Refer to the exhibit.Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer(s): B
Based on the OT Security 7.6 Architect study guide regarding the Asset Identity Center and Asset Management:Vulnerability Visibility: The Asset Identity List tab displays key metadata for IT and OT devices, including detected addresses, users, and a specific column for Vulnerabilities.Virtual Patching Feature: In the OT Security 7.6 architecture, the "Vulnerabilities" column is populated through the OT Security Service license, which includes "OT vulnerability correlation definitions & virtual patching signatures".Correlation Mechanism: FortiGate extracts metadata from OT traffic and uses these signatures to identify known vulnerabilities on the assets. For these vulnerabilities to be identified and correlated in the Asset Identity Center as shown in the exhibit (displaying a count of 8 vulnerabilities), the Virtual Patching feature must be active.Architectural Implementation: Virtual patching is a critical component of the "Protection" layer in OT networks, allowing administrators to secure legacy or unpatchable PLCs and RTUs by blocking exploit attempts at the network level using IPS-based virtual patching signatures.Exhibit Analysis: The presence of identified vulnerabilities (the number "8" in the red shield) in the Asset Identity List confirms that the FortiGate is actively performing vulnerability correlation, which is the operational result of having a Virtual Patching security profile applied to the relevant firewall policy.
According to the IEC 62443 standard, your security level is 4. What is your OT environment defending against? (Choose one answer)
Answer(s): C
According to the OT Security 7.6 Architect study guide regarding IEC 62443 Security Levels:Security Level 4 (SL 4) Definition: This level provides "Protection against intentional violation using sophisticated means with extended resources, specific skills, and high motivation".Real-World Application: The study guide specifically notes: "If you are facing a syndicate of cyber extortionists with extensive resources and capabilities, then you should strive for security level 4".Comparison to other levels:SL 1: Protection against "casual or unintentional system violation".SL 2: Protection against "intentional violation using simple means with low resources".SL 3: Protection against "intentional violation using sophisticated means with moderate resources".
Refer to the exhibit.A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer. When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)
Answer(s): B,C
Based on the architecture of FortiAnalyzer within the Security Fabric and its automation capabilities:Automation Stitch and Reports: Within the Security Fabric environment, FortiAnalyzer serves as a key element in creating automation stitches and playbooks. For a report to be selectable within a Playbook task (such as the Run_report task shown in the exhibit), it must meet specific technical prerequisites in the report configuration.Auto-cache Requirement (Answer C): For a report to be used for automated generation, it must be "ready" to be processed by the engine without manual intervention. Auto-cache must be enabled in the report settings to ensure the report can be generated dynamically and efficiently when triggered by the playbook.Extended Log Filtering (Answer B): Playbooks often pass specific variables from the trigger (such as a specific device IP or a time range) into the report. For the report to accept these dynamic parameters and be visible as an "automation-compatible" report in the Playbook interface, Extended Log Filtering must be enabled.Workflow Constraints: Without these two settings enabled on the report itself, the Playbook engine cannot guarantee the report's successful generation or parameter injection, and thus filters it out of the available selection list in the Run_report task.
In the Purdue model, at which level are physical assets like the Industrial Internet of Things (IIoT) placed? (Choose one answer)
Answer(s): D
According to the OT Security 7.6 Architect study guide regarding the Purdue Model:Asset Location: The study guide states that "All critical physical assets are located on the plant floor and equipped with IIoT sensors."Level Classification: The "plant floor" is further defined as the "control area zone," which consists of Levels 0, 1, and 2.Hierarchy: The "Operations & Control" zone is identified as Level 3 and Level 3.5.Direct Answer: In the "Introduction" lesson's Knowledge Check, the specific question "Inthe Purdue model, at which level are IIoTs placed?" is provided with the verified answer: Below Level 3.5.
Refer to the exhibit. A partial OT network is shown. You must improve the security of this OT network and implement internal segmentation between network 1 and network 2. How can you achieve the segmentation? (Choose one answer)
The correct answer is D. You can configure forward domain IDs for each network. The study guide explains that in FortiGate transparent mode, “all interfaces belong to the same broadcast domain, even interfaces with different VLAN IDs” and then states that you should “use this command to subdivide into multiple broadcast domains” with set forward-domain <domain_ID>. It further explains that “interfaces with the same domain ID belong to the same broadcast domain” and “traffic arriving on one interface is broadcast only to interfaces in the same forward domain ID.” This is exactly the mechanism used to separate one internal network from another and improve segmentation.The other options do not match this requirement. Universal ZTNA is described as controlling user access to applications, not segmenting two internal OT networks. An explicit software switch is for controlling intra-switch or intra-VLAN traffic inside the same software switch broadcast domain, which is more aligned with microsegmentation than separating two routed internal networks. One traffic VDOM does not create segmentation by itself; segmentation with VDOMs requires multiple VDOMs, not one. Therefore, the best choice for segmenting network 1 and network 2 in this scenario is to assign separate forward domain IDs.
