Fortinet FCP - FortiGate 7.4 Administrator FCP_FGT_AD-7.4 Dumps in PDF

Free Fortinet FCP_FGT_AD-7.4 Real Questions (page: 17)

Refer to the exhibits.

The exhibits show the application sensor configuration and the Excessive-Bandwidth and Apple filter details.

Based on the configuration, what will happen to Apple FaceTime if there are only a few calls originating or incoming?

  1. Apple FaceTime will be allowed, based on the Video/Audio category configuration.
  2. Apple FaceTime will be allowed, based on the Apple filter configuration.
  3. Apple FaceTime will be allowed only if the Apple filter in Application and Filter Overrides is set to Allow.
  4. Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration.

Answer(s): D

Explanation:

Based on the application sensor configuration and the filter details:
D . Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration: The "Excessive-Bandwidth" filter is set to block, which includes "FaceTime" under its application signature. As a result, FaceTime will be blocked regardless of the "Apple" filter configuration because the "Excessive-Bandwidth" filter takes precedence due to its block action setting.
The other options are not correct:
A . Apple FaceTime will be allowed, based on the Video/Audio category configuration: The Video/Audio category is not relevant because FaceTime is specifically included in the Excessive- Bandwidth filter, which blocks it.
B . Apple FaceTime will be allowed, based on the Apple filter configuration: Although the Apple filter is set to monitor, the block action of the Excessive-Bandwidth filter will override this. C . Apple FaceTime will be allowed only if the Apple filter in Application and Filter Overrides is set to Allow: The allow setting for the Apple filter is irrelevant in this context, as the block action in the Excessive-Bandwidth filter will prevail.


Reference:

FortiOS 7.4.1 Administration Guide - Application Control and Filtering, page 978. FortiOS 7.4.1 Administration Guide - Application Sensor Configuration, page 982.



An employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent SSL VPN negotiation failure?

  1. SSL VPN idle-timeout
  2. SSL VPN login-timeout
  3. SSL VPN dtls-hello-timeout
  4. SSL VPN session-ttl

Answer(s): C

Explanation:

For a high-latency internet connection, the SSL VPN setting that should be adjusted is:
C . SSL VPN dtls-hello-timeout: This setting determines how long the FortiGate will wait for a DTLS hello message from the client. For high-latency connections, increasing this timeout will prevent SSL VPN negotiation failures caused by delays in receiving the DTLS hello message.
The other options are not suitable:
A . SSL VPN idle-timeout: This setting controls the idle time allowed before a session is terminated, which is not relevant to the initial connection establishment. B . SSL VPN login-timeout: This setting controls the maximum time allowed for a user to log in, but does not affect connection negotiation.
D . SSL VPN session-ttl: This setting controls the total time-to-live for an SSL VPN session but does not directly address issues caused by high latency.


Reference:

FortiOS 7.4.1 Administration Guide - SSL VPN Configuration, page 1415.



When FortiGate performs SSL/SSH full inspection, you can decide how it should react when it detects an invalid certificate.
Which three actions are valid actions that FortiGate can perform when it detects an invalid certificate? (Choose three.)

  1. Allow & Warning
  2. Trust & Allow
  3. Allow
  4. Block & Warning
  5. Block

Answer(s): A,D,E

Explanation:

When FortiGate performs SSL/SSH full inspection and detects an invalid certificate, there are three valid actions it can take:
Allow & Warning: This action allows the session but generates a warning. Block & Warning: This action blocks the session and generates a warning. Block: This action blocks the session without generating a warning. Actions such as "Trust & Allow" or just "Allow" without additional configurations are not applicable in the context of handling invalid certificates.


Reference:

FortiOS 7.4.1 Administration Guide: Configuring SSL/SSH inspection profile



Refer to the exhibit, which shows the IPS sensor configuration.



If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.)

  1. The sensor will gather a packet log for all matched traffic.
  2. The sensor will reset all connections that match these signatures.
  3. The sensor will allow attackers matching the Microsoft.Windows.iSCSl.Target.DoS signature.
  4. The sensor will block all attacks aimed at Windows servers.

Answer(s): A,C

Explanation:

The IPS sensor configuration shows that:
The Microsoft.Windows.iSCSI.Target.DoS signature is set to "Monitor" with packet logging enabled, meaning that while traffic matching this signature will be allowed, it will also be logged for further analysis.
The generic Windows filter is set to "Block," meaning that all other attacks matching this filter will be blocked. However, the sensor will not reset connections or log packets unless specified. Therefore, the sensor will allow attackers matching the specific DoS signature while blocking other attacks against Windows.


