Amazon
Anthropic
Avaya
Cisco
CompTIA
CrowdStrike
EC-Council
EXIN
Fortinet
Google
ISC
ISC2
ITIL
Juniper
Microsoft
NVIDIA
Palo Alto Networks
Salesforce
SAP
VMware
All Vendors

Test Prep CFA® Level I Chartered Financial Analyst CFA-Level-I Dumps in PDF

Free Test Prep CFA-Level-I Real Questions (page: 147)

CFA-Level-I PDF — 3963 Questions

Which of the following is / are true?

  1. A sample is a subset of the population.
    II. The population mean is used to estimate the sample mean.
    III. The population mean equals the sum of all the available observations divided by the number of observations.
    IV. A sample has a unique mean.
  2. I, II, III & IV
  3. I, III & IV
  4. IV only
  5. I only
  6. I & III
  7. I & IV
  8. II only
  9. III only

Answer(s): F

Explanation:

The sample mean is used to estimate the population mean, not the other way around. The sum of all the available observations divided by the number of observations is the sample mean, not the population mean (unless the observation set equals the entire population, which is almost never the case).



The R-square in a univariate regression measures:

  1. the significance of the regression.
  2. the variance of the error term.
  3. the amount of variance in the dependent variable caused by the variance in the independent variable.
  4. the correlation between the dependent and the independent variables.

Answer(s): C

Explanation:

It should be noted that in a univariate regression, the square root of R-square equals the correlation coefficient.
The significance of a univariate or a multivariate regression is measured by the F-statistic.



John buys a house that costs $175,000 and agrees to pay for it with a 15 year mortgage at 7% per year, compounded monthly. What is John's monthly payment on the loan?

  1. $972.22
  2. $552.12
  3. $12,218.50
  4. $12,250.06
  5. $1,572.95

Answer(s): E

Explanation:

On the BAII Plus, press 180 N, 7 divide 12 = I/Y, 175000 PV, 0 FV, CPT PMT. On the HP12C, press 180 n, 7 ENTER 12 divide i, 175000 PV, 0 FV, PMT. Make sure the BAII Plus has the P/Y value set to 1.



Each salesperson in a large department store chain is rated either below average, average, or above average with respect to sales ability. Each salesperson is also rated with respect to his or her potential for advancement either fair, good, or excellent. These traits are the 500 salespeople were cross classified into the following table.

Sales Ability Potential for Advancement
Fair Good Excellent
Below Average 161222
Average 456045
Above Average 9372135

What is the probability that a salesperson selected at random will have average sales ability and good potential for advancement?

  1. 0.09
  2. None of these answers
  3. 0.12
  4. 0.525
  5. 0.30

Answer(s): C

Explanation:

Prob. of selecting a person with average sales ability: (45 + 60 + 45)/500 = 3/10. Prob. of selecting good potential amongst those with average sales ability: 60/150. Therefore: 3/10*6/15 = 0.12.



You are given a risk-free rate of 3% per year, a portfolio return of 8% per year, and a standard deviation of portfolio return of 22% per year. What is the Sharpe measure of risk-adjusted performance?

  1. 0.250.
  2. 0.234.
  3. 0.227.
  4. 0.222.

Answer(s): C

Explanation:

The Sharpe measure of risk-adjusted performance is equal to (rbar_p - rbar_f)/sigma_p, where rbar_p is the mean portfolio return, rbar_f is the mean risk-free return, and sigma_p is the standard deviation of portfolio return. In our case, we have (8% - 3%) / 22% = 5/22 = 0.227.



PDF
Viewing page 147 of 793

Share your comments for Test Prep CFA-Level-I exam with other users:

A
AI Tutor Explanation
7/21/2026 5:23:40 PM

Question 366:
Question 366 asks how to apply an Application Security Group (ASG1) to VM1. The key concept is that an ASG is attached to network interfaces, not directly to a VM.

  • Correct answer: A. Associate NIC1 to ASG1
  • Why: An ASG is used to group NICs so NSG rules can target the group. To apply ASG1 to VM1, you must attach VM1’s NIC (NIC1) to ASG1. Merely modifying the ASG’s properties or modifying NSG1 does not attach the VM’s NIC to the ASG.
  • Why others are wrong:
- B: “Modify the properties of ASG1” does not attach it to the NIC. - C: “Modify the properties of NSG1” changes NSG settings, but not ASG associations.
Quick note:
  • After associating NIC1 with ASG1, you can reference ASG1 in NSG rules as a source or destination to control traffic for VM1’s NIC. Example commands (CLI) or portal steps involve adding the NIC to the ASG.