Refer to the exhibit.A Virtual Patching profile is shown. You have recently updated your SCADA system and would like to apply the SCADA virtual patching profile. Which two statements about this profile are correct? (Choose two answers)
Answer(s): B,D
The correct answers are B and D.Option B is correct because the profile has Medium, High, and Critical selected, while Low severity is not selected. That means low-severity virtual patching signatures are not enforced by this profile. So for the device with MAC address 12:12:12:12:12, low-severity signatures are not blocked. The study guide explains virtual patching as device-specific protection where “FortiGate caches the signatures and mitigation rules that apply to each device” and applies them when the related traffic matches the firewall policy.Option D is correct because the Virtual Patching Exemptions table shows a row with the MAC address 11:11:11:11:11 and no specific signature listed. The study guide states that in the Virtual Patching profile you can “Exempt a specific device with the MAC address or a specific signature.” A MAC-only exemption means that specific device is excluded from virtual patching enforcement, so in practical terms it is treated as having no applicable vulnerabilities in this profile.Option C is incorrect because the profile does not block critical signatures for all devices. The exemptions list proves that at least one device can be excluded by MAC address, and a specific signature can also be exempted. Therefore, enforcement is not universal across all devices.Option A is incorrect because the entry Schneider.Electric.ClearSCADA.HTTP.Interface.XSS appears as a specific signature exemption, not as the only remaining vulnerability. The profile display is showing exemptions, not a statement that only one vulnerability is still present.
Refer to the exhibit.The OT devices behind the ruggedized FortiGate have vulnerabilities and you want to apply a virtual patching profile in the firewall policy. Why is Virtual Patching not available in the Security Profiles section? (Choose one answer)
Answer(s): A
The correct answer is A. You must enable Virtual Patching in the Feature Visibility section.The study guide states clearly that “By default, virtual patching profiles are hidden on the GUI, and you must enable them through System > Feature Visibility.” That exactly matches the situation in the exhibit, where Virtual Patching does not appear under Security Profiles. So the issue is not that the feature is unsupported, but that it is simply hidden in the GUI until it is enabled.The other options do not answer the question being asked. A valid OT security service license is required for virtual patching signatures and protection workflow, and OT signatures are relevant to IPS-based OT protection, but those do not explain why the menu item itself is missing from the Security Profiles section. The guide specifically identifies Feature Visibility as the reason the Virtual Patching profile is not shown in the GUI. Therefore, the required action is to enable Virtual Patching in System > Feature Visibility.
What are two advantages provided by industrial Ethernet? (Choose two answers)
The correct answers are B: Real-time control and D: Determinism. The study guide defines industrial Ethernet as the “use of Ethernet and TCP/IP as transport mechanisms for industrial protocols” and states that it provides “real-time control,” “low latency,” and “determinism (meaning reliable and predictable data delivery)” in harsh environments. It further explains that industrial Ethernet “provides deterministic communication between machine controllers, actuators, sensors, and other units.” These statements directly confirm that the two key advantages are real-time control and determinism.The other options are not supported by the study guide as core advantages of industrial Ethernet. Encryption is not listed as one of the benefits in this section, and remote access is discussed elsewhere in the OT architecture but not as a defining advantage of industrial Ethernet itself. The guide is explicit that the main benefits here are predictable delivery and real-time communication, which are essential in industrial control environments where timing and reliability matter.
Share your comments for Fortinet NSE6_OTS_AR-7.6 exam with other users:
i need the dumps !
very helpful
good source
my 3rd test and passed on first try. hats off to this brain dumps site.
please upload it
does anybody know if are these real exam questions?
are these questions similar to actual questions in the exam? because they seem to be too easy
i have a lot of experience but what comes in the exam is totally different from the practical day to day tasks. so i thought i would rather rely on these brain dumps rather failing the exam.
good questions
valied exam dumps. they were very helpful and i got a pretty good score. i am very grateful for this service and exam questions
will it help?
very useful to verify knowledge before exam
good stuffs
question 17 : responses arent b and c ?
just passed the exam on my first try using these dumps.
these questions look good.
this is very helpful content
please provide the dumps
it is amazing
quesion 178 about "a banking system that predicts whether a loan will be repaid is an example of the" the answer is classification. not regresion, you should fix it.
please upload apache spark dumps
q14 is b&c to reduce you will switch off mail for every single alert and you will switch on daily digest to get a mail once per day, you might even skip the empty digest mail but i see this as a part of the daily digest adjustment
i think it is good question
good for students who wish to give certification.
is there a google drive link to the images? the links in questions are not working.
very promising, looks great, so much wow!
i scored 87% on the az-204 exam. thanks! i always trust
good need more
sample questions seems good
huawei is ok
good one nice
please continue
this exam dumps just did the job. i donot want to ruffle your feathers but your exam dumps and mock test engine is amazing.
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your NSE6_OTS_AR-7.6, please sign in or create a free account.