Palo Alto Networks

CIPS L4M1 Exam (page: 2)
CIPS Scope and Influence of Procurement and Supply
Updated on: 25-Dec-2025

Viewing Page 2 of 9 Pages

L4M1 PDF with 40 Questions

QUESTION: 6

Explain, with examples, the three different ways one can categorise procurement spend: direct vs indirect, capital expenditure vs operational expenditure and stock vs non-stock items. (25 points)

See Explanation section for answer.

Answer(s): A

Explanation:

The knowledge to remember:

.

Essay Plan :
Remember to include examples for each of the six categories of spend. This is specifically asked for in the question so it's important to include as many examples as you can. To do this you could take an example organisation such as a cake manufacturer and explain which of their purchases would fall into each category and why.
Introduction explain why procurement categorises spend
- Direct these are items that are incorporated into the final goods (the cakes) so would include raw materials such as flour, eggs, sugar etc
- Indirect these are items that the company needs, but don't go into the end product. For example, cleaning products and MRO supplies for the machines
- Capital Expenditure- these are large one-off purchases, such as buying a new piece of equipment such as a giant oven to cook the cakes.
- Operational Expenditure these are purchases that are required to ensure the business can function day-to-day. They may include PPE for the workers in the factory and cleaning equipment
- Stock items these are items procured in advance and held in inventory until they are needed. In a cake manufacturing factory this could be PPE for staff such as hairnets and gloves. The organisation will buy these in bulk and keep them in a stock cupboard, using these as and when they are required
- Non- stock items - items that are not stored and used right away. An example would be eggs- these will need to be put directly into the cakes as they would go off if bought in advance. Conclusion the categories are not mutually exclusive an item can be direct and operational, or indirect and stock. Different companies may use different systems to classify items of spend.

Example Introduction and Conclusion
Introduction
Procurement categorizes spend to efficiently manage resources and make strategic decisions. Three primary ways of categorizing procurement spend include distinguishing between direct and indirect spend, classifying expenditures as capital or operational, and categorizing items as stock or non- stock. These distinctions aid organizations in optimizing their procurement strategies for better resource allocation.

Conclusion:
In conclusion, categorizing procurement spend into direct vs. indirect, capital vs. operational, and stock vs. non-stock items is essential for strategic resource management.
While these categories provide a structured framework, they are not mutually exclusive, as an item can fall into multiple categories. For example, an item may be both direct and operational or indirect and stock. The flexibility of these categories allows organizations to tailor their procurement strategies based on their specific needs, ensuring efficient resource allocation and effective supply chain management. Different companies may adopt varying categorization approaches depending on their industry, size, and operational requirements.

Tutor notes:
- Because you've got 6 categories of spend to talk about you're only going to need 3-4 sentences for each. Providing you've said the category, explained what it is and given one example, you'll absolutely fly through this type of question
- You could also mention that it is useful to use categories of spend as this helps with budgeting. Different categories may also have different processes to follow for procuring the item (this could form part of your introduction or conclusion).

- This subject is LO 1.3.2 it's quite spread out in the text book but the main info is on p.49
- Note- different companies/ industries classify items of spend differently. Particularly packaging and salaries. Some say they're direct costs and some say they're indirect costs. Honestly, it's a hotly debated subject and I don't think there is a right or wrong. I'd just avoid those two examples if you can and stick to ones that aren't as contentious like eggs and PPE.

Reveal Solution Next Question

QUESTION: 7

Describe the main characteristics of, and differences between, procuring goods, services and construction works (25 points)

See Explanation section for answer.

Answer(s): A

Explanation:

- there are a lot of components to this question so I would take a good 5 minutes to write out some bullet points on the characteristics of each one, and on some differences. Then from your notes make this into an essay. The mark scheme isn't 100% clear on how many characteristics and differences you need to name, so try and keep an equal split between the two areas. You would probably need 2-3 characteristics of each, and 3 differences for a good score.
- Characteristics of goods: tangible, homogeneous, items tend not to perish quickly, can be stored
- Characteristics of services: intangible, heterogenous, inseparable (produced and consumed at the same time), no transfer of ownership, perish upon use (i.e. cannot be stored)

- Characteristics of construction work: project-based procurement, includes procuring both goods and services, complex procurement which has its own set of regulations (CDM2015).
- Differences between these
1) goods are not usually outsourced and services can be.
2) Complexity of the supply chain (goods and construction may have a complex supply chains, but service contracts usually only involve 2 parties).
3) Timescales construction work has a designated timescale but procurement of goods could be a one off or long-term contract, services is usually a long-term contract.

