English Test Preparation TOEFL Reading Comprehension TOEFL Reading Comprehension Dumps in PDF

Free English Test Preparation TOEFL Reading Comprehension Real Questions (page: 12)

The discoveries of the white dwarf, the neutron star, and the black hole, coming well after the discovery of the red giant are among eh most exciting developments in decades because they may be well present physicists with their greatest challenge since the failure of classical mechanics. In the life cycle of the star, after all of the hydrogen and helium fuel has been burned, the delicate balance between the outer nuclear radiation. Pressure and the stable gravitational force becomes disturbed and slow contraction begins. As compression increases, very dense plasma forms. If the initial star had mass of less than 1.4 solar masses (1.4 times the mass of our sun), the process ceases at the density of 1,000 tons per cubic inch, and the star becomes the white dwarf.

However, if the star was originally more massive, the white dwarf plasma can’t resist the gravitations pressures, and in rapid collapse, all nuclei of the star are converted to a gas of free neutrons. Gravitational attraction compresses this neutron gas rapidly until a density of 10 tons per cubic inch is reached; at this point the strong nuclear force resists further contraction. If the mass of the star was between 1.4 and a few solar masses, the process stops here, and we have a neutron star. But if the original star was more massive than a few solar masses, even the strong nuclear forces cannot resist the gravitational brunch. The neutrons are forced into one another to form heavier hadrons and these in turn coalesce to form heavier entities, of which we as yet know nothing. At this point, a complete collapse of the stellar mass occurs; existing theories predict a collapse to infinite density and infinitely small dimensions Well before this, however, the surface gravitational force would become so strong that no signal could ever leave the star - any photon emitted would fall back under gravitational attraction – and the star would become black hole in space. This gravitational collapse poses a fundamental challenge to physics. When the most widely accepted theories predict such improbable things as infinite density and infinitely small dimensions, it simply means that we are missing some vital insight. This last happened in physics in the 1930’s, when we faced the fundamental paradox concerning atomic structure. At that time, it was recognized that electrons moved in table orbits about nuclei in atoms. However, it was also recognized that if charge is accelerated, as it must be to remain in orbit, it radiates energy; so, theoretically, the electron would be expected eventually to spiral into the nucleus and destroy the atom. Studies centered around this paradox led to the development of quantum mechanics. It may well be that an equivalent t advance awaits us in investigating the theoretical problems presented by the phenomenon of gravitational collapse.

According to the passage, in the final stages of its development our own sun is likely to take the form of a:

  1. white dwarf
  2. neutron star
  3. red giant
  4. gas of free neutrons
  5. black hole

Answer(s): A



The discoveries of the white dwarf, the neutron star, and the black hole, coming well after the discovery of the red giant are among eh most exciting developments in decades because they may be well present physicists with their greatest challenge since the failure of classical mechanics. In the life cycle of the star, after all of the hydrogen and helium fuel has been burned, the delicate balance between the outer nuclear radiation. Pressure and the stable gravitational force becomes disturbed and slow contraction begins. As compression increases, very dense plasma forms. If the initial star had mass of less than 1.4 solar masses (1.4 times the mass of our sun), the process ceases at the density of 1,000 tons per cubic inch, and the star becomes the white dwarf.

However, if the star was originally more massive, the white dwarf plasma can’t resist the gravitations pressures, and in rapid collapse, all nuclei of the star are converted to a gas of free neutrons. Gravitational attraction compresses this neutron gas rapidly until a density of 10 tons per cubic inch is reached; at this point the strong nuclear force resists further contraction. If the mass of the star was between 1.4 and a few solar masses, the process stops here, and we have a neutron star. But if the original star was more massive than a few solar masses, even the strong nuclear forces cannot resist the gravitational brunch. The neutrons are forced into one another to form heavier hadrons and these in turn coalesce to form heavier entities, of which we as yet know nothing. At this point, a complete collapse of the stellar mass occurs; existing theories predict a collapse to infinite density and infinitely small dimensions Well before this, however, the surface gravitational force would become so strong that no signal could ever leave the star - any photon emitted would fall back under gravitational attraction – and the star would become black hole in space. This gravitational collapse poses a fundamental challenge to physics. When the most widely accepted theories predict such improbable things as infinite density and infinitely small dimensions, it simply means that we are missing some vital insight. This last happened in physics in the 1930’s, when we faced the fundamental paradox concerning atomic structure. At that time, it was recognized that electrons moved in table orbits about nuclei in atoms. However, it was also recognized that if charge is accelerated, as it must be to remain in orbit, it radiates energy; so, theoretically, the electron would be expected eventually to spiral into the nucleus and destroy the atom. Studies centered around this paradox led to the development of quantum mechanics. It may well be that an equivalent t advance awaits us in investigating the theoretical problems presented by the phenomenon of gravitational collapse.

