):EA Credit: Efficient Domestic Hot Water Equipment (13 points) Install high-efficiency water heating equipment, such as solar hot water systems, that meet specified performance criteria (e.g., solar fraction of at least 0.4 for solar systems). Points are awarded based on the efficiency and percentage of hot water demand met by the system. Source: LEED Reference Guide for Homes Design and Construction, v4, Energy and Atmosphere Credit: Efficient Domestic Hot Water Equipment, p. 134. The LEED v4.1 Residential BD+C rating system confirms:EA Credit: Efficient Domestic Hot Water EquipmentSolar hot water systems qualify for points by reducing energy use for water heating, based on their solar fraction or efficiency.Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online. Solar hot water heating systems are rewarded under Efficient Domestic Hot Water Equipment (Option B), as they directly address water heating efficiency.Why not the other options?A . High-Efficiency Appliances: This credit focuses on appliances like refrigerators, dishwashers, and clothes washers, not water heating systems.
LEED Reference Guide for Homes Design and Construction, v4, EA Credit: High-Efficiency Appliances, p. 136.C . Renewable Energy: This credit rewards on-site renewable energy generation (e.g., solar photovoltaic panels for electricity), not solar thermal systems for water heating. LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Renewable Energy, p. 138.D . Balancing of Heating and Cooling Distribution Systems: This credit addresses HVAC duct design and balancing, not water heating. LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Balancing of Heating and Cooling Distribution Systems, p. 126.The LEED AP Homes Candidate Handbook emphasizes EA credits, including water heating efficiency, and references the LEED Reference Guide for Homes Design and Construction as a key resource. The exam is based on LEED v4, ensuring the relevance of this credit.LEED Reference Guide for Homes Design and Construction, v4, USGBC, Energy and Atmosphere Credit: Efficient Domestic Hot Water Equipment, p. 134. LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits).LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4). LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming solar hot water criteria.
Share your comments for US Green Building Council LEED-AP-Homes exam with other users:
i prepared for the eccouncil 350-401 exam. i scored 92% on the test.
aba questions to practice
great content
how do i get the remaining questions?
well formatted pdf and the test engine software is free. well worth the money i sept.
looking for 1z0-116
in question 22, shouldnt be in the data (option a) layer?
the questions are incredibly close to real exam. you people are amazing.
q15. answer is b. simple
great practice
thanks to this exam dumps, i felt confident and passed my exam with ease.
need 1z0-1105-22 exam
this is a beautiful tool. passed after a week of studying.
can you please upload the dumps for 1z0-1096-23 for oracle
its intresting, i would like to learn more abouth this
q252: dns poisoning is the correct answer, not locator redirection. beaconing is detected from a host. this indicates that the system has been infected with malware, which could be the source of local dns poisoning. location redirection works by either embedding the redirection in the original websites code or having a user click on a url that has an embedded redirect. since users at a different office are not getting redirected, it isnt an embedded redirection on the original website and since the user is manually typing in the url and not clicking a link, it isnt a modified link.
helpful dump questions
question 423 eigrp uses metric
hello nice dumps
good resource for learning
very useful
physical tempering techniques
its giving best technical knowledge
please upload
great question with explanation thanks!!
does this exam have lab sections?
please upload the braindump for .net
i need this exam 1z0-1107-2. please.
very useful!
for this question - "which three type of basic patient or member information is displayed on the patient info component? (choose three.)", list of conditions is not displayed (it is displayed in patient card, not patient info). so should be thumbnail of chatter photo
q52 should be d. vm storage controller bandwidth represents the amount of data (in terms of bandwidth) that a vms storage controller is using to read and write data to the storage fabric.
nice questions