Harare, Zimbabwe
A
AI Tutor Explanation
7/20/2026 9:43:58 AM

Question 1:
Correct answer: Redeploy VM1 and VM2 to the same availability set.
Why:

  • A Basic Load Balancer’s backend pool must consist of VMs that are in the same Availability Set. If VM1 and VM2 are in different AVSets (or one isn’t in an AVSet), you can’t add both to LB1’s backend pool. Redeploying/moving both VMs into the same Availability Set resolves this.
  • If you needed cross-AVSet load balancing, you would use a Standard Load Balancer instead.

What to do next (high level):
  • Create or choose a single Availability Set.
  • Move VM1 and VM2 into that AVSet.
  • Add both VMs to LB1’s backend pool.

Harare, Zimbabwe
A
AI Tutor Explanation
7/18/2026 4:50:31 PM

Question 1:
Here’s a targeted explanation of Question 1.

  • The scenario: You’re deploying several new VMs on on-prem Hyper-V (Windows Server 2012 R2). You’ve got PowerShell scripts to configure VMs after deployment and want them to run automatically on each new VM.

  • Options brief:
- SetupComplete.cmd in %windir%\setup\scripts - A GPO to run as logon scripts - A GPO to run as startup scripts - Put the scripts on a new VHD
  • Why A is the best choice here:
- SetupComplete.cmd runs during Windows Setup (after the OS is installed and before the first logon). If you base new VMs on a generalized image, the script will execute automatically on first boot, ensuring the VM is configured right away without requiring domain login or user interaction. - GPO startup/logon scripts require the machine to be domain-joined and the GPO to be processed at boot or user logon, which adds timing and dependency considerations and may not run reliably during first boot from a generalized image. - Putting scripts on a VHD won’t automatically execute anything unless you explicitly configure a startup process, which is less reliable than using SetupComplete.cmd for first-boot customization.
  • Implementation tip:
- Place a file named SetupComplete.cmd in %WINDIR%\Setup\Scripts\ with your PowerShell commands (calling powershell.exe -NoProfile -ExecutionPolicy Bypass -File YourScript.ps1, for example). This file runs once when Windows Setup completes on each new VM created from your image.
Note: The explanation in the provided ans

Harare, Zimbabwe
A
AI Tutor Explanation
7/1/2026 9:25:07 AM

Question 1:
The correct answer is C.
Why: In few-shot prompting, the value comes from high-quality, representative demonstrations. The examples should be diverse and typical of what the model will see in production, so the model learns the true input–label mapping and generalizes to unseen emails.
Why the other options are less appropriate:

  • A: Using random, unrelated examples does not reflect the actual task distribution and won’t help the model generalize to real inputs.
  • B: “Always use more than 10 examples” isn’t a universal rule; quantity without quality and relevance can add noise.
  • D: Intentionally incorrect labels would mislead the model and degrade performance; you want correct, coherent mappings.

Practical tip: ensure the examples cover common cases and edge cases, use the same input–output format, and keep labels consistent with the task (e.g., Spam vs. Work).

Chennai, India
A
Anu
6/30/2026 1:05:52 PM

AWESOME and Thanku

Hyderabad, India
A
AI Tutor Explanation
6/27/2026 6:40:26 AM

Question 24:
Question 24 asks which three actions are needed to set up intercompany accounting between two legal entities.
The three correct actions are:

  • A) Select intercompany journal names.
  • C) Create intercompany main accounts to use for the due to and due from accounting entries.
  • D) Define intercompany accounting setup by creating legal entity pairs defining originating and destination companies.

Why these are correct:
  • D defines the actual pairing and direction (which entity is originating and which is destination). Without defined pairs, there is no enabled intercompany relationship.
  • C establishes the main GL accounts used for the due-to and due-from postings between the entities, enabling correct cross-entity accounting and audit trails.
  • A standardizes and identifies intercompany postings via dedicated journal names, aiding tracking and reporting.