According to the passage, an imbalance arises between nuclear radiation pressure and gravitational force in stars because

  1. the density of a star increases as it ages
  2. radiation pressure increases as a star increases in mass
  3. radiation pressure decreases when a star's fuel has been consumed
  4. the collapse of a star increases its gravitational force.
  5. dense plasma decreases the star's gravitational force.

Answer(s): C



The discoveries of the white dwarf, the neutron star, and the black hole, coming well after the discovery of the red giant are among eh most exciting developments in decades because they may be well present physicists with their greatest challenge since the failure of classical mechanics. In the life cycle of the star, after all of the hydrogen and helium fuel has been burned, the delicate balance between the outer nuclear radiation. Pressure and the stable gravitational force becomes disturbed and slow contraction begins. As compression increases, very dense plasma forms. If the initial star had mass of less than 1.4 solar masses (1.4 times the mass of our sun), the process ceases at the density of 1,000 tons per cubic inch, and the star becomes the white dwarf.

However, if the star was originally more massive, the white dwarf plasma can’t resist the gravitations pressures, and in rapid collapse, all nuclei of the star are converted to a gas of free neutrons. Gravitational attraction compresses this neutron gas rapidly until a density of 10 tons per cubic inch is reached; at this point the strong nuclear force resists further contraction. If the mass of the star was between 1.4 and a few solar masses, the process stops here, and we have a neutron star. But if the original star was more massive than a few solar masses, even the strong nuclear forces cannot resist the gravitational brunch. The neutrons are forced into one another to form heavier hadrons and these in turn coalesce to form heavier entities, of which we as yet know nothing. At this point, a complete collapse of the stellar mass occurs; existing theories predict a collapse to infinite density and infinitely small dimensions Well before this, however, the surface gravitational force would become so strong that no signal could ever leave the star - any photon emitted would fall back under gravitational attraction – and the star would become black hole in space. This gravitational collapse poses a fundamental challenge to physics. When the most widely accepted theories predict such improbable things as infinite density and infinitely small dimensions, it simply means that we are missing some vital insight. This last happened in physics in the 1930’s, when we faced the fundamental paradox concerning atomic structure. At that time, it was recognized that electrons moved in table orbits about nuclei in atoms. However, it was also recognized that if charge is accelerated, as it must be to remain in orbit, it radiates energy; so, theoretically, the electron would be expected eventually to spiral into the nucleus and destroy the atom. Studies centered around this paradox led to the development of quantum mechanics. It may well be that an equivalent t advance awaits us in investigating the theoretical problems presented by the phenomenon of gravitational collapse.

The author asserts that the discoveries of the white dwarf, the neutron star, and the black hole are significant because these discoveries.

  1. demonstrate the probability of infinite density and infinitely small dimensions
  2. pose the most comprehensive and fundamental problem faced by physicists in decades
  3. clarify the paradox suggested by the collapse of electrons into atomic nuclei.
  4. establish the relationship between the mass and gravitational pressure.
  5. assist in establishing the age of the universe by tracing the life histories of stars.

Answer(s): B



Recent years have brought minority-owned businesses in the United States unprecedented opportunities-as well as new and significant risks. Civil rights activists have long argued that one of the principal reasons why Blacks, Hispanics and the other minority groups have difficulty establishing themselves in business is that they lack access to the sizable orders and subcontracts that are generated by large companies. Now congress, in apparent agreement, has required by law that businesses awarded federal contracts of more than $500,000 do their best to find minority subcontractors and record their efforts to do so on forms field with the government.

