Fortinet NSE 6 - FortiAuthenticator 6.4 NSE6_FAC-6.4 Dumps in PDF

Free Fortinet NSE6_FAC-6.4 Real Questions (page: 4)

Which network configuration is required when deploying FortiAuthenticator for portal services?

  1. FortiAuthenticator must have the REST API access enable on port1
  2. One of the DNS servers must be a FortiGuard DNS server
  3. Fortigate must be setup as default gateway for FortiAuthenticator
  4. Policies must have specific ports open between FortiAuthenticator and the authentication clients

Answer(s): D

Explanation:

When deploying FortiAuthenticator for portal services, such as guest portal, sponsor portal, user portal or FortiToken activation portal, the network configuration must allow specific ports to be open between FortiAuthenticator and the authentication clients. These ports are:

TCP 80 for HTTP access

TCP 443 for HTTPS access

TCP 389 for LDAP access

TCP 636 for LDAPS access

UDP 1812 for RADIUS authentication

UDP 1813 for RADIUS accounting


Reference:

https://docs.fortinet.com/document/fortiauthenticator/6.4.0/administration- guide/906179/portal-services#network-configuration



You are a FortiAuthenticator administrator for a large organization. Users who are configured to use FortiToken 200 for two-factor authentication can no longer authenticate. You have verified that only the users with two-factor authentication are experiencing the issue.

What can cause this issue?

  1. FortiToken 200 license has expired
  2. One of the FortiAuthenticator devices in the active-active cluster has failed
  3. Time drift between FortiAuthenticator and hardware tokens
  4. FortiAuthenticator has lost contact with the FortiToken Cloud servers

Answer(s): C

Explanation:

One possible cause of the issue is time drift between FortiAuthenticator and hardware tokens. Time drift occurs when the internal clocks of FortiAuthenticator and hardware tokens are not synchronized. This can result in mismatched one-time passwords (OTPs) generated by the hardware tokens and expected by FortiAuthenticator. To prevent this issue, FortiAuthenticator provides a time drift tolerance option that allows a certain number of seconds of difference between the clocks.


Reference:

https://docs.fortinet.com/document/fortiauthenticator/6.4.0/administration- guide/906179/two-factor-authentication#time-drift-tolerance



Why would you configure an OCSP responder URL in an end-entity certificate?

  1. To designate the SCEP server to use for CRL updates for that certificate
  2. To identify the end point that a certificate has been assigned to
  3. To designate a server for certificate status checking
  4. To provide the CRL location for the certificate

Answer(s): C

Explanation:

An OCSP responder URL in an end-entity certificate is used to designate a server for certificate status checking. OCSP stands for Online Certificate Status Protocol, which is a method of verifying whether a certificate is valid or revoked in real time. An OCSP responder is a server that responds to OCSP requests from clients with the status of the certificate in question. The OCSP responder URL in an end-entity certificate points to the location of the OCSP responder that can provide the status of that certificate.


Reference:

https://docs.fortinet.com/document/fortiauthenticator/6.4.0/administration- guide/906179/certificate-management#ocsp-responder



An administrator wants to keep local CA cryptographic keys stored in a central location.

Which FortiAuthenticator feature would provide this functionality?

  1. SCEP support
  2. REST API
  3. Network HSM
  4. SFTP server

Answer(s): C

Explanation:

Network HSM is a feature that allows FortiAuthenticator to keep local CA cryptographic keys stored in a central location. HSM stands for Hardware Security Module, which is a physical device that provides secure storage and generation of cryptographic keys. Network HSM allows FortiAuthenticator to use an external HSM device to store and manage the private keys of its local CAs, instead of storing them locally on the FortiAuthenticator device.


Reference:

https://docs.fortinet.com/document/fortiauthenticator/6.4.0/administration- guide/906179/certificate-management#network-hsm



Which option correctly describes an SP-initiated SSO SAML packet flow for a host without a SAML assertion?

  1. Service provider contacts idendity provider, idendity provider validates principal for service provider, service provider establishes communication with principal
  2. Principal contacts idendity provider and is redirected to service provider, principal establishes connection with service provider, service provider validates authentication with identify provider
  3. Principal contacts service provider, service provider redirects principal to idendity provider, after succesfull authentication identify provider redirects principal to service provider
  4. Principal contacts idendity provider and authenticates, identity provider relays principal to service provider after valid authentication

Answer(s): C

Explanation:

SP-initiated SSO SAML packet flow for a host without a SAML assertion is as follows:

Principal contacts service provider, requesting access to a protected resource.