Why the other options aren’t part of the three actions:
  • B (Configure intercompany accounting in both the originating and destination entities) is not listed as one of the three actions in this question’s solution.
  • E (Configure intercompany accounting in the destination entity only) would be insufficient on its own.

Banjar Taman, Indonesia
A
AI Tutor Explanation
6/27/2026 1:32:13 AM

Question 1:
The correct answer is Enabling team.

  • In SAFe, enabling teams are designed to assist other teams by providing specialized capabilities, coaching, and help with adopting new technologies or practices. They focus on enabling proficiency across teams rather than delivering features themselves.
  • Platform teams provide shared services across teams (not primarily about coaching on new tech).
  • Stream-aligned teams are value-stream–oriented and deliver features to customers.
  • Complicated subsystem teams handle a part of the system that requires deep expertise, but not primarily to uplift other teams’ capabilities.

Anonymous
A
AI Tutor Explanation
6/22/2026 8:23:02 AM

Question 1:

  • Answer: A

  • Why: For a Snowball Edge data-transfer job, the device rental covers the use of the appliance for the initial 10-day period at no extra charge. After those 10 days, AWS charges a daily rental fee for continued use. Data transfer activities (in or out of the appliance) and ongoing use beyond the initial window typically incur separate charges, so options B, C, and D would involve costs. In short, the only option that’s free is using the appliance for the first 10 days.

Bengaluru, India
A
AI Tutor Explanation
6/22/2026 5:20:17 AM

Question 1:
The best solution is A: Configure a SetupComplete.cmd batch file in the %windir%\setup\scripts directory.
Why this is correct:

  • SetupComplete.cmd runs automatically during Windows setup after OS deployment from a generalized image. When you create new VMs from that image, the script executes on first boot, applying your post-deployment configuration without requiring user interaction.
  • This approach is appropriate for on-prem Hyper-V environments where you’re building and deploying VMs from a prepared image.

Why the other options are less suitable:
  • B (logon scripts): Run only after a user logs on; not guaranteed for first boot or for machines without interactive logon.
  • C (startup scripts via GPO): Can run at startup, but requires domain policy application and may run multiple times or fail if the machine isn’t in a ready state.
  • D (place scripts in a new VHD): Not a scalable or automated method; requires manual steps and doesn’t ensure consistent execution on every new VM.

Note: The provided explanation in the bank references a Azure VM Custom Script Extension, which is not applicable to on-prem Hyper-V. That extension is for Azure VMs, not for local Hyper-V deployments.

Lagos, Nigeria
A
AI Tutor Explanation
6/22/2026 4:11:47 AM

Question 9:
Question 9 asks about how GitHub Copilot identifies public code matches when the public code filter is on.

  • Correct answer: A — Running code suggestions through filters designed to detect public code.

  • Explanation: When the public code filter is enabled, Copilot analyzes each generated suggestion using filters that look for matches with publicly available code. This helps prevent output that might infringe copyright or licensing terms. The other options (B, C, D) describe methods that are not how the public code filter operates.

Thiruvananthapuram, India
A
AI Tutor Explanation
6/15/2026 6:26:53 PM

Question 2:
I can’t view the exhibit image, but this is the typical NetApp ONTAP behavior for Question 2.

  • The correct answer is D: Add HOST 3's IP address to the NFS export policy.
  • Why: NFS access is controlled by export-policy rules. If the new ESXi host’s IP isn’t listed in the NFS export policy, the host cannot mount the NFS datastore, even if the volume and LUN are configured correctly.
  • Why the other options don’t solve it:
- A (Add NFSv4 to access protocols): Simply enabling NFSv4 doesn’t grant access if the host isn’t allowed by the export policy. - B (Enable Kerberos in the export policy): Kerberos is related to NFSv4 security, not to basic host access if the host’s IP is blocked. - C (Add SMB/CIFS to the access protocols): SMB/CIFS is unrelated to NFS mounts.
So, ensure the new host’s IP (HOST 3) is allowed by the NFS export policy to fix the mounting issue.