Indeed, some federal and local agencies have gone so far as to set specific percentage goals for apportioning parts of public works contracts to minority enterprises.

Corporate response appears to have been substantial. According to figures collected in 1977, the total of corporate contracts with minority business rose from $77 to $1. 1 billion in 1977. The projected total of corporate contracts with minority business for the early 1980’s is estimated to be over $3 billion per year with no letup anticipated in the next decade. Promising as it is for minority businesses, this increased patronage poses dangers for them, too. First, minority firms risk expanding too fast and overextending themselves financially, since most are small concerns and, unlike large businesses they often need to make substantial investments in new plants, staff, equipment, and the like in order to perform work subcontracted to them. If, thereafter, their subcontracts are for some reason reduced, such firms can face potentially crippling fixed expenses. The world of corporate purchasing can be frustrating for small entrepreneurs who get requests for elaborate formal estimates and bids. Both consume valuable time and resources and a small company’s efforts must soon result in orders, or both the morale and the financial health of the business will suffer.

A second risk is that White-owned companies may-seek to cash inon the increasing apportionments through formation of joint ventures with minority-owned concerns, of course, in many instances there are legitimate reasons for joint ventures; clearly, white and minority enterprises can team up to acquire business that neither could Third, a minority enterprise that secures the business of one large corporate customer often runs the danger of becoming – and remaining dependent. Even in the best of circumstances, fierce competition from larger, more established companies makes it difficult for small concerns to broaden their customer bases; when such firms have nearly guaranteed orders from a single corporate benefactor, they may truly have to struggle against complacency arising from their current success.
The primary purpose of the passage is to

  1. present a commonplace Idea and its inaccuracies
  2. describe a situation and its potential drawbacks
  3. propose a temporary solution to a problem
  4. analyze a frequent source to a problem
  5. explore the implications of a findings.

Answer(s): B



Recent years have brought minority-owned businesses in the United States unprecedented opportunities-as well as new and significant risks. Civil rights activists have long argued that one of the principal reasons why Blacks, Hispanics and the other minority groups have difficulty establishing themselves in business is that they lack access to the sizable orders and subcontracts that are generated by large companies. Now congress, in apparent agreement, has required by law that businesses awarded federal contracts of more than $500,000 do their best to find minority subcontractors and record their efforts to do so on forms field with the government.
Indeed, some federal and local agencies have gone so far as to set specific percentage goals for apportioning parts of public works contracts to minority enterprises.

Corporate response appears to have been substantial. According to figures collected in 1977, the total of corporate contracts with minority business rose from $77 to $1. 1 billion in 1977. The projected total of corporate contracts with minority business for the early 1980’s is estimated to be over $3 billion per year with no letup anticipated in the next decade. Promising as it is for minority businesses, this increased patronage poses dangers for them, too. First, minority firms risk expanding too fast and overextending themselves financially, since most are small concerns and, unlike large businesses they often need to make substantial investments in new plants, staff, equipment, and the like in order to perform work subcontracted to them. If, thereafter, their subcontracts are for some reason reduced, such firms can face potentially crippling fixed expenses. The world of corporate purchasing can be frustrating for small entrepreneurs who get requests for elaborate formal estimates and bids. Both consume valuable time and resources and a small company’s efforts must soon result in orders, or both the morale and the financial health of the business will suffer.

A second risk is that White-owned companies may-seek to cash inon the increasing apportionments through formation of joint ventures with minority-owned concerns, of course, in many instances there are legitimate reasons for joint ventures; clearly, white and minority enterprises can team up to acquire business that neither could Third, a minority enterprise that secures the business of one large corporate customer often runs the danger of becoming – and remaining dependent. Even in the best of circumstances, fierce competition from larger, more established companies makes it difficult for small concerns to broaden their customer bases; when such firms have nearly guaranteed orders from a single corporate benefactor, they may truly have to struggle against complacency arising from their current success.

The passage supplies information that would answer which of the following questions?