Example Essay
Introduction:
Procurement is a multifaceted field, and understanding the nuances between procuring goods,

services, and construction works is pivotal for effective management. This essay explores the main characteristics that differentiate these categories.
Tangible / Intangible:
Goods are tangible items that can be physically seen and touched. For instance, raw materials like wheat and sugar in a manufacturing organization are tangible goods. On the other hand, services are intangible--though the results can be observed, the service itself cannot be touched. An example is a cleaning contract for a factory; while the effects of the cleaning are visible, the service itself remains intangible. Construction is usually a mixture of tangible and intangible procurement; the tangible is the construction materials such as bricks and windows, and the intangible aspect is the labour to complete the project.
Heterogeneous / Homogeneous:
Goods are generally homogeneous, meaning they are always the same. For example, steel purchased for manufacturing purposes will always be the same. In contrast, services are heterogeneous, varying each time they are rendered. Customer service, for instance, is inherently different each time due to the dynamic nature of customer interactions. Construction could be either heterogeneous or homogeneous depending on the project is it a one off unique building, or is it a large housing estate of same-build properties?
Transfer of Ownership:
When goods are procured, there is a transfer of ownership. The product becomes the property of the buyer upon delivery and payment. In contrast, services do not involve a transfer of ownership as there is no physical entity to transfer. In construction the transfer of ownership is extremely complex and varies depending on the project. Usually the buyer will retain ownership of the land throughout the project, but on some occasions the construction company may take ownership for insurance purposes.
Storable (Separable/ Inseparable):
Goods are storable, allowing for purchase on one day and use on another. For example a factory can buy in plastic to be used to manufacture toys and this is stored in inventory until the time comes to make the toys. However, services are consumed at the point of purchase, making them inseparable. The service is bought and utilized simultaneously. Services cannot be stored. This is the same for construction.
Ability to Outsource:
Goods are rarely outsourced, as they are typically purchased directly from suppliers. Services, on the other hand, can be easily outsourced--examples include outsourcing finance, cleaning, or security services. Construction works are commonly outsourced, with external companies hired to execute projects.
Complexity of the Supply Chain:
Service contracts often involve a simple two-party relationship between the buyer and the supplier. Goods and construction, however, may have complex supply chains. For example, procuring a pen involves a supply chain with various steps, including the raw material supplier, manufacturer, and possibly a wholesaler. Construction works often feature a tiered supply chain with subcontractors playing crucial roles.
Construction as a Hybrid:
Construction procurement represents a hybrid, incorporating elements of both goods and services. It involves hiring a service, such as a bricklayer for laying bricks, while also procuring the tangible goods--bricks. Separating goods from services in construction is challenging, as they are often intertwined, and both aspects are paid for simultaneously.

Conclusion:

In conclusion, distinguishing between the procurement of goods, services, and construction works is essential for effective supply chain management. The tangible or intangible nature, heterogeneity, transfer of ownership, storability, outsourcing potential, and supply chain complexities offer a comprehensive framework for understanding the unique characteristics of each category. Recognizing these distinctions empowers organizations to tailor their procurement strategies to the specific challenges and dynamics associated with goods, services, and construction works.
Tutor Notes
- What a characteristic is can also be a difference. So for example you can say tangible is a characteristic of goods but tangibility is also the main difference between goods and services. So don't worry too much about which order to write stuff in, or doing clear sections for this type of essay. It all comes out in the wash.
- Other differences in procuring these include:
- Costs: procuring goods such as stationary for an office will be low-cost so may not require approval, but a service contract may require management sign off. Procuring construction projects tend to be huge sums of money
- Where the budget comes from: goods and services may be operational expenditure and construction works capital expenditure.
- The level of risk involved in the procurement: goods tends to be quite low risk and construction high risk.
- Types of contract involved: procuring goods may be very simple and just require a PO, services is more complex so may require a formal contract or Deed of Appointment. Construction projects will require a contract due to the high value and high risk of the purchase
- Legislation Goods = Sale of Goods Act, Construction - CDM Regulations 2015. Construction is much more heavily regulated than services or goods. Note CDM regulations isn't part of CIPS. It's occasionally referenced in various modules but you don't have to really know what it is. Just know it's the main legislation governing the construction industry. Construction - Construction Design and Management Regulations 2015 (hse.gov.uk)
- Study guide LO 1.3.1 p. 40, but mainly p. 52 for services. NOTE the title of this learning outcome includes construction and it is hardly mentioned in the study guide. Most of the above information on construction comes from my own knowledge rather than the book.