Reference:

FortiOS 7.4.1 Administration Guide: IPS Configuration



Which statement is a characteristic of automation stitches?

  1. They can be run only on devices in the Security Fabric.
  2. They can be created only on downstream devices in the fabric.
  3. They can have one or more triggers.
  4. They can run multiple actions at the same time.

Answer(s): C

Explanation:

Automation stitches on FortiGate can have one or more triggers, which are conditions or events that activate the automation stitch. The trigger defines when the automation stitch should execute the defined actions. Actions within a stitch can be executed sequentially or in parallel, depending on the configuration.


Reference:

FortiOS 7.4.1 Administration Guide: Automation Stitches



Share your comments for Fortinet FCP_FGT_AD-7.4 exam with other users:

K
kanjoe
7/2/2023 11:40:00 AM

good questons

M
Mahmoud
7/6/2023 4:24:00 AM

i need the dumb of the hcip security v4.0 exam

W
Wei
8/3/2023 4:18:00 AM

upload the dump please

S
Stephen
10/3/2023 6:24:00 PM

yes, iam looking this

S
Stephen
8/4/2023 9:08:00 PM

please upload cima e2 managing performance dumps

H
hp
6/16/2023 12:44:00 AM

wonderful questions

P
Priyo
11/14/2023 2:23:00 AM

i used this site since 2000, still great to support my career

J
Jude
8/29/2023 1:56:00 PM

why is the answer to "which of the following is required by scrum?" all of the following stated below since most of them are not mandatory? sprint retrospective. members must be stand up at the daily scrum. sprint burndown chart. release planning.

M
Marc blue
9/15/2023 4:11:00 AM

great job. hope this helps out.

A
Anne
9/13/2023 2:33:00 AM

upload please. many thanks!

P
pepe el toro
9/12/2023 7:55:00 PM

this is so interesting

A
Antony
11/28/2023 12:13:00 AM

great material thanks

T
Thembelani
5/30/2023 2:22:00 AM

anyone who wrote this exam recently

P
P
9/16/2023 1:27:00 AM

ok they re good

J
Jorn
7/13/2023 5:05:00 AM

relevant questions

A
AM
6/20/2023 7:54:00 PM

please post

N
Nagendra Pedipina
7/13/2023 2:22:00 AM

q:42 there has to be a image in the question to choose what does it mean from the options

B
BrainDumpee
11/18/2023 1:36:00 PM

looking for cphq dumps, where can i find these for free? please and thank you.

S
sheik
10/14/2023 11:37:00 AM

@aarun , thanks for the information. it would be great help if you share your email

R
Random user
12/11/2023 1:34:00 AM

1z0-1078-23 need this dumps

L
labuschanka
11/16/2023 6:06:00 PM

i gave the microsoft azure az-500 tests and prepared from this site as it has latest mock tests available which helped me evaluate my performance and score 919/1000

M
Marianne
10/22/2023 11:57:00 PM

i cannot see the button to go to the questions

S
sushant
6/28/2023 4:52:00 AM

good questions

A
A\MAM
6/27/2023 5:17:00 PM

q-6 ans-b correct. https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-cli-quick-start/use-the-cli/commit-configuration-changes

U
unanimous
12/15/2023 6:38:00 AM

very nice very nice

A
akminocha
9/28/2023 10:36:00 AM

please help us with 1z0-1107-2 dumps

J
Jefi
9/4/2023 8:15:00 AM

please upload the practice questions

T
Thembelani
5/30/2023 2:45:00 AM

need this dumps

A
Abduraimov
4/19/2023 12:43:00 AM

preparing for this exam is overwhelming. you cannot pass without the help of these exam dumps.

P
Puneeth
10/5/2023 2:06:00 AM

new to this site but i feel it is good

A
Ashok Kumar
1/2/2024 6:53:00 AM

the correct answer to q8 is b. explanation since the mule app has a dependency, it is necessary to include project modules and dependencies to make sure the app will run successfully on the runtime on any other machine. source code of the component that the mule app is dependent of does not need to be included in the exported jar file, because the source code is not being used while executing an app. compiled code is being used instead.

M
Merry
7/30/2023 6:57:00 AM

good questions

V
VoiceofMidnight
12/17/2023 4:07:00 PM

Delayed the exam until December 29th.

U
Umar Ali
8/29/2023 2:59:00 PM

A and D are True

AI Tutor 👋 I’m here to help!