  1. What federal agencies have set percentage goals for the use of minority owned businesses in public works contracts?
  2. To which governments agencies must businesses awarded federal contracts report their efforts to find minority subcontractors?
  3. How widespread is the use of minority-owned concerns as "fronts; by White backers seeking to obtain subcontracts?
  4. How many more minority owned businesses were there in 1977 than in 1972?
  5. What is one set of conditions under which a small business might find itself financially overextended?

Answer(s): E



Share your comments for English Test Preparation TOEFL Reading Comprehension exam with other users:

A
AI Tutor Explanation
4/29/2026 5:25:25 AM

Question 1:

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct

A
AI Tutor Explanation
4/29/2026 5:23:14 AM

Question 5:

  • Correct answer: A. User4 and User1 only

  • Why this is correct:
- The Automatic Enrollment setting in Intune has MDM user scope: GroupA. Only users in GroupA can enroll devices via MDM auto-enrollment. - Device6 will be enrolled via Windows Autopilot and Intune, so enrollment is allowed only for users in GroupA. - Based on the group memberships in the scenario, User4 and User1 are in GroupA, while User2 and User3 are not. Therefore only User4 and User1 can enroll Device6.
  • Quick tip for the exam:
- Remember: MDM user scope determines who can auto-enroll devices; MAM scope controls app protection enrollment. When a new Autopilot device is enrolled, the signing-in user must be in the MDM scope.

A
AI Tutor Explanation
4/29/2026 5:17:10 AM

Why this is correct

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct:
- Windows Autopilot requires devices to be registered by their hardware IDs (hash) before Autopilot can deploy Windows 10 Enterprise. - Collect the hardware IDs from the new Phoenix machines, save them in a CSV, and upload that CSV in the Intune/Windows Autopilot area. This maps each device to an Autopilot deployment profile. - After registration, you can assign Autopilot profiles (Windows 10 Enterprise, etc.). Other options (serial number CSV, generalizing, or Mobility settings) are not the initial Autopilot registration steps.

A
AI Tutor Explanation
4/25/2026 1:53:46 PM

Question 7:

  • Correct answer: B — A risk score is computed based on the number of remediations needed compared to the industry peer average.

Explanation:
  • Risk360 uses a remediation-based score. It benchmarks how many actions are required to fix issues against peers, giving a relative risk posture.
  • Why not the others:
- A: Not just total risk events by location. - C: Time to mitigate isn’t the primary scoring method. - D: Not a four-stage breach scoring approach.
Note: The page text shows a mismatch (it lists D as the answer), but the study guide describes the remediation-based scoring (B) as the correct concept.

A
AI Tutor Explanation
4/25/2026 1:42:20 PM

Question 104:

  • Correct answer: D) Multi-Terabyte (TB) Range

  • Brief explanation:
- clustering keys organize data into micro-partitions to improve pruning when queries filter on those columns. - The performance benefit is most significant for very large tables; for small tables the overhead of maintaining clustering outweighs gains. - Therefore, as a best practice, define clustering keys on tables at the TB scale.

C
Community Helper
4/25/2026 2:03:10 AM

Q23: Fabric Admin is correct. Because Domain admin cannot create domains. Only Fabric Admin can among the given options. Q51: Wrapping @pipeline.parameter.param1 inside {} will return a string. But question requires the expression to return Int, so correct answer should be @pipeline.parameter.param1 (no {})

A
AI Tutor Explanation
4/23/2026 3:07:03 PM

Question 62:

  • Correct answer: D (per the page)

  • Note: The explanation text on the page describes option B (use ZDX score and Analyze Score to trigger the Y Engine analysis), indicating a mismatch between the stated answer and the rationale.

  • Key concept: For fast root-cause analysis, leverage telemetry and auto-correlated insights:
- Use the user’s ZDX score for AWS and run Analyze Score to activate the Y Engine, which correlates metrics across network, client, and application to pinpoint the issue quickly.
  • Why the other options are less effective:
- A: Only checks for outages; doesn’t provide actionable root-cause analysis. - C: Deep Trace helps visibility but is manual and time-consuming. - D: Packet capture is invasive and slow; not the quickest path to root cause.