Reveal Solution Next Question

QUESTION: 8

Provide a definition of a stakeholder (5 points) and describe 3 categories of stakeholders (20 points).

See Explanation section for answer.

Answer(s): A

Explanation:

Essay Plan:
Definition of Stakeholder- someone who has a `stake' or interest in the company. A person or organisation who influences and can be influenced by the company.
Categories of stakeholders:
1) Internal Stakeholders- these people work inside the company e.g. employees, managers etc
2) Connected- these people work with the company e.g. suppliers, mortgage lenders

3) External Stakeholders these people are outside of the company e.g. the government, professional bodies, the local community.

Example Essay:
A stakeholder is an individual, group, or entity that has a vested interest or concern in the activities, decisions, or outcomes of an organization or project. Stakeholders are those who can be affected by or can affect the organization, and they play a crucial role in influencing its success, sustainability, and reputation. Understanding and managing stakeholder relationships is a fundamental aspect of effective organizational governance and decision-making and there are several different types of stakeholders.
Firstly, internal stakeholders are those individuals or groups directly connected to the daily operations and management of the organization. Internal stakeholders are key to success and are arguably more vested in the company succeeding. They may depend on the company for their income / livelihood. Anyone who contributes to the company's internal functions can be considered an internal stakeholder for example:
This category includes
1) Employees: With a direct influence on the organization's success, employees are critical internal stakeholders. Their engagement, satisfaction, and productivity impact the overall performance.
2) Management and Executives: The leadership team has a significant influence on the organization's strategic direction and decision-making. Their decisions can shape the company's future. Secondly, connected stakeholders are those individuals or groups whose interests are tied to the organization but may not be directly involved in its day-to-day operations. Connected stakeholders work alongside the organisation and often have a contractual relationship with the organisation. For example, banks, mortgage lenders, and suppliers. These stakeholders have an interest in the business succeeding, but not as much as internal stakeholders. It is important to keep these stakeholders satisfied as the organisation does depend on them to some extent. For example, it is important that the organisation has a good relationship with their bank / mortgage provider/ supplier as failing to pay what they owe may result in the stakeholders taking legal action against the organisation.
This category includes:
1) Shareholders/Investors: Holding financial stakes in the organization, shareholders seek a return on their investment and have a vested interest in the company's financial performance.
2) Suppliers and Partners: External entities providing goods, services, or collaboration. Their relationship with the organization impacts the quality and efficiency of its operations. Lastly external stakeholders are entities outside the organization that can influence or be influenced by its actions. This category includes anyone who is affected by the company but who does not contribute to internal operations. They have less power to influence decisions than internal and connected stakeholders. External stakeholders include the government, professional bodies, pressure groups and the local community. They have quite diverse objectives and have varying ability to influence the organisation. For example, the government may be able to influence the organisation by passing legislation that regulates the industry but they do not have the power to get involved in the day-to-day affairs of the company. Pressure groups may have varying degrees of success in influencing the organisation depending on the subject matter. This category includes:
1) Customers: With a direct impact on the organization's revenue, customers are vital external stakeholders. Their satisfaction and loyalty are crucial for the company's success.
2) Government and Regulatory Bodies: External entities overseeing industry regulations. Compliance with these regulations is crucial for the organization's reputation and legal standing. In conclusion, stakeholders are diverse entities with a vested interest in an organization's activities.

The three categories--internal, connected and external --encompass various groups that significantly influence and are influenced by the organization. Recognizing and addressing the needs and concerns of stakeholders are vital for sustainable and responsible business practices.
Tutor Notes
- The above essay is pretty short and to the point and would pass. If you want to beef out the essay you can include some of the following information for a higher score:
- Stakeholders can be harmed by, or benefit from the organisation (can affect and be affected by the organisation). For example a stakeholder can be harmed if the organisation becomes involved in illegal or immoral practices- e.g. the local community can suffer if the organisation begins to pollute the local rivers. The local community can also benefit from the organisation through increased employment levels.
- CSR argues organisations should respect the rights of stakeholder groups
- Stakeholders are important because they may have direct or indirect influence on decisions
- The public sector has a wider and more complex range of stakeholders as they're managed on behalf of society as a whole. They're more likely to take a rage of stakeholder views into account when making decisions. However, these stakeholders are less powerful i.e. they can't threaten market sanctions, to withdraw funding, or to quit the business etc.
- The essay doesn't specifically ask you to Map Stakeholders, but you could throw in a cheeky mention of Mendelow's Stakeholder Matrix, perhaps in the conclusion. Don't spend time describing it though- you won't get more than 1 point for mentioning it. You'd be better off spending your time giving lots and lots of examples of different types of stakeholders.
- Study guide p. 58