Gurugram, India
A
AI Tutor Explanation
6/13/2026 3:10:11 AM

Question 23:
Question 23 describes a multimodal model where users can upload unsafe images that could contain hidden instructions. The goal is to implement controls to mitigate this risk.
Key points to understand

  • Prompt shield for documents: Highly effective. It scans text extracted from inputs (including image text) before it’s sent to the LLM to catch hidden instructions or jailbreaking tries embedded in documents or image-derived text.
  • Prompt shield for user prompts: Partially effective. It blocks direct jailbreak attempts written in the user’s prompt, but doesn’t catch everything, especially content coming from image text.
  • Image moderation: Highly effective. Blocks unsafe or harmful images before they reach the model, preventing many attacks at the source.
  • Protected Material Detection: Not helpful here. It’s designed to detect copyrighted material in outputs, not to protect against inputs that try to manipulate the model.

Why this matters
  • The strongest defense is defense in depth: combine image moderation with both types of prompt shields. The document/text shield catches hidden instructions in extracted image text; the user-prompt shield mitigates jailbreak attempts in user-provided prompts; image moderation stops unsafe images before processing.

On the provided solution note
  • The stated answer (A: “configure a prompt shield for user prompts”) would help, but it alone does not fully meet the goal. A more robust approach is to apply all three controls (document prompt shield, user prompt shield, and image moderation) to achieve stronger risk mitigation.

Bengaluru, India
M
mo
6/11/2026 9:00:16 AM

beautiful exams

Pretoria, South Africa
A
AI Tutor Explanation
6/2/2026 6:10:04 AM

You need to implement the date dimension in the data store. The solution must meet the technical requirements. What are two ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point. Populate the date dimension table by using a dataflow. Populate the date dimension table by using a Copy activity in a pipeline. Populate the date dimension view by using T-SQL. Populate the date dimension table by using a Stored procedure activity in a pipeline.Please answer

  • The two correct options: A and D.

  • Why:
- A. Populate the date dimension table by using a dataflow. A dataflow can generate and load the date dimension data into OneLake (Delta format) as part of the AnalyticsPOC data store, meeting the requirement to load data in one area before modeling, and it supports scheduling for ongoing updates. - D. Populate the date dimension table by using a Stored procedure activity in a pipeline. A pipeline with a Stored Procedure activity can run a T-SQL routine that materializes the date dimension table (2010 through the end of the current year), aligning with the need for deterministic population and orchestration.
  • Note: B (Copy in a pipeline) would require a source, and C (date dimension view via T-SQL) is feasible but not selected here; the two stated options are the ones identified as correct for this question.

Cairo, Egypt
A
AI Tutor Explanation
6/1/2026 6:15:05 AM

Question 14:

  • Correct selections: B and E

Why:
  • B. Admin access to the deployment pipeline: This gives the developers the ability to manage and run deployments within the pipeline, enabling them to deploy content to the Development and Test stages.
  • E. Contributor access to the Development and Test workspaces: This level allows them to deploy items into the Development and Test workspaces as required, while preventing deployments to Production.

Notes:
  • If you also need the developers to view Production, grant them Viewer access to the Production workspace (not part of the two required options, but needed to satisfy the “view Production” requirement).

Cairo, Egypt
A
AI Tutor Explanation
6/1/2026 5:32:19 AM

Question 5:
Question 5 asks how to identify min and max values for each column in a Dataflow result.
Correct options: B and E.

  • B. Enable column profile: This turns on column profiling, which computes descriptive statistics for each column, including min and max values.
  • E. Enable details pane: With the details pane enabled, you can view the per-column profile data (including min and max) when you select a column.

Notes:
  • A (Show column value distribution) is not required for min/max; it's for distribution histograms.
  • C (Show column profile in details pane) is optional. If the details pane is already enabled (E) and column profiling is on (B), you can view the profile without explicitly enabling C.

Cairo, Egypt
A
AI Tutor Explanation
6/1/2026 2:03:00 AM

Question 18:
Question 18: Why not A?

  • The two recommended strategies are B and D (per the answer key):
- B: Migrate users in phases based on their functions, with parallel use of legacy and Salesforce. - D: Use a full sandbox environment and run data migration tests with real legacy data.
  • Why not A: A focuses on identifying the data to migrate and planning scripts for verifying data integrity. While important, it’s primarily a preparation/validation activity, not an active risk-mitigation step during the migration itself. The question asks for strategies that directly mitigate migration risks in practice, such as staged rollout (B) and thorough testing in a sandbox with real data (D). A does not address go-live risk, user adoption, or testing of the migration process in a controlled environment.

Melbourne, Australia
A
AI Tutor Explanation
5/16/2026 7:04:20 AM

Question 4:
Question 4 is about when to use batch processing.