A
AI Tutor Explanation
4/23/2026 12:26:21 PM

Question 32:

  • Answer: A (2.4GHz)

  • Why: Lower-frequency signals have longer wavelengths and experience less attenuation when passing through walls and obstacles. Higher frequencies (5GHz, 6GHz) are more easily blocked by walls. NFC operates over very short distances and is not meant to penetrate walls. So 2.4 GHz best penetrates physical objects like walls.

A
AI Tutor Explanation
4/21/2026 8:48:36 AM

Question 3:

  • False is the correct answer (Option B).

Why:
  • In Snowflake, a database is a metadata object that exists within a single Snowflake account. Accounts are isolated—there isn’t one database that lives in multiple accounts.
  • You can access data across accounts via data sharing or database replication, but these create separate database objects in the other accounts (e.g., a database in the consumer account created from a share), not a single shared database across accounts.

So a single database cannot exist in more than one Snowflake account.

A
Anonymous User
4/16/2026 10:54:18 AM

Question 1:

  • Correct answer: Edate = sys.argv[1]
  • Why this is correct:
- When a Databricks Job passes parameters to a notebook, those parameters are supplied to the notebook's Python process as command-line arguments. The first argument after the script name is sys.argv[1], so date = sys.argv[1] captures the passed date value directly.
  • How it compares to other options:
- date = spark.conf.get("date") reads from Spark config, not from job parameters. - input() waits for user input at runtime, which isn’t how job parameters are provided. - date = dbutils.notebooks.getParam("date") would work if the notebook were invoked via dbutils.notebook.run with parameters, not

A
Anonymous User
4/15/2026 4:42:07 AM

Question 528:

  • Correct answer: NSG flow logs for NSG1 (Option B)

  • Why:
- Traffic Analytics uses NSG flow logs to analyze traffic patterns. You must have NSG flow logs enabled for the NSGs you want to monitor. - An Azure Log Analytics workspace is also required to store and query the traffic data. - Network Watcher must be available in the subscription for traffic analytics to function.
  • What to configure (brief steps):
- Ensure Network Watcher is enabled in the East US region (for the subscription/region). - Enable NSG flow logs on NSG1. - Ensure a Log Analytics workspace exists and is accessible (read/write) so Traffic Analytics can store and query logs.
  • Why other options aren’t correct:
- “Diagnostic settings for VM1” or “Diagnostic settings for NSG1” alone don’t guarantee flow logs are captured and sent to Log Analytics, which Traffic Analytics relies on. - “Insights for VM1” is not how Traffic Analytics collects traffic data.

A
Anonymous User
4/15/2026 2:43:53 AM

Question 23:
The correct answer is Domain admin (option B), not Fabric admin.

  • Domain admin provides domain-level management: create domains/subdomains and assign workspaces within those domains, which matches the tasks while following least privilege.
  • Fabric admin is global-level access and is more privileges than needed for this scenario (it would grant broader control across the Fabric environment).

A
Anonymous User
4/14/2026 12:31:34 PM

Question 2:
For question 2, the key concept is the Longest Prefix Match. Routers pick the route whose subnet mask is the most specific (largest prefix length) that still matches the destination IP.
From the options:

  • A) 10.10.10.0/28 ? 10.10.10.0–10.10.10.15
  • B) 10.10.13.0/25 ? 10.10.13.0–10.10.13.127
  • C) 10.10.13.144/28 ? 10.10.13.144–10.10.13.159
  • D) 10.10.13.208/29 ? 10.10.13.208–10.10.13.215

The destination Host A’s IP must fall within 10.10.13.208–10.10.13.215 for the /29 to be the best match. Since /29 is the longest prefix among the matching options, Router1 will use 10.10.13.208/29.
Thus, the correct answer is D.

S
srameh
4/14/2026 10:09:29 AM

Question 3:

  • Correct answer: Phase 4, Post Accreditation

  • Explanation:
- In DITSCAP, the four phases are: - Phase 1: Definition (concept and requirements) - Phase 2: Verification (design and testing) - Phase 3: Validation (fielding and evaluation) - Phase 4: Post Accreditation (ongoing operations and lifecycle management) - The description—continuing operation of an accredited IT system and addressing changing threats throughout its life cycle—fits the Post Accreditation phase, which covers operations, maintenance, monitoring, and reauthorization as threats and environment evolve.