Reveal Solution Next Question

QUESTION: 9

What is meant by Stakeholder Mapping? Describe a tool that can be used by a Procurement Professional to map the stakeholders at their organisation (25 points)

See Explanation section for answer.

Answer(s): A

Explanation:

How to approach this question:

- Define stakeholder mapping completing an analysis of the stakeholders of an organisation and dividing them into categories depending on certain characteristics. This is often represented visually on a graph or matrix.
- Describe a Stakeholder mapping tool the most common tool is Mendelow's Stakeholder Matrix so I would recommend using this one. It is explained in detail in the study guide. However, the question is open so you could choose to describe another tool such as Edgar's Stakeholder Position Analysis if you so wished. You wouldn't be wrong choosing this, but honestly, I'd just go for Mendelow. You can't go wrong with Mendelow. Because the Matrix has 4 sections you can imagine you'd get 5 points for the definition of stakeholder mapping, and 5 points for each of the quadrants of the matrix.

Essay Plan:
Introduction - The reason why stakeholder mapping is important is because interests and expectations of stakeholder groups will be different and possibly conflicting. Mapping this allows an organisation to see the variety and decide on an appropriate management style for each stakeholder group.
Paragraph 1 - Mendelow's Power / Interest Matrix maps stakeholders based on their influencing power and the strength of their motivation to use that power. It uses a 2x2 grid and defines power as high or low and interest and high or low. It then provides four strategies for managing the stakeholders based on which quadrant of the grid the stakeholder falls into. These 4 categories are:
Paragraph 2 - Keep satisfied high power but low interest. If the stakeholder becomes dissatisfied or concerned their interest may peak. Examples include regulatory bodies, shareholders, senior management. The best approach is to keep them up to date so they are informed of what is going on, but do not burden them with information they do not need. Paragraph 3 - Manage Closely AKA Key players includes major customers, key suppliers, partners, senior management. These stakeholders need to know everything that is going on and approve of what is going on. The recommended strategy is early involvement and participation, and integrating their goals with yours. This group requires regular communication and meetings. You should take their opinions on board.
Paragraph 4- Monitor minimum effort required this is the low priority group as they have low power and low interest. Includes small volume suppliers and other organisational functions with no direct interest in your activities. This group does not need to receive regular communication. Paragraph 5 - Keep informed - high interest, but low power. If they're not kept in the loop and understand the need for decisions, they may lobby together to protect their interest if they feel threatened. Employee groups, suppliers and community groups may be in this category. This group should receive regular communication.
Conclusion - Mendelow created the matrix in 1991 and it is still used today. It is a popular management tool due to its simplicity. It's important to notes that stakeholders can move through the matrix- it isn't stagnant. For example, at the beginning of a project a manager in another department may be classed as `low priority' because they are seen to have no interest and no power in the project. However, as the project progresses the manager may become interested. They will then transfer into the keep informed category. Therefore, the matrix should be redone regularly throughout the lifetime of a project to capture any movements. The matrix should also be redone for each individual project it cannot be assumed that a stakeholder who had interest in one project would be interested in another.

Tutor Notes
- The above essay plan is basically the entire essay, I got carried away. The only thing you'd need to add into that is an example of a stakeholder for each of the sections! (e.g. the CEO is high power, but low interest stakeholder for the procurement department. He/ She doesn't care about the day to day operations but should be kept informed of any big news). For your examples you could use your own place of work.
- At level 4 you don't have to analyse the model, you just have to be able to memorise it and repeat it. Mendelow comes up again at Level 5 and 6 in a bit more detail. If you want to score super bonus points you could mention in your conclusion that the main disadvantage of Mendelow's Matrix is that it doesn't take into consideration the stakeholder's position on the project whether they're for it or against it. Therefore, it doesn't provide the full picture or provide much help on how to manage stakeholders. E.g. two stakeholders might both be in `manage closely' section, but one is for the project and the other against they'd need to be handled very differently!