Service provider redirects principal to identity provider, sending a SAML authentication request.

Principal authenticates with identity provider using their credentials.

After successful authentication, identity provider redirects principal back to service provider, sending a SAML response with a SAML assertion containing the principal's attributes.

Service provider validates the SAML response and assertion, and grants access to the principal.


Reference:

https://docs.fortinet.com/document/fortiauthenticator/6.4.0/administration- guide/906179/saml-service-provider#sp-initiated-sso



Share your comments for Fortinet NSE6_FAC-6.4 exam with other users:

R
RITEISH
12/24/2023 4:33:00 AM

thanks for the exact solution

S
SB
10/15/2023 7:58:00 AM

need to refer the questions and have to give the exam

M
Mike Derfalem
7/16/2023 7:59:00 PM

i need it right now if it was possible please

I
Isak
7/6/2023 3:21:00 AM

i need it very much please share it in the fastest time.

M
Maria
6/23/2023 11:40:00 AM

correct answer is d for student.java program

N
Nagendra Pedipina
7/12/2023 9:10:00 AM

q:37 c is correct

J
John
9/16/2023 9:37:00 PM

q6 exam topic: terramearth, c: correct answer: copy 1petabyte to encrypted usb device ???

S
SAM
12/4/2023 12:56:00 AM

explained answers

A
Andy
12/26/2023 9:35:00 PM

plan to take theaws certified developer - associate dva-c02 in the next few weeks

S
siva
5/17/2023 12:32:00 AM

very helpfull

M
mouna
9/27/2023 8:53:00 AM

good questions

B
Bhavya
9/12/2023 7:18:00 AM

help to practice csa exam

M
Malik
9/28/2023 1:09:00 PM

nice tip and well documented

R
rodrigo
6/22/2023 7:55:00 AM

i need the exam

D
Dan
6/29/2023 1:53:00 PM

please upload

A
Ale M
11/22/2023 6:38:00 PM

prepping for fsc exam

A
ahmad hassan
9/6/2023 3:26:00 AM

pd1 with great experience

Ž
Žarko
9/5/2023 3:35:00 AM

@t it seems like azure service bus message quesues could be the best solution

S
Shiji
10/15/2023 1:08:00 PM

helpful to check your understanding.

D
Da Costa
8/27/2023 11:43:00 AM

question 128 the answer should be static not auto

B
bot
7/26/2023 6:45:00 PM

more comments here

K
Kaleemullah
12/31/2023 1:35:00 AM

great support to appear for exams

B
Bsmaind
8/20/2023 9:26:00 AM

useful dumps

B
Blessious Phiri
8/13/2023 8:37:00 AM

making progress

N
Nabla
9/17/2023 10:20:00 AM

q31 answer should be d i think

V
vladputin
7/20/2023 5:00:00 AM

is this real?

N
Nick W
9/29/2023 7:32:00 AM

q10: c and f are also true. q11: this is outdated. you no longer need ownership on a pipe to operate it

N
Naveed
8/28/2023 2:48:00 AM

good questions with simple explanation

C
cert
9/24/2023 4:53:00 PM

admin guide (windows) respond to malicious causality chains. when the cortex xdr agent identifies a remote network connection that attempts to perform malicious activity—such as encrypting endpoint files—the agent can automatically block the ip address to close all existing communication and block new connections from this ip address to the endpoint. when cortex xdrblocks an ip address per endpoint, that address remains blocked throughout all agent profiles and policies, including any host-firewall policy rules. you can view the list of all blocked ip addresses per endpoint from the action center, as well as unblock them to re-enable communication as appropriate. this module is supported with cortex xdr agent 7.3.0 and later. select the action mode to take when the cortex xdr agent detects remote malicious causality chains: enabled (default)—terminate connection and block ip address of the remote connection. disabled—do not block remote ip addresses. to allow specific and known s

Y
Yves
8/29/2023 8:46:00 PM

very inciting

M
Miguel
10/16/2023 11:18:00 AM

question 5, it seems a instead of d, because: - care plan = case - patient = person account - product = product2;

B
Byset
9/25/2023 12:49:00 AM

it look like real one

D
Debabrata Das
8/28/2023 8:42:00 AM

i am taking oracle fcc certification test next two days, pls share question dumps

N
nITA KALE
8/22/2023 1:57:00 AM

i need dumps

AI Tutor 👋 I’m here to help!