  • Answer key: A (the option related to “When to use batch processing”).
  • Core idea: Batch processing is used when you can tolerate some delay and don’t need results instantly. Data is collected over a period, then processed together in a batch.

Why this is correct:
  • Latencies are expected with batch jobs. The system processes data in groups rather than as soon as data arrives.
  • The processes are often not mission-critical at the exact moment they run, so delays don’t impact operations.

Key concepts to know:
  • Batch processing vs real-time processing: Batch processes collect data and run at scheduled times or when resources are available, whereas real-time processing handles data immediately.
  • When to use batch processing:
- High-volume data where immediate results aren’t required - Tasks that can be scheduled (e.g., nightly ETL, end-of-day payroll, bulk reports) - When cost or resource utilization is optimized by processing in groups
Examples: nightly data aggregation, batch payroll processing, end-of-day reconciliations.
If you want, I can walk through how to identify the right scenario for batch vs real-time in practice.

Cape Town, South Africa
A
AI Tutor Explanation
5/15/2026 9:49:16 AM

Question 5:
I can’t see the [Image] in Question 5, but I can explain the likely reasoning.

  • Correct components: SAS adapter and disk (options B and D).
  • Why: This question is about diagnosing a storage-path issue inside the node. The SAS adapter connects disks to the controller, and the disks themselves are where I/O problems or failures usually originate. The cluster switches and network interface cards are more related to the network path rather than the direct storage path, unless the symptom points to a network fault.

How to examine these two components:
  • SAS adapter
- Check link status and port mapping. - Verify firmware version and compatibility. - Inspect cabling to disk shelves and any expanders. - Look for adapter errors in system logs.
  • Disk
- Check health status for each disk (fail/degraded, SMART data). - Inspect LEDs on the disk and shelf. - Review reallocation, pending operations, and overall disk state with storage commands/logs. - Confirm hot spares and disk replacement readiness.
If you want, I can walk through the exact commands you’d use in ONTAP or a CLI.

Mumbai, India
A
AI Tutor Explanation
5/14/2026 11:59:47 AM

Question 12:
Here’s why Question 12’s correct choices are C and D.

  • C (Azure DevOps, build and upload to asset library)
- What it means: Create a deployable package from a branch in Azure DevOps, then use an LCS asset upload step to push that package into the Dynamics 365 F&O asset library. - Why it’s valid: This is a standard path to prepare and publish a deployable package to LCS for deployment.
  • D (Visual Studio, create deployment package and upload)
- What it means: Use Visual Studio to generate a Dynamics 365 deployment package, then upload that package to the LCS asset library. - Why it’s valid: Visual Studio can produce the deployable package, which is what LCS expects in the asset library.
Why A and B are not correct:
  • A: Visual Studio export the project and upload to asset library
- You don’t export a project to the asset library; you export a deployable package and upload that.
  • B: Azure DevOps, queue a build and upload the model to the asset library
- The asset library stores deployable packages, not models. You upload a package, not a model.

Innisfil, Canada
A
AI Tutor Explanation
5/14/2026 11:49:11 AM

Question 3:
Question 3 asks for two valid ways to meet the purchase order creation validation (warn if the vendor is on the exclusion list for the customer/product and block/alert accordingly).
Correct answers: C and D

  • C: In Application Explorer, create a form extension and implement validation.
- Extend the Purchase Order creation form and add validation logic (e.g., before save/submit) to check VendExclusions for the customer/item and show a warning or block the PO as needed.
  • D: Implement Chain of Command (CoC) and method wrapping by creating a form extension class.
- Use CoC to wrap the target PO creation method, perform the exclusion check after calling super(), and enforce the rule (warning or prevent creation).
Why not A or B?
  • A (class with a form data source event handler) is not the standard pattern for this UI-level validation scenario and is less direct for enforcing creation-time behavior.
  • B (table extension with validation) cannot sufficiently enforce the UI-level workflow or trigger user-facing warnings during PO creation.

So, the two valid techniques are C and D, reflecting the recommended form-extension patterns: direct form validation and CoC-based method wrapping.

Innisfil, Canada
A
AI Tutor Explanation
5/14/2026 11:42:28 AM

Question 12:
Here’s how to understand question 12.

  • What the question asks: Two valid ways to prepare and deploy a software deployable package to a test environment (via the asset library in LCS).