O
onibokun10
4/13/2026 7:50:14 PM

Question 129:
Correct answer: CNAME

  • A CNAME record creates an alias for a domain, so newapplication.comptia.org will resolve to whatever IP address www.comptia.org resolves to. This ensures both names point to the same resource without duplicating the IP.
  • Why not the others:
- SOA defines authoritative information for a zone. - MX specifies mail exchange servers. - NS designates name servers for a zone.
  • Notes: The alias name (newapplication.comptia.org) should not have other records if you use a CNAME for it, and CNAMEs aren’t used for the zone apex (root) domain. This scenario uses a subdomain, so a CNAME is appropriate.

A
Anonymous User
4/13/2026 6:29:58 PM

Question 1:

  • Correct answer: C

  • Why this is best:
- Uses OS Login with IAM, so SSH access is granted via Google accounts rather than distributing per-user SSH keys. - Granting the compute.osAdminLogin role to a Google group gives admin access to all team members in a centralized, auditable way. - Access is auditable: Cloud Audit Logs show who accessed which VM, satisfying the security requirement to determine who accessed a given instance.
  • How it works:
- Enable OS Login on the project/instances (enable-oslogin metadata). - Add the team’s

A
Anonymous User
4/13/2026 1:00:51 PM

Question 2:

  • Answer: D. Azure Advisor

  • Why: To view security-related recommendations for resources in the Compute and Apps area (including App Service Web Apps and Functions), you use Azure Advisor. Advisor surfaces personalized best-practice recommendations across resources, including security, and shows which resources are affected and the severity.

  • Why not the others:
- Azure Log Analytics is for ad-hoc querying of telemetry, not for viewing security recommendations. - Azure Event Hubs is for streaming telemetry data, not for security recommendations.
  • Quick tip: In the portal, navigate to Azure Advisor and check the Security recommendations for App Services to see actionable items and affe

D
Don
4/11/2026 5:36:42 AM

Recommend using AI for Solutions rather the Answer(s) submitted here

M
Mogae Malapela
4/8/2026 6:37:56 AM

This is very interesting

A
Anon
4/6/2026 5:22:54 PM

Are these the same questions you have to pay for in ExamTopics?

L
LRK
3/22/2026 2:38:08 PM

For Question 7 - while the answer description indicates the correct answer, the option no. mentioned is incorrect. Nice and Comprehensive. Thankyou

R
Rian
3/19/2026 9:12:10 AM

This is very good and accurate. Explanation is very helpful even thou some are not 100% right but good enough to pass.

G
Gerrard
3/18/2026 6:58:37 AM

The DP-900 exam can be tricky if you aren't familiar with Microsoft’s specific cloud terminology. I used the practice questions from free-braindumps.com and found them incredibly helpful. The site breaks down core data concepts and Azure services in a way that actually mirrors the real test. As a resutl I passed my exam.

V
Vineet Kumar
3/6/2026 5:26:16 AM

interesting

J
Joe
1/20/2026 8:25:24 AM

Passed this exam 2 days ago. These questions are in the exam. You are safe to use them.

N
NJ
12/24/2025 10:39:07 AM

Helpful to test your preparedness before giving exam

A
Ashwini
12/17/2025 8:24:45 AM

Really helped

J
Jagadesh
12/16/2025 9:57:10 AM

Good explanation

S
shobha
11/29/2025 2:19:59 AM

very helpful

P
Pandithurai
11/12/2025 12:16:21 PM

Question 1, Ans is - Developer,Standard,Professional Direct and Premier

E
Einstein
11/8/2025 4:13:37 AM

Passed this exam in first appointment. Great resource and valid exam dump.

D
David
10/31/2025 4:06:16 PM

Today I wrote this exam and passed, i totally relay on this practice exam. The questions were very tough, these questions are valid and I encounter the same.

T
Thor
10/21/2025 5:16:29 AM

Anyone used this dump recently?

V
Vladimir
9/25/2025 9:11:14 AM

173 question is A not D

AI Tutor 👋 I’m here to help!