- Study guide p. 65

Reveal Solution Next Question

QUESTION: 10

Sarah has recently been hired as the new Head of Procurement at Alpha Ltd, a manufacturer of small electronics such as hairdryers and alarm clocks. Alpha Ltd has a large factory based in Birmingham where many of the products are manufactured. One of the large pieces of machinery in the factory has recently broken and Sarah has been charged with replacing it as quickly as possible. Sarah is considering using the Whole Life Costing approach to this procurement.
What is meant by Whole Life Costing? (5 points). Discuss 5 factors that Sarah should consider when buying new machinery (20 points).

See Explanation section for answer.

Answer(s): A

Explanation:

How to approach this question
- I'd use clear headings with numbers for this one. It asks you for a definition and 5 factors. Number them. Makes it easy for you to write and easy for the examiner to mark.
- Don't go over 5 you won't get any extra points for this. So spend your time giving examples and explaining the 5 well, rather than naming more than 5.
Example Essay
As the new Head of Procurement at Alpha Ltd, Sarah faces the urgent task of replacing a critical piece of machinery in the company's Birmingham factory. Recognizing the complexity of the decision, Sarah contemplates utilizing the Whole Life Costing approach to ensure a comprehensive evaluation that goes beyond initial expenses. This essay explores the concept of Whole Life Costing and delves into five essential factors Sarah should consider when procuring new machinery.
Definition:
Whole Life Costing (WLC) is a procurement approach that considers the total cost associated with an asset throughout its entire lifecycle. Unlike traditional procurement methods that focus primarily on the initial purchase price, WLC evaluates all costs incurred from acquisition to disposal. This includes operational, maintenance, and disposal costs, providing a holistic perspective on the true financial impact of an asset over time.

Factors to Consider in Machinery Procurement

1) Initial Purchase Price:
While WLC looks beyond the initial cost, the purchase price remains a critical factor. Sarah should balance the upfront expense with the long-term costs to ensure the initial investment aligns with the overall financial strategy.
2) Operational Costs:
Sarah needs to analyze the ongoing operational costs associated with the new machinery. This includes energy consumption, routine maintenance, and potential repair expenses. Opting for energy-efficient and reliable equipment can contribute to substantial operational savings over the machine's lifespan, even though this may result in a higher up-front purchase price
3) Training and Integration:

The cost of training employees to operate and maintain the new machinery is a significant consideration. Sarah should assess how easily the equipment integrates into existing workflows and whether additional training programs are required, impacting both immediate and long-term costs.
4) Downtime and Productivity:
Evaluating the potential downtime and its impact on productivity is crucial. Sarah should assess the reliability and historical performance of the machinery to gauge its potential contribution to sustained production levels and minimized disruptions, impacting the overall operational efficiency.
5) Technology Upgrades and Adaptability:

Sarah should consider the machinery's adaptability to technological advancements and potential upgrades. Investing in equipment that allows for seamless integration with future technologies ensures that Alpha Ltd remains competitive and resilient in a rapidly evolving industry landscape. In conclusion, adopting a Whole Life Costing approach empowers Sarah to make informed decisions that align with Alpha Ltd's strategic goals. By considering factors beyond the initial purchase price, such as operational costs, training, downtime, and technology adaptability, Sarah ensures that the replacement machinery not only meets immediate production needs but proves to be a cost- effective and efficient asset throughout its entire lifecycle. The WLC approach safeguards against unforeseen financial burdens, fostering sustainable and informed procurement practices in the dynamic manufacturing environment.

Tutor Notes
- Whole Life Costing is on p.28
- Total Life Cycle Costs, Total Cost of Ownership and Life Cycle Costs are all practically the same thing. The book says they're slightly different, but don't get yourself bogged down in trying to remember the differences. Honestly, in the real world, people use this language interchangeably.
- Other factors you could have chosen to talk about include commissioning costs and disposal costs
- Don't worry if you feel CIPS breezed through this as a topic, they did. It's explained much better in L4M7. You can read more about it here: Whole Life Costing - What is Whole Life Costing | CIPS and here Whole-Life Cost: What it Means, How it Works (investopedia.com)

Reveal Solution Next Question

Viewing Page 2 of 9 Pages

Share your comments for CIPS L4M1 exam with other users:

Comments:

Name:

Amit 9/7/2023 12:53:00 AM

very detailed explanation !