  • The correct options: C and D.

- C: In Azure DevOps, queue a build from the corresponding branch to produce a deployable package, then upload that package to the LCS asset library. This uses a release/build workflow and requires an LCS connection set up in Azure DevOps.
- D: In Visual Studio, create a Dynamics 365 deployment package using the dev tools, then upload that deployable package to the LCS asset library. This is the Visual Studio–based path to generate and publish a deployable package.
  • Why A and B are not correct:

- A: Exporting the project from Visual Studio and uploading the project itself to the asset library isn’t the correct artifact; the asset library expects a deployable package, not a raw project export.
- B: Queuing a build and “uploading the model” to the asset library isn’t the standard deployable package workflow; the target artifact should be a deployable package, not a model file.
Key concept: Deployable packages are published to the LCS Asset Library, and you can create them either from Visual Studio or from Azure DevOps as part of a build/release pipeline.

Innisfil, Canada
A
AI Tutor Explanation
5/13/2026 11:23:34 PM

Question 6:
Here’s how question 6 works.
Key constraint: All new and extended objects must be in an existing model named FinanceExt. Creating a brand-new model is not allowed.
Why the two correct options work:

  • B. Overlay the existing FinanceExt model and populate the solution definition.
- This keeps all changes inside FinanceExt by overlaying the base model with your solution details.
  • C. Extend the existing FinanceExt model and populate the project model definition.
- This uses the extension approach to add your changes while still residing in FinanceExt, organized via the project model definition.
Why the other options are not correct:
  • A. Create a new model that extends the existing FinanceExt model.
- Not allowed, since no new models may be created.
  • D. Modify DefaultModelForNewProject and name the model FinanceExt.
- The goal is to place changes in FinanceExt, not to name or create a new model via config; this doesn’t describe a valid way to satisfy the constraint.
In short: use B or C; both keep changes inside the existing FinanceExt model.

Innisfil, Canada
A
AI Tutor Explanation
5/13/2026 11:00:29 PM

Question 2:
I don’t have the text for Question 2 here. Please paste the exact Question 2 (including all answer choices) or describe the topic it covers.
Once I have it, I’ll:

  • Identify the exam objective it targets.
  • Break down the stem and each option.
  • Use elimination and key concepts to justify why options are correct or incorrect.
  • Give the final answer with a concise explanation of the reasoning.

If there’s an image in Question 2, describe it or transcribe any text shown.

Innisfil, Canada
A
AI Tutor Explanation
5/10/2026 12:51:57 AM

Which statement is true about using default environment variables? The environment variables can be read in workflows using the ENV: variable_name syntax. The environment variables created should be prefixed with GITHUB_ to ensure they can be accessed in workflows The environment variables can be set in the defaults: sections of the workflow The GITHUB_WORKSPACE environment variable should be used to access files from within the runner.
Correct answer: The statement "The GITHUB_WORKSPACE environment variable should be used to access files from within the runner." is true.
Why the others are false:

  • ENV: variable_name syntax is not how you read env vars in workflows. Use ${{ env.VARIABLE }} in expressions or $VARIABLE in a shell.
  • Environment variables don’t need a GITHUB_ prefix. Custom vars can have any name; GITHUB_ is only for built-in, predefined vars.
  • defaults: cannot set environment variables. It configures defaults for run steps (like shell or working-directory), not env vars.

Extra tip:
  • GITHUB_WORKSPACE (or ${{ github.workspace }}) is the root path on the runner where the repository is checked out. Use it to access files, e.g., $GITHUB_WORKSPACE/... or ${{ github.workspace }}/....

New Delhi, India
A
AI Tutor Explanation
5/7/2026 11:34:48 PM

As an administrator for this subscription, you have been tasked with recommending a solution that prohibits users from copying corporate information from managed applications installed on unmanaged devices. Which of the following should you recommend? Windows Virtual Desktop. Microsoft Intune. Windows AutoPilot. Azure AD Application Proxy.

  • Microsoft Intune

Reason: Intune can enforce app protection policies (MAM) on managed apps, even on unmanaged devices, to prevent data leakage (e.g., restricting copy/paste, saving to non-approved apps, etc.). The other options don’t address data protection within apps on unmanaged devices.

