A potential problem related to the physical installation of the Iris Scanner in regards to the usage of the iris pattern within a biometric system is:
Answer(s): D
Because the optical unit utilizes a camera and infrared light to create the images, sun light can impact the aperture so it must not be positioned in direct light of any type. Because the subject does not need to have direct contact with the optical reader, direct light can impact the reader.An Iris recognition is a form of biometrics that is based on the uniqueness of a subject's iris. A camera like device records the patterns of the iris creating what is known as Iriscode. It is the unique patterns of the iris that allow it to be one of the most accurate forms of biometric identification of an individual. Unlike other types of biometics, the iris rarely changes over time. Fingerprints can change over time due to scaring and manual labor, voice patterns can change due to a variety of causes, hand geometry can also change as well. But barring surgery or an accident it is not usual for an iris to change. The subject has a high-resoulution image taken of their iris and this is then converted to Iriscode. The current standard for the Iriscode was developed by John Daugman. When the subject attempts to be authenticated an infrared light is used to capture the iris image and this image is then compared to the Iriscode. If there is a match the subject's identity is confirmed. The subject does not need to have direct contact with the optical reader so it is a less invasive means of authentication then retinal scanning would be.
AIO, 3rd edition, Access Control, p 134.AIO, 4th edition, Access Control, p 182.Wikipedia - http://en.wikipedia.org/wiki/Iris_recognitionThe following answers are incorrect:concern that the laser beam may cause eye damage. The optical readers do not use laser so, concern that the laser beam may cause eye damage is not an issue. the iris pattern changes as a person grows older. The question asked about the physical installation of the scanner, so this was not the best answer. If the question would have been about long term problems then it could have been the best choice. Recent research has shown that Irises actually do change over time: http://www.nature.com/news/ageing-eyes-hinder-biometric-scans-1.10722there is a relatively high rate of false accepts. Since the advent of the Iriscode there is a very low rate of false accepts, in fact the algorithm used has never had a false match. This all depends on the quality of the equipment used but because of the uniqueness of the iris even when comparing identical twins, iris patterns are unique.
In Mandatory Access Control, sensitivity labels attached to object contain what information?
Answer(s): B
A Sensitivity label must contain at least one classification and one category set. Category set and Compartment set are synonyms, they mean the same thing. The sensitivity label must contain at least one Classification and at least one Category. It is common in some environments for a single item to belong to multiple categories. The list of all the categories to which an item belongs is called a compartment set or category set.The following answers are incorrect:the item's classification. Is incorrect because you need a category set as well. the item's category. Is incorrect because category set and classification would be both be required.The item's need to know. Is incorrect because there is no such thing. The need to know is indicated by the catergories the object belongs to. This is NOT the best answer.
OIG CBK, Access Control (pages 186 - 188)AIO, 3rd Edition, Access Control (pages 162 - 163)AIO, 4th Edittion, Access Control, pp 212-214.Wikipedia - http://en.wikipedia.org/wiki/Mandatory_Access_Control
What are the components of an object's sensitivity label?
Both are the components of a sensitivity label.The following are incorrect:A Classification Set and a single Compartment. Is incorrect because the nomenclature "Classification Set" is incorrect, there only one classifcation and it is not a "single compartment" but a Compartment Set.A single classification and a single compartment. Is incorrect because while there only is one classifcation, it is not a "single compartment" but a Compartment Set.A Classification Set and user credentials. Is incorrect because the nomenclature "Classification Set" is incorrect, there only one classifcation and it is not "user credential" but a Compartment Set.The user would have their own sensitivity label.
What does it mean to say that sensitivity labels are "incomparable"?
