Fortinet NSE 4 - FortiOS 7.2 NSE4_FGT-7.2 Exam Questions in PDF

Free Fortinet NSE4_FGT-7.2 Dumps Questions (page: 19)

An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192. 168. 1.0/24 and the remote quick mode selector is 192. 168.2.0/24.
Which subnet must the administrator configure for the local quick mode selector for site B?

  1. 192. 168. 1.0/24
  2. 192. 168.0.0/24
  3. 192. 168.2.0/24
  4. 192. 168.3.0/24

Answer(s): C

Explanation:

For an IPsec VPN between site A and site B, the administrator has configured the local quick mode selector for site A as 192.168.1.0/24 and the remote quick mode selector as 192.168.2.0/24. This means that the VPN will allow traffic to and from the 192.168.1.0/24 subnet at site A to reach the

192.168.2.0/24 subnet at site B.

To complete the configuration, the administrator must configure the local quick mode selector for site B. To do this, the administrator must use the same subnet as the remote quick mode selector for site A, which is 192.168.2.0/24. This will allow traffic to and from the 192.168.2.0/24 subnet at site B to reach the 192.168.1.0/24 subnet at site A.

Therefore, the administrator must configure the local quick mode selector for site B as 192.168.2.0/24.



Which two statements are true about the FGCP protocol? (Choose two.)

  1. FGCP elects the primary FortiGate device.
  2. FGCP is not used when FortiGate is in transparent mode.
  3. FGCP runs only over the heartbeat links.
  4. FGCP is used to discover FortiGate devices in different HA groups.

Answer(s): A,C

Explanation:

The FGCP (FortiGate Clustering Protocol) is a protocol that is used to manage high availability (HA) clusters of FortiGate devices. It performs several functions, including the following:

FGCP elects the primary FortiGate device: In an HA cluster, FGCP is used to determine which FortiGate device will be the primary device, responsible for handling traffic and making decisions about what to allow or block. FGCP uses a variety of factors, such as the device's priority, to determine which device should be the primary.

FGCP runs only over the heartbeat links: FGCP communicates between FortiGate devices in the HA cluster using the heartbeat links. These are dedicated links that are used to exchange status and control information between the devices. FGCP does not run over other types of links, such as data links.


Reference:

https://docs.fortinet.com/document/fortigate/6.4.0/ports-and-protocols/564712/fgcp-fortigate- clustering-protocol

FortiGate Infrastructure 7.2 Study Guide (p.292): "FortiGate HA uses the Fortinet-proprietary FortiGate Clustering Protocol (FGCP) to discover members, elect the primary FortiGate, synchronize data among members, and monitor the health of members. To discover and monitor members, the members broadcast heartbeat packets over all configured heartbeat interfaces."



Which two attributes are required on a certificate so it can be used as a CA certificate on SSL Inspection? (Choose two.)

  1. The keyUsage extension must be set to keyCertSign.
  2. The common name on the subject field must use a wildcard name.
  3. The issuer must be a public CA.
  4. The CA extension must be set to TRUE.

Answer(s): A,D

Explanation:

"In order for FortiGate to act in these roles, its CA certificate must have the basic constraints extension set to cA=True and the value of the keyUsage extension set to keyCertSign."


Reference:

https://www.reddit.com/r/fortinet/comments/c7j6jg/recommended_ssl_cert/



Which two inspection modes can you use to configure a firewall policy on a profile-based next- generation firewall (NGFW)? (Choose two.)

  1. Proxy-based inspection
  2. Certificate inspection
  3. Flow-based inspection
  4. Full Content inspection

Answer(s): A,C



Refer to the exhibit.



The Root and To_Internet VDOMs are configured in NAT mode. The DMZ and Local VDOMs are configured in transparent mode.
The Root VDOM is the management VDOM. The To_Internet VDOM allows LAN users to access the internet. The To_Internet VDOM is the only VDOM with internet access and is directly connected to ISP modem .

With this configuration, which statement is true?

  1. Inter-VDOM links are required to allow traffic between the Local and Root VDOMs.
  2. A static route is required on the To_Internet VDOM to allow LAN users to access the internet.
  3. Inter-VDOM links are required to allow traffic between the Local and DMZ VDOMs.
  4. Inter-VDOM links are not required between the Root and To_Internet VDOMs because the Root VDOM is used only as a management VDOM.

Answer(s): A


Reference:

https://kb.fortinet.com/kb/documentLink .do?externalID=FD46542



Share your comments for Fortinet NSE4_FGT-7.2 exam with other users:

A
Abduraimov
4/19/2023 12:43:00 AM

preparing for this exam is overwhelming. you cannot pass without the help of these exam dumps.

P
Puneeth
10/5/2023 2:06:00 AM

new to this site but i feel it is good

A
Ashok Kumar
1/2/2024 6:53:00 AM

the correct answer to q8 is b. explanation since the mule app has a dependency, it is necessary to include project modules and dependencies to make sure the app will run successfully on the runtime on any other machine. source code of the component that the mule app is dependent of does not need to be included in the exported jar file, because the source code is not being used while executing an app. compiled code is being used instead.

M
Merry
7/30/2023 6:57:00 AM

good questions

V
VoiceofMidnight
12/17/2023 4:07:00 PM

Delayed the exam until December 29th.

U
Umar Ali
8/29/2023 2:59:00 PM

A and D are True

V
vel
8/28/2023 9:17:09 AM

good one with explanation

G
Gurdeep
1/18/2024 4:00:15 PM

This is one of the most useful study guides I have ever used.

AI Tutor 👋 I’m here to help!