Oslo, Norway
A
AI Tutor Explanation
5/4/2026 2:43:10 AM

Question 34:

  • Question 34 asks: Which role(s) has the capability to create Policies? Choose two.
  • Likely correct roles: Compliance Manager and Compliance admin (A and B). These roles typically have policy governance rights to create and manage policies.
  • Why not the others: Compliance User is usually a limited user, not allowed to create policies. Risk Manager focuses on risks, not policy creation in standard setups.
  • Note on the provided key: The answer shown is “C” (Compliance User), which conflicts with “Choose two.” This is probably a key error. In practice, verify against your instance’s ACLs or official docs.
  • Quick check tip: In ServiceNow, review the ACLs and role permissions for the Policy records to see which roles can create policies.

New Delhi, India
A
AI Tutor Explanation
4/29/2026 11:59:58 PM

function of appnav in sdwan

  • AppNav (Application Navigation) is the Cisco SD-WAN feature that provides application-level visibility and control.
  • It maintains a catalog of applications (AppIDs) with attributes (ports/protocols, categories) and classifies traffic accordingly.
  • It allows policy authors to reference apps by name in policies, enabling application-aware routing, QoS, and service chaining based on the app’s requirements.
  • The SD-WAN fabric uses AppNav data to steer traffic along the best path, improving user experience for critical apps while optimizing WAN usage.

Sydney, Australia
A
AI Tutor Explanation
4/29/2026 5:25:25 AM

Question 1:

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct

Durban, South Africa
A
AI Tutor Explanation
4/29/2026 5:23:14 AM

Question 5:

  • Correct answer: A. User4 and User1 only

  • Why this is correct:
- The Automatic Enrollment setting in Intune has MDM user scope: GroupA. Only users in GroupA can enroll devices via MDM auto-enrollment. - Device6 will be enrolled via Windows Autopilot and Intune, so enrollment is allowed only for users in GroupA. - Based on the group memberships in the scenario, User4 and User1 are in GroupA, while User2 and User3 are not. Therefore only User4 and User1 can enroll Device6.
  • Quick tip for the exam:
- Remember: MDM user scope determines who can auto-enroll devices; MAM scope controls app protection enrollment. When a new Autopilot device is enrolled, the signing-in user must be in the MDM scope.

Durban, South Africa
A
AI Tutor Explanation
4/29/2026 5:17:10 AM

Why this is correct

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct:
- Windows Autopilot requires devices to be registered by their hardware IDs (hash) before Autopilot can deploy Windows 10 Enterprise. - Collect the hardware IDs from the new Phoenix machines, save them in a CSV, and upload that CSV in the Intune/Windows Autopilot area. This maps each device to an Autopilot deployment profile. - After registration, you can assign Autopilot profiles (Windows 10 Enterprise, etc.). Other options (serial number CSV, generalizing, or Mobility settings) are not the initial Autopilot registration steps.

Durban, South Africa
A
AI Tutor Explanation
4/25/2026 1:53:46 PM

Question 7:

  • Correct answer: B — A risk score is computed based on the number of remediations needed compared to the industry peer average.

Explanation:
  • Risk360 uses a remediation-based score. It benchmarks how many actions are required to fix issues against peers, giving a relative risk posture.
  • Why not the others:
- A: Not just total risk events by location. - C: Time to mitigate isn’t the primary scoring method. - D: Not a four-stage breach scoring approach.
Note: The page text shows a mismatch (it lists D as the answer), but the study guide describes the remediation-based scoring (B) as the correct concept.

New Delhi, India
A
AI Tutor Explanation
4/25/2026 1:42:20 PM

Question 104:

  • Correct answer: D) Multi-Terabyte (TB) Range

  • Brief explanation:
- clustering keys organize data into micro-partitions to improve pruning when queries filter on those columns. - The performance benefit is most significant for very large tables; for small tables the overhead of maintaining clustering outweighs gains. - Therefore, as a best practice, define clustering keys on tables at the TB scale.

Thane, India
C
Community Helper
4/25/2026 2:03:10 AM

Q23: Fabric Admin is correct. Because Domain admin cannot create domains. Only Fabric Admin can among the given options. Q51: Wrapping @pipeline.parameter.param1 inside {} will return a string. But question requires the expression to return Int, so correct answer should be @pipeline.parameter.param1 (no {})

New Delhi, India
AI Tutor 👋 I’m here to help!