If a category does not exist then you cannot compare it. Incomparable is when you have two disjointed sensitivity labels, that is a category in one of the labels is not in the other label. "Because neither label contains all the categories of the other, the labels can't be compared.They're said to be incomparable"COMPARABILITY:The label:TOP SECRET [VENUS ALPHA]is "higher" than either of the labels:SECRET [VENUS ALPHA] TOP SECRET [VENUS]But you can't really say that the label:TOP SECRET [VENUS]is higher than the label:SECRET [ALPHA]Because neither label contains all the categories of the other, the labels can't be compared. They're said to be incomparable. In a mandatory access control system, you won't be allowed access to a file whose label is incomparable to your clearance.The Multilevel Security policy uses an ordering relationship between labels known as the dominance relationship. Intuitively, we think of a label that dominates another as being "higher" than the other. Similarly, we think of a label that is dominated by another as being "lower" than the other. The dominance relationship is used to determine permitted operations and information flows.DOMINANCEThe dominance relationship is determined by the ordering of the Sensitivity/Clearance component of the label and the intersection of the set of Compartments.Sample Sensitivity/Clearance ordering are:Top Secret > Secret > Confidential > Unclassifieds3 > s2 > s1 > s0Formally, for label one to dominate label 2 both of the following must be true:The sensitivity/clearance of label one must be greater than or equal to the sensitivity/clearance of label two.The intersection of the compartments of label one and label two must equal the compartments of label two.Additionally:Two labels are said to be equal if their sensitivity/clearance and set of compartments are exactly equal. Note that dominance includes equality.One label is said to strictly dominate the other if it dominates the other but is not equal to the other. Two labels are said to be incomparable if each label has at least one compartment that is not included in the other's set of compartments.The dominance relationship will produce a partial ordering over all possible MLS labels, resulting in what is known as the MLS Security Lattice.The following answers are incorrect:The number of classification in the two labels is different. Is incorrect because the categories are what is being compared, not the classifications.Neither label contains all the classifications of the other. Is incorrect because the categories are what is being compared, not the classifications.the number of categories in the two labels is different. Is incorrect because it is possibe a category exists more than once in one sensitivity label and does exist in the other so they would be comparable.
OReilly - Computer Systems and Access Control (Chapter 3) http://www.oreilly.com/catalog/csb/chapter/ch03.htmlandhttp://rubix.com/cms/mls_dom
Which of the following is true about Kerberos?
Answer(s): C
Kerberos depends on secret keys (symmetric ciphers). Kerberos is a third party authentication protocol. It was designed and developed in the mid 1980's by MIT. It is considered open source but is copyrighted and owned by MIT. It relies on the user's secret keys. The password is used to encrypt and decrypt the keys.The following answers are incorrect:It utilizes public key cryptography. Is incorrect because Kerberos depends on secret keys (symmetric ciphers).It encrypts data after a ticket is granted, but passwords are exchanged in plain text. Is incorrect because the passwords are not exchanged but used for encryption and decryption of the keys.It is a second party authentication system. Is incorrect because Kerberos is a third party authentication system, you authenticate to the third party (Kerberos) and not the system you are accessing.
MIT http://web.mit.edu/kerberos/Wikipedi http://en.wikipedia.org/wiki/Kerberos_%28protocol%29OIG CBK Access Control (pages 181 - 184)AIOv3 Access Control (pages 151 - 155)
Share your comments for ISC SSCP exam with other users:
kindly share the dump
could you please upload cfe fraud prevention and deterrence questions? it will be very much helpful.
this is really very very helpful for mcd level 1
very helpful!
question #18s answer should be a, not d. this should be corrected. it should be minvalidityperiod
thanks for the exact solution
need to refer the questions and have to give the exam
i need it right now if it was possible please
i need it very much please share it in the fastest time.
correct answer is d for student.java program
q:37 c is correct
q6 exam topic: terramearth, c: correct answer: copy 1petabyte to encrypted usb device ???
explained answers
plan to take theaws certified developer - associate dva-c02 in the next few weeks
very helpfull
good questions
help to practice csa exam
nice tip and well documented
i need the exam
please upload
prepping for fsc exam
pd1 with great experience
@t it seems like azure service bus message quesues could be the best solution
helpful to check your understanding.
question 128 the answer should be static not auto
more comments here
great support to appear for exams
useful dumps
making progress
q31 answer should be d i think
is this real?
q10: c and f are also true. q11: this is outdated. you no longer need ownership on a pipe to operate it
good questions with simple explanation
admin guide (windows) respond to malicious causality chains. when the cortex xdr agent identifies a remote network connection that attempts to perform malicious activity—such as encrypting endpoint files—the agent can automatically block the ip address to close all existing communication and block new connections from this ip address to the endpoint. when cortex xdrblocks an ip address per endpoint, that address remains blocked throughout all agent profiles and policies, including any host-firewall policy rules. you can view the list of all blocked ip addresses per endpoint from the action center, as well as unblock them to re-enable communication as appropriate. this module is supported with cortex xdr agent 7.3.0 and later. select the action mode to take when the cortex xdr agent detects remote malicious causality chains: enabled (default)—terminate connection and block ip address of the remote connection. disabled—do not block remote ip addresses. to allow specific and known s