HONG KONG

FisherGirl 5/16/2022 10:36:00 PM

the interactive nature of the test engine application makes the preparation process less boring.

NETHERLANDS

Chiranthaka 9/20/2023 11:15:00 AM

very useful.

Anonymous

SK 7/15/2023 3:51:00 AM

complete question dump should be made available for practice.

Anonymous

Gamerrr420 5/25/2022 9:38:00 PM

i just passed my first exam. i got 2 exam dumps as part of the 50% sale. my second exam is under work. once i write that exam i report my result. but so far i am confident.

AUSTRALIA

Kudu hgeur 9/21/2023 5:58:00 PM

nice create dewey stefen

CZECH REPUBLIC

Anorag 9/6/2023 9:24:00 AM

i just wrote this exam and it is still valid. the questions are exactly the same but there are about 4 or 5 questions that are answered incorrectly. so watch out for those. best of luck with your exam.

CANADA

Nathan 1/10/2023 3:54:00 PM

passed my exam today. this is a good start to 2023.

UNITED STATES

1 10/28/2023 7:32:00 AM

great sharing

Anonymous

Anand 1/20/2024 10:36:00 AM

very helpful

UNITED STATES

Kumar 6/23/2023 1:07:00 PM

thanks.. very helpful

FRANCE

User random 11/15/2023 3:01:00 AM

i registered for 1z0-1047-23 but dumps qre available for 1z0-1047-22. help me with this...

UNITED STATES

kk 1/17/2024 3:00:00 PM

very helpful

UNITED STATES

Raj 7/24/2023 10:20:00 AM

please upload oracle 1z0-1110-22 exam pdf

INDIA

Blessious Phiri 8/13/2023 11:58:00 AM

becoming interesting on the logical part of the cdbs and pdbs

Anonymous

LOL what a joke 9/10/2023 9:09:00 AM

some of the answers are incorrect, i would be wary of using this until an admin goes back and reviews all the answers

UNITED STATES

Muhammad Rawish Siddiqui 12/9/2023 7:40:00 AM

question # 267: federated operating model is also correct.

SAUDI ARABIA

Mayar 9/22/2023 4:58:00 AM

its helpful alot.

Anonymous

Sandeep 7/25/2022 11:58:00 PM

the questiosn from this braindumps are same as in the real exam. my passing mark was 84%.

INDIA

Eman Sawalha 6/10/2023 6:09:00 AM

it is an exam that measures your understanding of cloud computing resources provided by aws. these resources are aligned under 6 categories: storage, compute, database, infrastructure, pricing and network. with all of the services and typees of services under each category

GREECE

Mars 11/16/2023 1:53:00 AM

good and very useful

TAIWAN PROVINCE OF CHINA

ronaldo7 10/24/2023 5:34:00 AM

i cleared the az-104 exam by scoring 930/1000 on the exam. it was all possible due to this platform as it provides premium quality service. thank you!

UNITED STATES

Palash Ghosh 9/11/2023 8:30:00 AM

easy questions

Anonymous

Noor 10/2/2023 7:48:00 AM

could you please upload ad0-127 dumps

INDIA

Kotesh 7/27/2023 2:30:00 AM

good content

Anonymous

Biswa 11/20/2023 9:07:00 AM

understanding about joins

Anonymous

Jimmy Lopez 8/25/2023 10:19:00 AM

please upload oracle cloud infrastructure 2023 foundations associate exam braindumps. thank you.

Anonymous

Lily 4/24/2023 10:50:00 PM

questions made studying easy and enjoyable, passed on the first try!

UNITED STATES

John 8/7/2023 12:12:00 AM

has anyone recently attended safe 6.0 exam? did you see any questions from here?

Anonymous

Big Dog 6/24/2023 4:47:00 PM

question 13 should be dhcp option 43, right?

UNITED STATES

B.Khan 4/19/2022 9:43:00 PM

the buy 1 get 1 is a great deal. so far i have only gone over exam. it looks promissing. i report back once i write my exam.

INDIA

Ganesh 12/24/2023 11:56:00 PM

is this dump good

Anonymous

Albin 10/13/2023 12:37:00 AM

good ................

EUROPEAN UNION

Passed 1/16/2022 9:40:00 AM

passed

GERMANY